General Virtual Station
In the Plant structure workspace
, select a controller.In the tab menu bar in the workspace area, select the Configurations icon
.The workspace area displays a list of configurations.
Double-click on a configuration row that has General Virtual Station in the Type column.
Alternatively, select Add to create a new General Virtual Station configuration .
Parameter | Description |
|---|---|
Name | Optional name for the configuration |
Description | Optional configuration description |
When using Synchronized tightening or a Flex controller the following parameter is also visible in the General Virtual Station configuration.
Fixtured Stations
Auto Enable can use one of the following settings, the default setting is Never.
Setting | Description |
|---|---|
Never | Input Enable Operation must be set high to be able to run a tightening. |
Always | It is always possible to run tightenings regardless of the status of input Enable Operation. |
To apply the General Virtual Station configuration, assign it to a Virtual Station in the Virtual Station
section.
Only unassigned General Virtual Station configurations can be deleted.
