1. STpad
2. Features

Features

• Home
• Route
  • Adding Route(s) through the Template file - General information
    • Adding Route(s) through the Template file
  • Deleting a Route
  • Resetting a Route
  • Editing a Route
  • Running a free Route
  • Running a forced by piece Route
    • Navigating a forced by piece Route
  • Running a forced by inspection route
    • Navigating a forced by inspection route
  • Searching a Route
  • Searching in a Route
  • Filtering the routes using the custom fields
  • Filtering the inspections in a route
• Results
  • Exporting the results
  • Filtering the results
  • Searching a result
  • Viewing the details of the inspection result
• Tools
  • Adding a Tool
  • Tool parameters
  • Deleting a Tool
  • Editing a Tool
  • Searching a Tool
• Tool inspections
  • Adding a Tool inspection
  • Cm/Cmk ISO parameters
  • SPC parameters
  • ISO 6789:2003 parameters
  • ISO 6789-2:2017 parameters
  • ISO 5393 parameters
  • CAM/Cpk CNOMO parameters
  • JJF 1610:2017 parameters
  • Calibration parameters
  • VDI/VDE 2465-2 - tool based parameters
  • VDI/VDE 2465-2 - position based parameters
  • Adding a multistep inspection
  • Cm/Cmk multistep parameters
  • CAM/Cpk CNOMO multistep parameters
  • Adding a Tool check Inspection through the Template file
  • Deleting Tool inspection
  • Editing Tool inspection
  • Running Tool inspection
    • Results category
    • Summary category for Cm/Cmk and CAM/Cpk CNOMO
    • Summary category for SPC
    • Summary for ISO 6789:2003
    • Summary for ISO 6789-2:2017
    • Summary for ISO 5393
    • Summary for VDI/VDE 2465-2
    • Summary for JJF 1610:2017
    • Torque/angle statistic category
    • Trace category
  • Calibrating Power Focus
  • Calibrating PowerMACS
  • Calibrating generic controllers
• Joints
  • Adding a Joint
  • Joint parameters
  • Deleting a Joint
  • Editing a Joint
  • Searching a Joint
• Joint inspections
  • Adding a Joint inspection
  • Cp/Cpk ISO parameters
  • SPC (joint) parameters
  • Adding a Joint check inspection trough the template file
  • Deleting Joint inspection
  • Editing Joint inspection
  • Running Joint inspection
    • Summary category for Cp/Cpk
    • Summary category for SPC
    • Trace category
• Parts
  • Adding a Part
  • Part parameters
  • Deleting a Part
  • Editing a Part
  • Searching a Part
• Part inspections
  • Adding a Visual inspection
  • Attribute inspection parameters
  • Binary inspection parameters
  • Instructions inspection parameters
  • Picture inspection parameters
  • Adding a Dimensional inspection
  • Cp/Cpk dimensional parameters
  • SPC dimensional parameters
  • Deleting a Part inspection
  • Editing Part inspection
  • Running Part inspection
    • Results category for Attribute inspection
    • Results category for Binary inspection
    • Results category for Instructions inspection
    • Results category for Picture inspection
    • Results category for Dimensional inspection
    • Statistics category for Dimensional inspection
    • Summary category for Cp/Cpk
    • Summary category for SPC
• Measuring Devices
  • Deleting a Measuring Device
  • Searching a Measuring device
  • IRC-Connect
    • Pairing the IRC-Connect
    • Connecting the device to the IRC-Connect
    • Connected transducer
  • STwrench
    • Pairing STwrench
    • Connecting the device to the STwrench
    • Scanning a barcode with STwrench
  • STbench
    • Connecting the device to the IRC-Connect
    • Connected transducers
  • STpad cable adapter
    • Connecting the device to the STpad cable adapter
    • Connected transducer
• Controllers
  • Adding a controller
  • Controller parameters
  • Deleting a controller
  • Editing a controller
  • Searching a Controller
• Quick Programming - General Information
  • Running a quick programming
• Links
  • Opening a link
• Configuration
  • Main data
    • Attribute lists
      • Adding an Attribute list
      • Deleting an Attribute list
      • Editing an Attribute list
    • Binary lists
      • Adding a Binary list
      • Deleting a Binary list
      • Editing a Binary list
    • Assignable causes lists
      • Adding an Assignable causes list
      • Deleting an Assignable causes list
      • Editing an Assignable causes
    • Corrective actions lists
      • Adding a Corrective actions list
      • Deleting a Corrective actions list
      • Editing a Corrective actions list
    • Users
      • Adding a User
      • Deleting a User
      • Editing a User
    • Traces
      • Adding a Trace
        • Importing a Raw Trace
        • Acquiring a Raw Trace
        • Deleting a Raw Trace
        • Simulating a Trace
      • Editing a Trace
      • Deleting a Trace
  • External systems
    • API configuration
    • Open Protocol
    • SIGOP/SCOUP
      • Configuring the SIGOP/SCOUP integration
      • Importing a route from the SIGOP/SCOUP file
      • Exporting results to SIGOP/SCOUP file
    • Tool tracker
      • Configuring the Tool tracker
  • Import / Export
    • Templates
      • Generating the template file for tool check inspections
      • Generating the template file for joint check inspections
      • Generating the template file for routes
    • Importing tool check inspections on the device
    • Importing joint check inspections on the device
    • Importing routes on the device
    • Exporting results
  • Inspection values
    • SPC Rules
    • Common values
      • Editing inspection common values
    • ISO 5393 default values
      • Editing ISO 5393 default values
    • Quick programming default values
      • Editing quick programming default values
  • General settings
    • Common
    • Label
    • Measure screen
    • Reaction bar
    • Test run
  • Maintenance
    • License
      • Activating a license
    • Backup
    • Restore
    • Logging configuration
    • Exporting application logs
    • Exporting STbench logs
    • Export STbench dumps
    • Export all
• Isolated mode
  • Doing a test