Tool Configuration
With the Tool Configuration it is possible to activate and configure various functions related to the tool. Each tool configuration can be mapped to a tool in Hardware Layout Configuration.
To view or edit a tool configuration menu:
Select a controller in the Plant structure workspace
. Click Configurations
in the Menu bar.The workspace area displays the current accessory configurations.
Add a new configuration or double click on an existing configuration with the type being a tool configuration.
Make necessary configurations. The parameters are described in each section.
The tool configuration is divided into the following menus:
Menu | Description |
|---|---|
Properties | Configuration name and description and a tool type filter. |
General | General parameters for the tool. |
Dual transducer (only available for FlexSystem) | Dual transducer functionality. |
Tool LEDs (only available for Synchronized tightening) | |
Buzzer (only available for Synchronized tightening) |
Properties
The Tool configuration should be given a unique name. An optional description field is also available.
The accessory configuration list displays all configurations in an alphabetical order
To view or edit a tool configuration menu:
Select a controller in the Plant structure workspace
.Select the Configuration icon
in the menu bar.The workspace area shows a list of all the current accessory configurations.
Double-click on the name of the selected Tool configuration.
The workspace area shows the details of the current configuration and is divided into different menus, one for each topic.
Enter a configuration name and a description in the Properties menu.
Select a tool type from the Filter by tool type drop-down menu.
As the number of tools grow, the number of menus grow as well. To increase the visual comfort in the workspace, it is possible to filter menus and only show what is relevant for one selected tool type. The filter is set in the Properties menu. If No tool is selected, all the possible tool configuration parameters are displayed.
General
Use Start source to set how to start the tool.
Start source | Description |
|---|---|
Trigger only | Press the tool trigger to start the tightening. |
Trigger OR Push | Press the tool trigger or push the tool against the joint to start the tightening. |
Trigger AND Push | Press the tool trigger and push the tool against the joint to start the tightening. |
Push only | Push the tool against the joint to start the tightening. |
Digital input | Using an external digital input signal to trigger the start of the tightening. |
Safety trigger | Press the safety trigger (both Main Trigger and Extra Trigger) to start the tightening. |
Dual transducers
Only available for FlexSystem.
Dual transducer | Description |
|---|---|
Primary torque transducer | The torque transducer used for tightening. |
Primary angle transducer | The angle transducer used for tightening. |
Required dual torque | If the connected tool must have dual torque transducers (that are not disabled) to be able to run a tightening. |
Required dual angle | If the connected tool must have dual angle transducers (that are not disabled) to be able to run a tightening. |
Secondary torque in trace | If the values from the secondary torque transducer is included in the trace. |
Secondary angle in trace | If the values from the secondary angle transducer is included in the trace. |
Enable double torque restriction | If the double torque transducer restriction is active. |
Maximum torque difference | The limit for the double torque difference restriction. |
Enable double angle restriction | If the double angle transducer restriction is active. |
Maximum angle difference | The limit for the double angle difference restriction. |
