Summary for JJF 1610:2017

A

Add notes button

B

End test button

C

Statistic parameters

The table displays the results of each calibration point of high torque rate reading and low torque rate reading. The available parameters are:

  • Target [Nm]: target value of each calibration point of high torque rate and low torque rate.

  • X [Nm]: mean value of the acquired measurements of high torque rate and low torque rate.

  • Relative tolerance [%]: relative tolerance of high torque rate reading (δH) and low torque rate reading (δL).

  • Repeatability [%]: repeatability of high torque rate reading (RH) and low torque rate reading (RL).

  • U [%]: expanded uncertainty.

To print the test report: on the upper-right corner of the Summary category, tap Print report.