Restore

  1. Insert the USB storage device into the USB port of the device.

  2. In the Home page, tap Configuration > Maintenance > Restore.

    If the USB storage device is not connect to the USB port of the device, the message External device not found is displayed.
    Insert the USB storage device into the USB port of the device and continue the procedure.

  3. In the Select file for restore dialog box, select the backup file to restore. Then tap Next.

  4. In the Confirmation required dialog box, tap OK.

    After the restoring of the database the application will be closed.

  5. In the Restore dialog box, tap OK when the restore is completed.
    At the end of the restore of the database, the device switches off.

  6. Switch on the device. From the Home page tap Configuration > Maintenance > License, then tap on the Reset ID button.
    The application can now be used with the restored database.

The restore is run only if the battery level of the STpad is greater than 50%, or the device is connected to the power supply.

It is not possible to restore the backup of a database version 04.00 on previous versions of the application.

It is not possible to restore the STpad backup on the STpalm and vice versa.