1. ToolsTalk 2
2. Configuration
3. Configuration for FlexSystem and Synchronized tightening

Configuration for FlexSystem and Synchronized tightening

• Working with synchronized tightening
• Working with the Hardware Configuration Tab
  • Tool Box for Synchronized tightening
  • Tool Box for FlexSystem
  • Channel Numbering
• Working with the Tightening Program Tab
  • Tightening Program Menu
  • Multistep Tightening Introduction
    • Tightening Program History
  • Adding a Multistep Program
  • Copying and Pasting tightening programs
  • Importing a Multistep Program
  • Deleting a Multistep Program
  • Comparing Multistep Tightening Programs
  • Global Tightening Program
  • Tightening Editor
    • Tightening Steps
    • Step Monitors
    • Step Restrictions
    • Sync Point
    • Utilities
    • Result Reporters
    • Multistep Template
  • Multistep Tightening Program Properties
  • Approval Statuses
• Working with the Sync Mode Tab
  • Adding a Sync Mode
  • Deleting a Sync Mode
  • Handling Tightening Sync Mode Configuration
    • Reject management
  • Handling Loosening Sync Mode Configuration
  • Running a Loosening Sync Mode
  • Copying and Pasting Batch sequences, Sync modes and Sources
  • Exporting a Sync Mode
  • Importing a Sync Mode
• Working with the Batch Sequence Tab
  • Batch Sequence Configuration Workspace
  • Batch Sequence Configuration Menu
  • Adding a New Batch to a Batch Sequence
  • Copying and Pasting Batch sequences, Sync modes and Sources
  • Exporting a Batch Sequence
  • Importing a Batch Sequence
  • Deleting a Batch in a Batch Sequence
• Working with the Sources Tab
  • Source Tightening Overview
  • Creating a Source Tightening
  • Creating a Source Batch
  • Significant Positions
    • Configuring Significant Positions to Read in Barcode String
    • Combining Identifier Strings
    • Saved Positions
  • Copying and Pasting Batch sequences, Sync modes and Sources
  • Exporting a Source Batch or a Source Tightening
  • Importing a Source Batch or a Source Tightening
• Working with the Configurations Tab
  • Adding a Configuration
  • Importing a Configuration
  • Deleting a Configuration
  • Configuration Types
    • Internal I/O
    • I/O Expander
    • Operator Panel
    • Stacklight
    • Indicatorbox
      • Configuring the Indicatorbox
    • Tool Configuration
    • Scanner
      • Scanner Configuration
    • Socket Selector
      • Viewing/Editing or Creating a Socket Selector Configuration
      • Socket Selector Control Switch
    • General Virtual Station
• Working with the Tools Tab
• Working with the Virtual Station Tab
  • Virtual Station Overview
  • Virtual Station - Properties
  • Assigning License Types and Features to a Virtual Station
  • Assigning a Task to a Virtual Station
  • Virtual Station - Protocols
    • Open Protocol
  • Fieldbus Mapping in a Virtual Station
    • Fieldbus Diagnostics
  • Assigning Accessories to a Virtual Station
    • Adding an Accessory to a Virtual Station
  • Unassigning an Accessory from a Virtual Station
  • Assigning a General Virtual Station Configuration
• Working with the Controller Information Tab
  • Controller Information and IAM Menu
  • Software Menu
  • Licenses
  • Hardware Configuration
  • Export and Import
  • Automated Backup
  • System Health Monitor
  • Server Connection Status
• Working with the Settings Tab
  • Preferences
    • PIN Settings
      • Configuring the PIN
      • Accessing the Controller When Locked By PIN
      • PIN Code for Station Setup
    • Tool service alarms
  • Server Connections
    • Controller Communication with the License Server
    • Controller Communication with the ToolsNet Server
    • Configuring the Remote Logging Connection
  • Controller Date and Time
  • Events Menu
    • Event Configuration
    • Adding Events to the Library
  • Extended Logging
• Working with Fieldbus, SoftPLC and Acyclic Data Tab
  • Fieldbus Overview
    • Fieldbus Configuration Parameters
    • Fieldbus Definitions
    • Fieldbus Data Types
    • Fieldbus Sizes
  • Overview Configuration Tab
    • Fieldbus settings
      • Fieldbus Parameters General
        • Configuring tightening results without handshake protocol
      • Fieldbus parameters for DeviceNet
      • Fieldbus parameters for EtherNet/IP and EtherNet/IP M40
      • Fieldbus parameters for ProfinetIO
      • Fieldbus parameters for Profibus
      • Fieldbus parameters for CC Link
      • Fieldbus parameters for CC Link IE
      • Acyclic Data in General Fieldbus Settings
        • Adding Data Instance Size
          • Deleting an Acyclic Fieldbus Mapping
    • SoftPLC settings
      • Changing the Offset
    • Virtual Station Mapping Configuration
      • Adding a Fieldbus Mapping
      • Adding an Acyclic Fieldbus Mapping
        • Editing Start and End Instances
      • Viewing a Fieldbus Map assigned to a Virtual Station
  • Fieldbus Configuration Tab
    • Creating, Importing and Deleting a Fieldbus Map
      • Creating a New Fieldbus Map
      • Importing a Fieldbus Map
      • Deleting a Fieldbus Map
    • Creating a Fieldbus Signal Configuration
      • Fieldbus Configuration Parameters
      • Async Data
        • Tightening Results in Async Data
        • Configuring Async Data
    • Understanding the Fieldbus Configuration and the Fieldbus Map
    • Automatic Placement of Fieldbus Maps in the Process Data Frame
    • Automatic Placement of Items in the Fieldbus Map
    • Editing or Viewing an Item in the Fieldbus Map
    • Deleting Items From the Fieldbus Map
    • Exporting a Fieldbus Map
  • Working with Acyclic Fieldbus Configuration
    • Acyclic Data Configuration Overview
      • Adding a New Acyclic Data Configuration
        • Acyclic Data Configuration Menu
        • Configure Acyclic Data
          • Common Area Overview
            • Adding Acyclic Result Configuration in Common Area
            • Deleting Acyclic Result Configuration from Common Area
          • Bolt or Channel Area Overview
            • Adding Acyclic Result Configuration in the Bolt or Channel Area
            • Creating Copies in the Bolt or Channel Area
            • Deleting Acyclic Result Configuration from Bolt or Channel Area
    • Example of a Tightening Result
  • SoftPLC Configuration Tab
    • SoftPLC Overview
    • Creating SoftPLC Signal Configurations
    • SoftPLC Virtual Station Mapping Configuration
    • Creating a New SoftPLC Project
      • Creating SoftPLC User Data
      • Setting Up SoftPLC Communications
    • Importing a SoftPLC Project Template