Export and Import
The export and import function is used to export the events and tightening results accessible in the Results menu for analysis in external programs, as well as allowing transfer of tightening program, batch, and controller configurations between controllers.
The command Export can be used for the following reasons:
Exporting tightening results and events for further processing.
Exporting log files for debug assistance from an Atlas Copco service engineer.
Exporting the entire controller configuration that can be used to copy the configuration to another controller.
Comparing two exported configurations to see differences.
Select a controller in the Plant structure
.Go to Controller
.The workspace area displays the Controller menu.
Click the Export button to export one of the following:
Parameter
Description
Export
Exports all controller information.
Export Configuration
Exports settings and configurations.
Export Tool Log
Exports logs (tightenings and hardware information) from connected tools. Available for SRB, TBP, STB and QST-M.
The export consists of atlas_tool_i.zip and ExportInfo.txt
Select the location for saving the export file, click OK.
Select a controller in the Plant structure
.Go to Controller
.The workspace area displays the Controller menu.
To import controller configurations, click the Import command button.
Click Open file. Select the file to import.
The import file must be a previously exported file.
When using the import function, all settings for tightening program, batch, accessories, and controller are replaced by the settings from the import file. However, settings for network, PIN, and results and events are not imported.
