Generating the template file for tool check inspections

Template file for Tool Check Inspections is the source file that makes inspection(s) from the own PC through an external device (i.e. USB storage device).

Do the following procedure to create inspection(s) from the own PC:

  1. Insert the USB storage device into the USB port of the device.

  2. From the Home page, tap Configuration > Import / Export > Templates > Template file for Tool Check Inspections.

    If the USB storage device is not connected to the USB port of the device, the message External device not found is displayed.

    Insert the USB storage device into the USB port of the device and continue the procedure.

  3. Tap Generate. At the end of the process, the message The file was correctly generated on the selected drive is displayed. Then, tap OK

    If the template file is already stored on the USB storage device, the message The file already exists. Do you want overwrite? is displayed.

    Tap OK to overwrite the old template file.

    Tap Cancel to go back to the Template file for Tool Check Inspections page.