Results category for Attribute inspection
In the Results category of the Run inspection page, the following is displayed:
A | Batch count | B | Command icons |
C | Results list | D | Add button |
E | Attribute list values |
On the left side of the Results category, the Value drop down list allows to select the attribute, configured in the attribute list linked to the inspection. After selecting a value, tap Add.
To add a custom value:
In the configuration of the Attribute list, deselect the Force selection from list check box. Thereby, in the Result page, the Custom value text box is displayed. In the text box, type the attribute to use. Then select OK or NOK and tap Add.
The custom value is use in the inspection, but it is not add to the Attribute list
On the right side of the Results category, a table shown all the selected values.
To delete one result (when enabled by external software), select it and tap the following icon: 
.
To delete the whole set of results (when enabled by external software), tap the following icon: 
.
To add a comment to a result, select it and tap the following icon: 
.
To add a picture to a result, select it and tap the following icon: 
.
