Présentation

• Conventions
• Règlement général sur la protection des données (GDPR)
• Responsabilités et avertissements
  • Responsabilité
  • Avertissements
• À propos du Guide d'utilisation
• Historique des révisions
• Conditions préalables
• Présentation du système
  • Vue d’ensemble du produit
    • Basculement
    • Équilibrage de la charge
    • Auto-réparation
  • Vue d'ensemble du menu
    • Tableau de bord
    • Coffrets
    • Périphériques
    • Logiciel
    • Outils
    • Accessoires
    • Licences
    • Données
    • Utilisateurs
    • Réglages
• Outils pris en charge
• Accessoires pris en charge
• Périphériques pris en charge
• Profil utilisateur

Conventions

Dans un souci de compréhension pour l'utilisateur, certaines conventions de formatage sont utilisées dans ce document. Les conventions de formatage utilisées sont listées ci-dessous.

Règlement général sur la protection des données (GDPR)

Ce produit offre la possibilité de traiter des informations personnellement identifiables telles que le nom d'utilisateur du système, le rôle et l'adresse IP. Le but de cette capacité de traitement est d'améliorer le contrôle de la qualité grâce à la traçabilité et à la bonne gestion des accès.

Si vous décidez de traiter des données personnelles vous devez connaître et respecter les règles de protection des données personnelles correspondantes, y compris le GDPR dans l'UE ainsi que les autres lois, directives et réglementations applicables. Atlas Copco ne peut en aucun cas être tenu responsable de quelconque utilisation faite par vous du produit.

Responsabilités et avertissements

• Responsabilité
• Avertissements

Responsabilité

De nombreux événements dans l'environnement d'exploitation peuvent affecter le processus de serrage et nécessiteront une validation des résultats. Conformément aux normes et règlements applicables, nous vous invitons par la présente à contrôler le couple installé et le sens de rotation après tout évènement susceptible d'avoir une incidence sur le résultat du serrage. Voici des exemples non exhaustifs de ces évènements :

• installation initiale du système d'outillage

• modification de lot de pièces, boulon, lot de vis, outil, logiciel, configuration ou environnement

• modification des branchements pneumatiques ou électriques

• changement dans l'ergonomie de la ligne, le processus, les procédures de qualité ou les pratiques

• changement d'opérateur

• tout autre changement ayant une incidence sur le résultat du processus de serrage

Le contrôle devra :

• Garantir que les conditions d'assemblage n'ont pas changé en raison d'évènements susceptibles d'avoir une incidence sur le processus.

• Être effectué après l'installation initiale, la maintenance ou la réparation du matériel.

• Intervenir au moins une fois par prise de poste ou à toute autre fréquence adéquate.

Avertissements

AVERTISSEMENT

Risque de dégâts matériels ou d'accidents graves

Veiller à lire, assimiler l'ensemble des instructions avant d'utiliser l'outil. Le non-respect de l'ensemble des instructions peut entraîner un choc électrique, un incendie, des dégâts matériels ou un accident corporel grave.

• Lisez toutes les consignes de sécurité fournies avec les différentes parties du système.

• Lisez toutes les notices d'installation, d'exploitation et de maintenance des différentes parties du système.

• Lisez l’ensemble de la réglementation locale concernant le système et les différentes parties qui le composent.

• Conservez l'ensemble des instructions et consignes pour pouvoir les consulter ultérieurement.

À propos du Guide d'utilisation

Le présent manuel d’utilisation décrit comment installer et configurer le ToolsControl.

Il s'adresse à quiconque utilise ou entretient le ToolsControl.

Historique des révisions

Conditions préalables

Toute personne souhaitant en savoir plus sur ToolsControl pourra bénéficier de la lecture de ce guide d'utilisation.

Pour une parfaite compréhension des aspects techniques décrits dans ce guide d'utilisation, il est recommandé de posséder :

• une connaissance des techniques de serrage

• une certaine expérience dans l'utilisation des anciennes versions de Power Focus

Présentation du système

• Vue d’ensemble du produit
  • Basculement
  • Équilibrage de la charge
  • Auto-réparation
• Vue d'ensemble du menu
  • Tableau de bord
  • Coffrets
  • Périphériques
  • Logiciel
  • Outils
  • Accessoires
  • Licences
  • Données
  • Utilisateurs
  • Réglages

Vue d’ensemble du produit

Le portail ToolsControl est un ensemble d'applications destinées à fonctionner dans un environnement de type cloud. Le programme d'installation de ToolsControl comprend tout ce qui est nécessaire pour créer cet environnement, pour rationaliser le processus d'installation et fournir une solution clé en main optimisée pour le cas d'utilisation de ToolsControl. Il est ainsi facile de mettre en place un système ToolsControl sans avoir à installer et à configurer séparément un environnement complet de type cloud. Il suffit de disposer d'un matériel informatique adapté ou d'un système permettant de fournir des machines virtuelles (VM). Le système ToolsControl comprend des coffrets de serrage qui sont créés à la demande et gérés par le portail ToolsControl et les autres services. L'un de ces services, qui est inclus, est un serveur de licences qui gère toutes les licences nécessaires pour que les outils puissent communiquer avec les coffrets via ToolsControl.

Pour les conventions de dénomination, le portail ToolsControl équivaut à ToolsControl ou au système ToolsControl mentionné dans ce document, qui constitue le portail où les utilisateurs accèdent aux fonctions de ToolsControl.

Les méthodes d'installation des nœuds ToolsControl comprennent l'installation autonome sur PC/serveur et l'installation en cluster. Une installation autonome signifie qu'il n'y a qu'un seul nœud ToolsControl en fonctionnement. Une installation en cluster comprend plusieurs nœuds ToolsControl. En général, une installation typique de cluster comprend trois serveurs ToolsControl.

ToolsControl fonctionne à l'intérieur d'un cluster, offrant des avantages tels que la gestion du basculement, la répartition de la charge et l'auto-réparation. En utilisant une solution en cluster, ToolsControl n'a besoin d'aucun dispositif physique, à l'exception des serveurs nécessaires au fonctionnement du cluster. Les avantages de l'utilisation de ToolsControl résident dans le fait qu'il y a moins de matériel physique, ce qui libère de l'espace au sol pour d'autres usages, et qu'il n'y a pas de raccords physiques, ce qui signifie qu'aucun câble d'alimentation ou d'Ethernet n'est nécessaire.

Deux scénarios d'installation sont appliqués pour chaque méthode d'installation : Le scénario d'installation 1 fait référence à une installation directe de ToolsControl sur un PC ou un serveur. Le scénario d'installation 2 fait référence à l’installation de ToolsControl sur une même machine virtuelle.

L'image ci-dessous illustre un exemple de vue d'un cluster ToolsControl en cours d'exécution.

Basculement

Le basculement dans ToolsControl signifie que si un évènement imprévu se produit, comme une coupure de courant ou une perte de la connectivité réseau à un serveur, le système ne subit pas de temps d'arrêt important. Toute application ToolsControl fonctionnant sur d'autres serveurs n'est pas affectée par l'évènement. Si un tel évènement se produit, les applications concernées sur le serveur défaillant migreront vers un serveur disponible. Le temps d'indisponibilité de l'application est limité au temps de détection du basculement (10-35 secondes) et au temps de redémarrage de l'application.

Les fonctions de basculement ne sont prises en charge que dans les installations en cluster de ToolsControl.

Équilibrage de la charge

la répartition de la charge fait partie intégrante d'un cluster. Une charge du cluster est automatiquement répartie afin que toutes les applications ne tournent pas sur le même serveur. la répartition de la charge est contrôlé par le coffret et a lieu avant le démarrage d'une application. Au démarrage, l'application est planifiée pour un nœud spécifique. L'approche générale de la répartition de la charge consiste à répartir les applications entre tous les serveurs, de sorte que chaque serveur dispose d'un nombre similaire d'applications en cours d'exécution.

La répartition peut être configurée pour se produire automatiquement ou manuellement. la répartition de la charge ne concerne que les applications qui démarrent ou redémarrent. Les applications en cours d'exécution ne sont jamais déplacées dans le seul but de répartir la charge. Cette conception vise à minimiser les interruptions des opérations en cours. Si possible, répartissez pendant une pause de maintenance afin d'éviter une interruption des opérations.

Pour plus d’informations sur le fonctionnement de ToolsControl avec la répartition de la charge, consultez Répartiteur de charge externe.

Auto-réparation

L'auto-réparation est la capacité d'auto-réparation ou de redémarrage automatique en cas d'erreur logicielle, ce qui est également l'un des avantages de l'utilisation d'un cluster. En s'exécutant au sein d'un cluster, l'application est automatiquement redémarrée si elle quitte anormalement.

Le processus d'auto-réparation est autonome et se déroule sans nécessiter d'interventions extérieures.

Vue d'ensemble du menu

Ce paragraphe présente la description du menu de ToolsControl.

Les utilisateurs peuvent accéder aux évènements par le biais de la cloche et à leur profil utilisateur par le biais du profil .

Tableau de bord

La page d'accueil du portail apparaît sous la forme d'un Tableau de bord qui affiche l'état du système. L'état du système comprend une visualisation du cluster et de tout ce qui est en cours d'exécution sur celui-ci. Le Tableau de bord affiche trois principaux types d'informations, l'état général du cluster, les informations sur les nœuds et les informations sur les applications d'entretien et les coffrets déployés.

Une fonction de répartition est située en haut à droite de la page du Tableau de bord, à côté des informations sur le stockage des données. L'utilisateur peut configurer la répartition de la charge à l'aide de cette fonction.

Une installation autonome de ToolsControl sur un seul PC/serveur peut afficher une partie des informations décrites ci-dessous.

État du système

Chaque nœud du Tableau de bord affiche son nom, son adresse IP, ainsi que des informations sur la mémoire utilisée et disponible et sur les ressources du processeur utilisées. Les informations en ligne / hors ligne sont également disponibles.

Les déploiements se font sous deux formes : Applications d'entretien et coffrets. Les applications d'entretien peuvent uniquement être redémarrées, tandis que les coffrets ont la possibilité d'être soit redémarrés, soit arrêtés, soit démarrés.

Applications d'entretien et coffrets

Les plus petites unités du Tableau de bord sont les applications individuelles déployées sur le nœud et les coffrets qui se connectent au nœud. Tous les utilisateurs peuvent redémarrer les applications d'entretien en cas de besoin. Ils peuvent également démarrer, arrêter ou redémarrer chaque coffret si nécessaire.

Coffrets

Les coffrets sont presque entièrement gérés à partir de la page Coffrets. Utilisez la page Coffrets pour accéder à l'interface utilisateur d'un coffret, accéder aux informations et aux actions du coffret, et gérer les licences de chaque coffret.

Sélectionnez pour créer de nouveaux coffrets. Sélectionnez le menu , puis sélectionnez Structure du coffret pour créer et gérer des groupes de coffrets, ou sélectionnez Paramètres par défaut pour modifier les paramètres par défaut des coffrets créés à partir du moment de la modification et dans le futur. Les modifications n'affectent pas les coffrets déjà créés. Les paramètres par défaut comprennent les unités, la langue, le fuseau horaire, et les connexions serveur par défaut à ToolsTalk et ToolsNet.

Vue Coffrets

La vue Coffrets répertorie tous les coffrets connectés, avec ou sans informations sur les groupes. Dans cette vue, les utilisateurs peuvent également ajouter un coffret à un groupe ou le supprimer.

Saisissez du texte dans le champ Recherche pour filtrer et trouver des coffrets. Les éléments suivants sont recherchés :

• Noms de groupes

• Noms de coffrets

• Numéros de ports

• Numéros des versions logicielles

Chaque coffret comporte trois vues secondaires : Coffret, Réglages et Licences. L'icône d'engrenage à droite de la page du coffret permet aux utilisateurs d'accéder aux options Modifier le nom, Supprimer et Remise à zéro usine.

La modification du nom de la commande par le biais de l'option Modifier le nom modifiera également le nom affiché à l'intérieur du coffret.

Sélectionnez Exporter vers CSV pour exporter une liste de tous les coffrets séparés par des virgules.

L'interface homme-machine (HMI) du Coffret affiche l'interface utilisateur normale du coffret qui peut être utilisée pour modifier les paramètres du coffret comme sur tout autre coffret. Le HMI est également nécessaire pour configurer les postes virtuels avec des entrées telles que des outils, des licences et des programmes.

La vue Réglages présente des informations sur les versions du logiciel du coffret, les instantanés créés et les mappages de ports.

Cette vue se compose de trois sous-sections : Logiciel, Instantanés et Ports. La sous-section du logiciel affiche le nom du coffret et la version actuelle du logiciel, ainsi que les boutons permettant de mettre à niveau le coffret. La mise à niveau d'un coffret permet à l'utilisateur de sélectionner une version logicielle plus récente parmi les versions logicielles téléchargées.

Les utilisateurs peuvent créer ou supprimer des instantanés pour le coffret actuel et les instantanés sont enregistrés dans la sous-section Instantanés.

Dans la sous-section Ports, l'utilisateur peut modifier les ports que le coffret présente au monde extérieur. Tous les coffrets partagent la même plage de numéros de port, et la plage de numéros de port de chaque poste virtuel doit être unique. Une plage de numéros de port pour un poste virtuel ne doit pas chevaucher une plage de numéros de port pour un autre poste virtuel.

Licences

Les licences doivent être affectées au coffret avant d'affecter des licences dans le HMI du coffret. Les Licences comprennent deux sous sous-section : Type de poste virtuel et caractéristiques du poste virtuel. Chaque sous-section affiche des informations détaillées sur le nombre de licences utilisées et le nombre de licences disponibles pour le type de poste dédié ou la fonction de poste dédiée, respectivement. Les utilisateurs peuvent modifier les licences selon la configuration prévue en éditant le nombre de licences.

Périphériques

La vue Périphériques affiche les appareils raccordés à ToolsControl. Un périphérique est un appareil externe, matériel ou logiciel, ou les deux, qui se raccorde à ToolsControl pour étendre ses fonctions. Les informations relatives à chaque périphérique raccordé, notamment l'adresse IP, le nom d'hôte du périphérique, le type de périphérique, les versions logicielles, le nombre de raccordements et les informations sur la liaison montante.

La passerelle Bluetooth, le hub E/S et le convertisseur CAN sont les types de périphériques typiques qui sont pris en charge. Certains types de périphériques, tels que la passerelle Bluetooth ou le convertisseur CAN, fournissent des informations sur la liaison montante, qui indiquent l'adresse IP à laquelle il se connecte. En général, la liaison montante est le Single IP de ToolsControl. Une passerelle Bluetooth permet aux outils dotés de la fonction Bluetooth de se connecter en Wi-Fi. Les outils qui se connectent via la passerelle Bluetooth sont également répertoriés dans la liste des outils avec les autres outils Wi-Fi.

Une erreur de configuration courante est que l'adresse IP de la liaison montante est réglée sur une adresse différente de celle de la Single IP de ToolsControl.

Logiciel

La vue Logiciel est utilisée pour afficher et gérer deux types de logiciels différents : le coffret et l'application. Lorsque vous sélectionnez un type de logiciel, un tableau affiche les informations correspondantes.

Le logiciel du coffret est utilisé pour créer un nouveau coffret ou mettre à niveau un coffret existant.

Le logiciel d'application est la version du logiciel système en cours d'utilisation ou prête à être activée. Ce logiciel est un ensemble qui contient toutes les applications qui composent une version spécifique de ToolsControl. Dans le paragraphe informations sur le Logiciel actif, la version indique la version du logiciel qui est utilisée. Le paragraphe Logiciel inactif répertorie toutes les versions de logiciels qui ne sont pas utilisées mais qui peuvent être mises à niveau ou rétrogradées.

Le logiciel d'application téléversé n'est pas automatiquement activé. Pour activer le logiciel, sélectionnez le menu et Activer.

Outils

La vue Outils répertorie tous les outils avec de brèves informations :

Par défaut, la liste des outils est organisée par le nom du coffret auquel ils sont mappés. Les outils non mappés sont par défaut situés en haut de la liste. La liste peut être triée et filtrée.

Les utilisateurs peuvent mapper ou démapper un ou plusieurs outils vers ou depuis des coffrets. Pour mapper ou démapper simultanément un ou plusieurs outils, sélectionnez les outils et, dans la case Options de masse, sélectionnez Mapper à un coffret ou Démapper.

Utilisez le champ Recherche pour filtrer et trouver des outil.

Sélectionnez Exporter vers CSV pour exporter une liste de tous les outils vers un fichier texte séparé par des virgules.

Informations sur l'outil

Pour obtenir des informations détaillées sur un outil, sélectionnez-le. La vue Informations sur l'outil se trouve sur le côté droit de la page.

La disponibilité du champ dépend de l'outil.

Accessoires

Dans la vue Accessoires, tous les accessoires sont affichés avec leurs propriétés :

• Étiquettes

• Type

• Numéro de série

• États

• Informations sur le mappage de coffret

Les états habituels sont les suivants :

• Connecté (fonctionne pleinement)

• Hors ligne (a été connecté mais est désormais hors tension)

• En ligne (est connecté à ToolsControl et n’est pas mappé à un coffret)

Un accessoire n'est pas amovible si l'état est En ligne ou Connecté. Les accessoires sont organisés en fonction du coffret sur lequel ils sont mappés. Par défaut, l'ordre est basé sur la structure du coffret. Plusieurs filtres et la fonction de recherche sont à la disposition des utilisateurs pour gérer les accessoires. Les utilisateurs peuvent soit mapper soit démapper un ou plusieurs accessoires sur le coffret sélectionné. Les utilisateurs peuvent également classer les accessoires en fonction des mappages ou des informations d'état des accessoires.

Des informations détaillées s'affichent après avoir sélectionné un accessoire, les options pour gérer l'accessoire sont également listées. La gestion implique :

• Mappage

• Démappage

• Modification de l’étiquette

• Retrait de l’étiquette

L'accessoire n'est amovible que s'il est hors ligne. Un accessoire ne peut pas être mappé ou démappé s'il est hors ligne. Toute modification appliquée à un accessoire est automatiquement affichée dans la vue dédiée.

Licences

La vue Licences présente des informations détaillées sur les Types de postes virtuels et les Fonctionnalités des postes virtuels.

Pour ouvrir la vue Gestionnaire de licences, sélectionnez l'engrenage à côté du titre de la page. La vue Gestionnaire de licences affiche l'ID hôte permettant aux utilisateurs d'enregistrer le gestionnaire de licences dans le portail de licences Atlas Copco. Les utilisateurs peuvent télécharger des licences à partir de la vue du gestionnaire de licences.

Données

ToolsControl fournit des rapports statistiques dans la vue Données, et les rapports sont au format OpenMetrics. Les données sont collectées pour les entités internes et connectées au cluster. Toutes les applications de ToolsControl proposent des données sur un point de terminaison spécifique

• Processeur principal

• Mémoire RAM

• Utilisation disque des nœuds et des conteneurs

• Temps de réponse des nœuds et des outils

Utilisateurs

La page Utilisateurs liste les informations relatives aux utilisateurs qui se sont connectés au système. Seuls les utilisateurs disposant d'un compte Administrateur peuvent accéder à cette page. Les utilisateurs disposant d'un compte d'administrateur peuvent gérer les mots de passe de n'importe quel utilisateur dans la page Utilisateurs.

Sélectionnez la flèche à côté d'un compte d'utilisateur pour voir les Renseignements sur l'utilisateur et les Détails du compte :

• Nom d'utilisateur

• E-mail

• Prénom

• Nom

• Service d'authentification (interne pour les utilisateurs créés dans le portail ToolsControl, externe pour les utilisateurs qui se connectent via Microsoft Active Directory)

• Dernière connexion

• Administrateur (case à cocher)

Les informations concernant les utilisateurs externes ne peuvent pas être mises à jour.

Les utilisateurs disposant d'un compte administrateur peuvent vérifier et gérer le compte à l'aide de la flèche ou créer des comptes d'utilisateurs en sélectionnant Créer. Les utilisateurs qui n'ont pas les droits d'administrateur ne peuvent pas voir la page Utilisateurs. Ils peuvent accéder à leur propre profil utilisateur, modifier leur mot de passe ou se déconnecter du portail ToolsControl en sélectionnant profil dans le coin supérieur droit.

Réglages

La vue Réglages contient les sous-sections suivantes :

• Langue

• Réseau

• Exportation/Importation

• Événement

• Durée

• Fichiers journaux

• Authentification

• HTTPS

La page Langue propose des options de langue. Un changement de langue n'a pas d'incidence sur les fonctions de ToolsControl. ToolsControl est compatible avec les langues suivantes :

• Anglais

• Tchèque

• Allemand

• Allemand (Autriche)

• Espagnol

• Français

• Coréen

• Italien

• Japonais

• Portugais

• Russe

• Suédois

• Chinois

La page Réseau contient des paramètres de Single IP et des configurations de sous-réseaux multiples. La Single IPne peut pas être la même que les autres adresses IP qu'un serveur utilise pour faire fonctionner le cluster.

La page Exportation/Importation permet d'exporter ou d'importer la plupart des configurations du système. L'exportation crée un fichier d'archive qui comprend la plupart des configurations du système ToolsControl. Les configurations comprennent des coffrets, des outils et des accessoires. Le fichier d'archive d'exportation peut être utilisé comme sauvegarde et importé ultérieurement pour restaurer la configuration à un état connu. Il peut également être utilisé pour transférer la configuration vers une nouvelle installation de ToolsControl.

La page Évènements fournit des informations détaillées sur les évènements. Les évènements sélectionnés seront affichés sous forme de notification dès leur réception. Les notifications disparaissent automatiquement après quelques secondes. Les trois éléments paramétrables sont les suivants :

• Nombre maximum d'évènements sauvegardés dans la base de données

• Niveau d'évènement le plus bas sauvegardé dans la base de données

• Niveau de priorité défini pour afficher les notifications

La page Heure contient l'adresse IP et les informations d'état pour chaque serveur NTP. Les utilisateurs peuvent ajouter ou supprimer un serveur NTP dans la vue Heure. Au lieu d'utiliser un serveur NTP, les utilisateurs peuvent également modifier manuellement la date et l'heure.

La page Fichiers de journaux permet d'exporter les journaux du système sous forme d'archive au format GZIP. Cette fonctionnalité est destinée à être utilisée par un utilisateur final lors de l'installation du ToolsControl. L'exportation comprend les journaux suivants du système, par exemple : journaux du coffret, journaux du portail, journaux d’entretien.

La page Authentification contient trois sous-paragraphes : Active Directory, Filtre de recherche d'utilisateur et Authentification. Active Directory comprend toutes les informations où la connexion AD est définie et l'utilisateur admin qui utilise ToolsControl pour y accéder. Filtre de recherche d'utilisateur spécifie le paramètre LDAP pour filtrer la recherche d'utilisateur. L'authentification peut être désactivée via le paragraphe Authentification.

Contactez le service informatique pour connaître les détails de la configuration de Active Directory avant de connecter ToolsControl à un Active Directory.

La page HTTPS comprend les détails du certificat affecté par ToolsControl. L'utilisateur peut créer un CSR de l'autorité de certification (AC CSR), téléverser un certificat ou générer un certificat sur cette page.

Outils pris en charge

Les outils pris en charge sont les suivants :

• STB (ETP et ETV)

• TBP/TBP-S

• SRB

• STwrench/STRwrench

• Clé dynamométrique (MWR)

• ICB-A, ITB-A et ITB-P (seuls les coffrets dont le logiciel est ultérieur à la version 3.9.4 sont compatibles avec ces outils par le biais d'une connexion Wi-Fi)

• Outils filaires via Power Focus S (uniquement un coffret avec la version du logiciel 3.11 ou ultérieure)

Accessoires pris en charge

Les accessoires pris en charge sont les suivants :

• Sélecteur 6

• Hub E/S

• Sélecteur de douilles (via convertisseur CAN)

• Panneau de commande (via convertisseur CAN)

• Colonne lumineuse (via convertisseur CAN)

• Module d'extension E/S (via convertisseur CAN)

Périphériques pris en charge

Les périphériques pris en charge sont les suivants :

• Passerelle Bluetooth

• Hub E/S

• Convertisseur CAN

• Kit MWR

Profil utilisateur

Tous les utilisateurs de ToolsControl peuvent à tout moment accéder au profil utilisateur via l'icône de portrait située en haut à droite de l'interface utilisateur.

Les utilisateurs peuvent accéder au nom du compte utilisateur, à l'e-mail enregistré et à Mon profil grâce au menu déroulant. La page Mon profil répertorie les informations détaillées de l'utilisateur actuel, notamment son nom d'utilisateur, son e-mail, son prénom et son nom de famille. L'utilisateur peut mettre à jour ses informations et modifier son mot de passe dans cette page.

Installation et mise à niveau

• Aperçu de l’installation
  • Cybersécurité
  • Avant l’installation
  • Système d’exploitation
  • Configuration minimale requise
• Installation de ToolsControl
  • Scénarios d'installation 1 - Installation directe
    • Préparation du scénario d'installation 1
    • Préparation d'une clé USB ToolsControl
    • Initialisation du scénario d'installation 1
    • Installation du système
  • Scénarios d'installation 2 - Machine virtuelle
    • Préparation du scénario d'installation 2
    • Copie du fichier ToolsControl sur VM
    • Initialisation du scénario d'installation 2
    • Installation du système

Aperçu de l’installation

En fonction du matériel cible pour l'installation de ToolsControl, deux scénarios d'installation sont disponibles. Le processus détaillé pour chaque scénario est présenté.

• Scénario 1 : Installation directe

• Scénario 2 : Installation par machine virtuelle

Cybersécurité

AVERTISSEMENT

Risque de perte de contrôle du système et d'exposition des données exclusives

• N'installez pas le produit avec une interface ou une connexion directe à un réseau public hors du contrôle de l'utilisateur de ce produit, comme par exemple Internet.

• Assurez-vous que les systèmes connectés au produit sont sous votre contrôle total. Veillez à ce que ces interfaces et systèmes soient protégés par un ou plusieurs pare-feu de sécurité, avec une authentification physique et numérique appropriée, un contrôle d'accès et d'autres mesures de sécurité nécessaires appliquées dans l'environnement du produit, par exemple le réseau numérique, afin d'accéder au produit et de l'utiliser en toute sécurité.

• Le produit doit être isolé des parties du ou des réseaux qui ne sont pas conçues ou requises pour le produit.

Avant l’installation

Les préparatifs suivants sont nécessaires avant l'installation :

Si une version précédente de ToolsControl est installée sur le serveur, effectuez une mise à niveau. Sinon, effectuez une nouvelle installation. Notez qu'une nouvelle installation sur un PC/serveur effacera tous les logiciels installés et les données stockées sur celui-ci.

• Veiller à ce que le PC/serveur ou l’ordinateur utilisant réponde à la configuration matérielle requise.

• Planifiez les activités d'installation et sélectionnez le type d'installation approprié.

• La connexion au réseau et les paramètres de mise en réseau (les tableaux suivants) sont disponibles.

• L'enregistrement de la licence pour le nouveau serveur est disponible.

Paramètres réseau

Assurez-vous que les paramètres de configuration réseau suivants sont disponibles.

Adresses IP statiques utilisées, une pour chaque nœud. Un déploiement de ToolsControl peut être un nœud unique (une seule VM ou machine) ou un cluster de VM pour une haute disponibilité avec une fonctionnalité de basculement. Si vous déployez un cluster, il doit avoir un nombre impair de nœuds. Les tailles valides sont 1, 3, 5, etc.

Single IPSingle IP est uniquement requis pour les clusters. Les installations à nœud unique n'ont pas besoin de Single IP car elles peuvent réutiliser l'IP du nœud.

Logiciel à installer/télécharger

DHCP. Le DHCP n'est autorisé que SI les adresses IP des nœuds peuvent être réservées dans le serveur DHCP. L'adresse IP d'un nœud ToolsControl ne doit jamais changer.

Masque de réseau (si pas DHCP)

Passerelle (si pas DHCP)

DNS (si pas DHCP)

Système d’exploitation

Pour un produit ToolsControl, le système d'exploitation de base pour l'exécution de ToolsControl correspond à la dernière version d'Ubuntu avec une assistance à long terme. Ubuntu est l'une des distributions Linux les plus adaptées et les plus stables, ce qui donne au ToolsControl une base optimisée pour fonctionner.

Une nouvelle installation sur un ordinateur autonome ou un serveur ne nécessite aucun système d'exploitation préinstallé. Au cours du processus d'installation, tout logiciel installé ou toute donnée stockée sur le disque dur sera effacé et le système d'exploitation ToolsControl sera installé automatiquement.

Configuration minimale requise

La configuration minimale requise est valable aussi bien pour l'installation sur un PC/serveur que pour l'installation sur un cluster.

• Processeurs 4 cœurs

• 6 Go de RAM

• Disque SSD 100 Go

• Au moins 1 interface réseau

• Port USB ou lecteur de CD/DVD pour une installation directe

• Un clavier, une souris et un écran

L'installation du système nécessite également un certain nombre d'adresses IP en fonction de la planification de l'installation.

Caractéristiques matérielles recommandées

* Intel Core i5 @ 1,5 GHz ou plus performant

** Intel Xeon @ 2,0 GHz ou plus performant

Les threads désignent le nombre de threads matériels dans l'unité centrale. Cela correspond généralement à deux fois le nombre de cœurs.

Installation de ToolsControl

Ce paragraphe fournit des informations sur l'installation de ToolsControl et les configurations nécessaires pour activer le serveur. Dépend des cas d'utilisation, deux scénarios d'installation inclus. Chaque scénario d'installation couvre la préparation de l'installation, la copie du fichier ISO de ToolsControl, l'initialisation de l'installation et le processus d'installation.

• Le scénario d'installation 1 décrit l'installation de ToolsControl sur un PC/serveur autonome

• Le scénario d'installation 2 décrit l’installation de ToolsControl sur une machine virtuelle

Scénarios d'installation 1 - Installation directe

Lors de l'installation directe sur un PC ou un serveur, l'installation de ToolsControl écrase tout système d'exploitation existant sur la machine. Préparez un support d'installation avec le fichier ISO de ToolsControl, par exemple une clé USB ou un DVD.

Préparation du scénario d'installation 1

• Assurez-vous que l'installation n'aura pas d'impact sur l'environnement de production, sauvegardez les données si nécessaire.

• Assurez-vous que le PC/serveur est accessible et n'est pas verrouillé par un logiciel.

• La clé USB ou le DVD bootable et le fichier ISO de ToolsControl sont disponibles.

Préparation d'une clé USB ToolsControl

Cette étape ne s'applique qu'à l'installation en utilisant une clé USB. L'utilisation du périphérique DVD pour installer le TollsControl nécessite un processus similaire.

Si l'utilisation de la clé USB sécurisée est prévue pour l'installation, localisez le fichier d'installation ToolsControl et copiez-le sur la clé USB en utilisant des programmes flash spéciaux comme « Rufus » ou « Balena Etcher » sous Windows, pour créer une fonction de démarrage de la clé USB. Assurez-vous que la clé USB est en bon état et dispose d'un espace suffisant.

Remarque : Si vous utilisez « Rufus », veillez à sélectionner « Écrire en mode DD Image », sinon l'installation échouera.

Le fichier ISO de ToolsControl a un format spécial qui peut provoquer un rapport d'échec d'installation lors de l'étape de vérification si vous utilisez « Balena Etcher ». Cet avertissement peut être ignoré.

Initialisation du scénario d'installation 1

Pour initialiser l'installation, assurez-vous que les étapes suivantes sont réalisées.

Installation du système

Si nécessaire, exécutez le processus d'installation et la configuration pour tous les nœuds supplémentaires. Une fois la configuration terminée, sélectionnez OK pour redémarrer la machine. Une fois le redémarrage terminé, le nouveau nœud apparaîtra dans le tableau de bord du portail ToolsControl.

Une fois que tous les nœuds ToolsControl ont été joints au cluster, redémarrez tous les nœuds pour vous assurer que tous les composants ToolsControl fonctionnent comme prévu. Si vous n'effectuez pas cette action, vous risquez de perdre des données.

Scénarios d'installation 2 - Machine virtuelle

Créez une machine virtuelle (VM) pour chaque nœud du cluster sur des serveurs distincts. Assurez-vous que la configuration de chaque VM répond aux exigences minimales du système.

Configurez la VM avec un disque dur SCSI et un lecteur de CD/DVD. Le disque dur doit être un disque de données vierge avec suffisamment d'espace pour les besoins de stockage. Configurez la VM pour qu'elle démarre à partir du lecteur de CD/DVD et monte l'ISO de ToolsControl.

Préparation du scénario d'installation 2

• Avant d'installer ToolsControl sur une machine virtuelle (VM), préparez les étapes suivantes.

• Assurez-vous que le serveur est connecté au réseau prévu.

• Assurez-vous qu'un compte utilisateur valide avec des privilèges d'administration est disponible.

• Le fichier ISO de ToolsControl est disponible.

• La VM permettant d'exécuter l'installation est installée et paramétrée correctement.

Copie du fichier ToolsControl sur VM

Initialisation du scénario d'installation 2

Pour initialiser l'installation, assurez-vous que les étapes suivantes sont réalisées.

Installation du système

Si nécessaire, exécutez le processus d'installation et la configuration pour tous les nœuds supplémentaires. Une fois la configuration terminée, sélectionnez OK pour redémarrer la machine. Une fois le redémarrage terminé, le nouveau nœud apparaîtra dans le tableau de bord du portail ToolsControl.

Une fois que tous les nœuds ToolsControl ont été joints au cluster, redémarrez tous les nœuds pour vous assurer que tous les composants ToolsControl fonctionnent comme prévu. Si vous n'effectuez pas cette action, vous risquez de perdre des données.

Configuration

• Authentification et configuration dans ToolsControl
• Configurations réseau
• Configuration HTTPS
  • Affichage des certificats
  • Signer le CSR de ToolsControl
  • Rénovation des certificats
• Créer un coffret
• Installer la licence
  • Obtenir le numéro d'identification de l'hôte du gestionnaire de licences
  • Créer et téléverser la licence
  • Valider la licence téléversée
• Couplage des outils Bluetooth
• Affectation des outils et des licences
  • Affecter une licence
  • Ajouter des outils au coffret
  • Échanger un outil
• Affecter des accessoires à un coffret
• Changer le port de l'Open Protocol
• Régler les réglages par défaut du coffret
• OpenTelemetry
• Répartiteur de charge externe

Authentification et configuration dans ToolsControl

Tous les nœuds (PC ou VM) doivent être redémarrés une fois de plus avant toute configuration pour une nouvelle installation. Le système ToolsControl peut mal fonctionner si cette étape est omise !

Authentification

L'utilisateur doit activer l'authentification à partir de l'onglet Authentification de la page Paramètres, et se connecter avant d'utiliser ToolsControl. Le compte administrateur par défaut est admin. L'utilisateur admin doit choisir un nouveau mot de passe lors de sa première connexion.

Configuration

Effectuez tous les réglages nécessaires dans la page Réglage avant de mettre en service un nouveau serveur ToolsControl.

Configurations réseau

Paramètres réseau : La page Réseau contient le paramètre Single IP, les paramètres de configuration multi-sous-réseaux et le paramètre de répartiteur de charge externe. La Single IP doit être configurée lorsqu’un cluster est utilisé mais est facultative pour une installation avec un seul nœud. Single IP ne peut pas être la même que les autres adresses IP qu'un serveur utilise pour faire fonctionner le cluster. Deux protocoles de routage, BGP (Border Gateway Protocol) et OSPF (Open Shortest Path First), permettent des configurations multi-sous-réseaux. Sélectionnez un protocole de routage pour permettre l'utilisation d'une Single IP d'un sous-réseau différent pour ToolsControl. BGP ou OSPF doit être configuré si des nœuds se trouvent dans des sous-réseaux différents sur le réseau, par exemple, s'il existe des routeurs entre les nœuds.

Multi-sous-réseau : Pour accéder aux options multi-sous-réseaux, il faut d'abord sélectionner l'un des deux protocoles de routage. Les protocoles pris en charge sont BGP et OSPF. Ce choix dépend de la technologie compatible avec les routeurs du réseau. Quelle que soit l'option choisie, la configuration doit correspondre à la configuration à l'intérieur des routeurs et se fait nœud par nœud, ce qui signifie qu'il y aura une colonne pour chaque nœud du cluster. Lorsque l'on modifie le nombre de nœuds, les options multi-sous-réseau doivent également être mises à jour. Sans cela, les nouveaux nœuds ne pourront pas héberger la Single IP, ce qui dégradera le basculement.

BGP : Lorsque vous sélectionnez BGP, trois champs sont obligatoires pour chaque nœud, l'adresse du routeur, et l'ASN (numéro de système autonome) du nœud et du routeur. Tous les champs doivent être remplis pour que les paramètres prennent effet et fonctionnent comme prévu. L'ASN du nœud peut être le même pour tous les nœuds. Le dernier champ, le mot de passe MD5, est facultatif. Ce champ, ainsi que l'ASN du routeur, doit correspondre à la configuration du routeur correspondant. Le routeur doit également être configuré pour gérer le protocole BGP et l'adresse du nœud / ASN du nœud doit être configuré en tant que voisin BGP. BGP vous permet d'ajouter un routeur secondaire facultatif.

OSPF : Lorsque vous sélectionnez OSPF, aucun champ obligatoire n'est requis, ce qui s'explique par le fonctionnement du protocole. Deux champs facultatifs sont disponibles pour chaque nœud : l'adresse du routeur et le mot de passe MD5. Si l'adresse du routeur est vide, le système OSPF basé sur la diffusion sera utilisé. Comme pour BGP, le mot de passe doit correspondre à la configuration du routeur s'il est utilisé.

Répartiteur de charge externe : cette option nécessite un environnement en cluster. Lorsque vous sélectionnez Répartiteur de charge externe, aucun champ n'apparaît pour la configuration.

Configuration HTTPS

HTTPS peut être utilisé pour crypter le trafic de bout en bout entre un navigateur et le portail ToolsControl. L'utilisation de HTTPS nécessite un certificat auquel le navigateur web fait confiance, et ce de trois manières :

• Pour faire confiance manuellement au certificat autosigné de ToolsControl dans le navigateur.

• Pour utiliser une autorité de certification racine de confiance (Root CA) afin de créer une chaîne de confiance. Idéalement, la Root CA est déjà approuvée par tous les navigateurs de la société.

• Pour téléverser un certificat non-AC signé par une Root CA de confiance.

Affichage des certificats

Pour afficher le certificat en cours d'utilisation, accédez à l'onglet HTTPS dans Paramètres.

Avant d'activer Rediriger HTTP vers HTTPS, veillez à valider le fonctionnement du certificat. Un certificat défectueux peut empêcher l'accès au portail ToolsControl.

La vue affiche :

• Rediriger HTTP vers HTTPS : lorsque cette option est désactivée, il est possible d'accéder à ToolsControl Portal via HTTP. Lorsque cette option est activée, toutes les données envoyées entre un serveur du portail ToolsControl et un navigateur web sont cryptées par HTTPS. Les tentatives d'accès au portail ToolsControl via HTTP sont automatiquement redirigées vers HTTPS.

• Émis par :

  L'émetteur du certificat actuellement utilisé. Il s'agit de l'un des éléments suivants :

  • ToolsControl Issuing CA, si le certificat actuel a été délivré par une AC qui a été signée par une Root CA

  • ToolsControl Intermediate CA, si le certificat n'a pas été émis par une AC signée. Un symbole d'avertissement est affiché s'il n'a pas été validé par une Root CA.

  • Le signataire du certificat, si un certificat signé non-AC est utilisé.

• Common Name (CN):

  Par défaut, ceci contient le nom d'hôte du premier nœud ToolsControl.

• Alternative Name (SAN): (SAN, Subject Alternative Names)

  Tout nom supplémentaire pour lequel le certificat est valable. Il comprendra toujours les adresses IP de chaque nœud, et en plus, tous les noms de DNS supplémentaires que l'utilisateur a ajoutés lors de la génération du certificat.

• Émis :

  Date de délivrance du certificat.

• Expire :

  Date d'expiration du certificat.

Signer le CSR de ToolsControl

Obtention du CSR (Certificate Signing Request (Demande de signature de certificat))

Pour obtenir le certificat ToolsControl signé par une Root CA de confiance, suivez la procédure suivante :

Téléverser un CSR signé

Pour téléverser le CSR signé vers ToolsControl, procédez comme suit :

Si le certificat signé non-AC est téléversé avec succès, le certificat est immédiatement actif. Attendez quelques secondes et actualisez la page pour voir les nouvelles données du certificat dans Paramètres > HTTPS.

Si un certificat signé par une AC a été téléversé avec succès, ToolsControl dispose d'une AC signée qui peut émettre des certificats de confiance.

Générer un certificat

Pour générer un nouveau certificat de confiance, procédez comme suit :

Séparez les noms d’IP / de DNS du SAN uniquement par des virgules, sans espace entre les deux.

Les certificats émis contiennent toujours la Single IP et les IP des nœuds, quel que soit le SAN spécifié.

Si un certificat a été généré avec succès, la vue devrait être actualisée avec les nouveaux noms alternatifs ajoutés et les données Émis et Expire actualisées.

Utilisation de certificats auto-validés

Au lieu de signer l'AC émettrice de ToolsControl, il est possible de demander à ToolsControl d'émettre un certificat auto-validé. Tous les utilisateurs devront alors explicitement faire confiance au certificat dans le navigateur pour accéder au portail ToolsControl avec le cryptage HTTPS.

Un avertissement s'affiche dans le navigateur, indiquant que la connexion n'est pas sécurisée car le certificat n'est pas émis par un fournisseur de confiance. Cliquez sur Avancé, ou sur une alternative équivalente, et choisissez de continuer quand même. Le cryptage HTTPS est alors activé.

En ajoutant manuellement l'AC émettrice de ToolsControl à la liste des Root CA de confiance du navigateur, vous ne verrez plus les avertissements. La procédure d'ajout d'une AC de confiance varie en fonction du navigateur et du système d'exploitation de l'ordinateur.

Rénovation des certificats

Expiration des certificats

Les certificats d'émetteur auto-validés et validés par la Root CA émis par ToolsControl ont une validité de 13 mois. ToolsControl gère également le renouvellement automatique des certificats en émettant un nouveau certificat une semaine avant l'expiration de l'ancien. Il est également possible de générer manuellement un nouveau certificat à tout moment, le cas échéant.

Pour les certificats auto-validés, tous les utilisateurs doivent accepter manuellement le certificat renouvelé dans le navigateur. Pour les certificats d'émetteur validés par la Root CA, ou si les utilisateurs ont ajouté manuellement l'AC de l'émetteur de ToolsControl à la liste des AC de l'émetteur explicitement approuvées, il n'est pas nécessaire de faire quoi que ce soit. Tous les certificats renouvelés seront automatiquement approuvés, à moins que votre Root CA n'expire ou ne soit supprimée. L'AC de l'émetteur est valable 20 ans.

Modifier l'IP ou le nom de DNS

Si la Single IP ou un nom de DNS est modifié, l'administrateur doit générer un nouveau certificat avec les nouveaux paramètres.

Créer un coffret

Avant de commencer, assurez-vous que le logiciel du coffret est téléchargé sur le portail ToolsControl. Si le logiciel cible n'est pas disponible, suivez les étapes suivantes.

La longueur du nom du coffret ne doit pas dépasser 32 caractères et varie en fonction de la langue choisie. ToolsControl ne prend pas en charge « & » et « \ ».

Pour créer un coffret, suivez une des étapes.

Installer la licence

ToolsControl utilise le Embedded License Server (serveur de licences embarqué - serveur de licences interne au cluster) pour assurer le suivi des licences et de leur validité.

Le serveur de licences possède un ID hôte unique et l'utilise pour vérifier les licences téléchargées. Cet identifiant est généré lors de l'installation de ToolsControl.

Toute version de ToolsControl nécessite une licence active pour fonctionner correctement.

Aperçu du processus d'installation de la gestion des licences :

Obtenir le numéro d'identification de l'hôte du gestionnaire de licences

Pour obtenir le numéro d'identification de l'hôte du gestionnaire de licences, il est nécessaire de connaître les informations relatives au Gestionnaire de licences. Ouvrez la fenêtre du Gestionnaire de licences à partir de la page Licences en cliquant sur l'icône de l'engrenage. La fenêtre Gestionnaire de licences s’ouvre.

La page du Gestionnaire de licences contient l'ID hôte, le type d'ID, etc. L'utilisateur peut également télécharger un fichier de licence pré-créé. Enregistrez l'ID hôte car il est nécessaire pour enregistrer le serveur.

Créer et téléverser la licence

Valider la licence téléversée

Pour valider la licence installée, allez à la page Licence dans le ToolsControl. Les licences Type de poste virtuel et Fonctionnalité de poste virtuel sont répertoriées. Le nombre de licences du canal ToolsControl est affiché dans la vue Outils.

Couplage des outils Bluetooth

Les utilisateurs peuvent coupler les outils Bluetooth dans la page Appareils.

Affectation des outils et des licences

• Affecter une licence
• Ajouter des outils au coffret
• Échanger un outil

Affecter une licence

Les utilisateurs peuvent affecter une licence à des coffrets dans la page Coffrets.

Ajouter des outils au coffret

Les utilisateurs peuvent ajouter des outils à des coffrets dans la page Outils. Cette méthode s'applique également à l'ajout d'accessoires aux coffrets.

Échanger un outil

Pour échanger un outil, suivez la procédure suivante :

Affecter des accessoires à un coffret

Les utilisateurs peuvent ajouter des accessoires à des coffrets dans la page Accessoires.

Changer le port de l'Open Protocol

Régler les réglages par défaut du coffret

Les nouveaux coffrets sont créés en utilisant un ensemble de réglages par défaut qui peuvent être modifiés.

Pour modifier les paramètres par défaut de chaque nouveau coffret créé, dans l'onglet Coffrets, sélectionnez le menu , puis Réglages par défaut.

Les modifications apportées aux paramètres par défaut n'affecteront que les coffrets créés après l'enregistrement des modifications. Les paramètres existants du coffret ne seront pas affectés.

Pour enregistrer les modifications, effectuez les changements et sélectionnez Enregistrer.

Voici les paramètres par défaut :

OpenTelemetry

La fonction OpenTelemetry vous permet de connecter le portail ToolsControl à Dynatrace afin de collecter des journaux et des données pour surveiller le cluster de votre portail ToolsControl.

Activer OpenTelemetry

Par défaut, OpenTelemetry est désactivé. Pour activer OpenTelemetry :

Pour obtenir de l'aide sur la configuration d'OpenTelemetry, contactez votre représentant Atlas Copco Services.

Répartiteur de charge externe

Les installations de clusters ToolsControl utilisent toujours la répartition de charge interne, qui permet de répartir la charge du processeur. Pour plus d'informations sur la répartition de charge, voir Équilibrage de la charge. Il est également possible d'utiliser un répartiteur de charge externe, qui répartit la charge du réseau.

Conditions préalables

Pour utiliser un répartiteur de charge externe, ToolsControl doit être installé en tant que cluster. Pour plus d'informations sur le processus d'installation de ToolsControl, voir Installation du système.

Lorsque ToolsControl est installé en tant que cluster, trois nœuds sont installés par défaut. Chaque nœud peut être installé dans un sous-réseau distinct. Le répartiteur de charge externe peut être activé et configuré après l'installation et le redémarrage de tous les nœuds.

Mise en service du répartiteur de charge externe

Configurer le répartiteur de charge externe

Lorsque la fonction de répartiteur de charge externe est activée dans le portail ToolsControl, la publication et la propriété de SingleIP doivent être gérées par l'infrastructure réseau et ne peuvent pas être prises en charge par ToolsControl. Il faut utiliser un répartiteur de charge avec traduction d'adresse réseau (NAT) et DSR (Direct Server Return). Ce paragraphe décrit le NAT et le DSR en relation avec ToolsControl.

NAT complet

Certains trafics doivent être répartis en utilisant le NAT complet, également connu sous le nom de SNAT. Dans ce cas, l'adresse IP source est la même que l'adresse IP du répartiteur de charge. Le trafic de retour est masqué, ce qui signifie que les réponses de ToolsControl sont renvoyées via le répartiteur de charge. Utilisez le NAT complet par défaut pour tout le trafic TCP, y compris HTTP, HTTPS et Open Protocol, à l'exception du trafic provenant des appareils Atlas Copco. Pour obtenir la liste des appareils Atlas Copco, reportez-vous à la section Retour direct au serveur, plus loin dans cette page.

Retour direct au serveur

Certains trafics doivent être répartis en utilisant le DSR, également connu sous le nom de routage asymétrique ou routage nPath. L'adresse IP source du client est conservée. Le trafic de retour de ToolsControl va directement au client. DSR doit être utilisé pour tout le trafic en provenance et à destination des outils à couple. Selon l'appareil utilisé, le DSR doit être configuré pour les ports suivants dans ces outils :

• Outils antérieurs Atlas Copco, par exemple, STB, SRB, TBP, STwrench et MWR. Ces outils utilisent le port UDP 6677.

• Outils IxB Atlas Copco, par exemple ITB et ICB. Ces outils utilisent les ports TCP 62000–62020.

• Outils filaires Atlas Copco avec PFS. Ces outils envoient des données via le port TCP 61201 et reçoivent des données via le port TCP 61401.

• Accessoires Atlas Copco, par exemple, Selector 6, I/O Hub et CAN converter. Ces accessoires utilisent le port TCP 25000.

Contrôles de santé

Des contrôles de santé distincts doivent être créés pour les deux répartiteurs : un pour NAT et un pour DSR. Les deux contrôles de santé doivent vérifier périodiquement l'état de tous les nœuds (serveurs back-end) du cluster. Le trafic réseau ne doit être routé que vers des nœuds sains.

Contrôle de santé pour le NAT

Pour détecter la disponibilité des serveurs back-end pour le trafic TCP qui n'est pas DSR, veillez à ce que le répartiteur de charge puisse effectuer des contrôles de santé sur la base des informations suivantes :

Contrôle de santé pour le DSR

Pour détecter la disponibilité des serveurs back-end pour le trafic d'appareils Atlas Copco, veillez à ce que le répartiteur de charge puisse effectuer des contrôles de santé sur la base des informations suivantes. Un seul contrôle de santé est nécessaire, quels que soient les ports et les types d'appareils utilisés :

Fonctionnement

• Utiliser ToolsControl
• Voir l'état du ToolsControl
• Mise à niveau de ToolsControl
• Volets
• ToolsControl Console

Utiliser ToolsControl

ToolsControl, en utilisation autonome ou en cluster, ne nécessite aucune intervention manuelle car il s'agit d'un système entièrement automatisé. ToolsControl envoie des notifications lorsque l'opération rencontre des évènements, en fonction du paramètre Évènement de la page Réglages.

Voir l'état du ToolsControl

Les informations sur l'état de ToolsControl comprennent les fonctions suivantes : Tableau de bord, Coffrets, Logiciels, Outils, Accessoires, Licences, Données et Réglages. Accédez à chaque fonction via le portail ToolsControl pour voir les informations détaillées sur l'état de chaque fonction.

Mise à niveau de ToolsControl

La mise à niveau de ToolsControl permet de mettre en œuvre les dernières fonctionnalités et améliorations. La mise à niveau de ToolsControl est effectuée pour les serveurs à nœud unique ou en cluster via le portail ToolsControl.

Les processus de mise à niveau pour les configurations autonomes et en cluster sont les mêmes.

Répétez le processus de mise à niveau à partir du même nœud si la mise à niveau échoue. La répétition du processus de mise à niveau n'aura pas d'impact sur les nœuds qui contiennent déjà la version du logiciel cible.

Organisez le processus de mise à niveau dans un cadre hors production afin d'éviter tout impact pendant la courte période d'interruption des outils.

Volets

Les volets vous permettent de créer des vues qui contiennent chacune un certain nombre de postes de travail virtuels. Chaque poste de travail virtuel d'un volet affiche des données en temps réel. Les principales unités affichées sont :

Pour afficher tous les volets, sélectionnez le menu Volets.

Créer un volet

Pour créer un volet :

Ouvrir un volet

Pour ouvrir un volet, sélectionnez Ouvrir.

Modifier un volet

Pour modifier un volet, sélectionnez Modifier pour le volet que vous souhaitez modifier ou terminez la création d'un volet. Dans cette vue, vous pouvez effectuer les tâches suivantes :

• Modifier le nom d'un volet : sélectionnez Modifier le nom.

• Supprimer un volet : sélectionnez Supprimer.

• Ajouter un volet : sélectionnez Ajouter volet.

• Ouvrir un volet : sélectionnez .

Ajouter un volet

Supprimer un volet

Sur un volet que vous souhaitez supprimer, sélectionnez Supprimer et confirmez la suppression du volet.

ToolsControl Console

ToolsControl Console permet aux utilisatuers de se connecter à ToolsControl sans accès à ToolsControl Portal. ToolsControl Console peut être utilisée pour effectuer un petit nombre de tâches qui sont détaillées plus loin dans cette page. Si ToolsControl Portal n'est pas disponible, connectez-vous à ToolsControl Console sur la machine en métal ou la machine virtuelle sur laquelle ToolsControl est installé.

Actions au clavier

Utilisez les touches de clavier suivantes dans ToolsControl Console:

Menus

Ces menus et options sont disponibles dans ToolsControl Console :

Informations

Cette vue affiche une description des options disponibles dans ToolsControl Console. L’adresse web vers ToolsControl Portal s’affiche.

Administration

Si une clé de sécurité a été saisie lors de l'installation de ToolsControl, l'utilisateur doit saisir la clé de sécurité pour accéder à la section Administration. Il est possible de saisir une clé de sécurité différente par nœud. Il n'est pas possible de saisir ou de modifier une clé de sécurité dans ToolsControl Portal.

Si ToolsControl est mis à niveau à partir d'une version antérieure à la 1.6, les clés de sécurité ne sont pas utilisées. Dans ce cas, allez dans Administration pour saisir une clé de sécurité qui sera désormais utilisée pour accéder à la section Administration.

Supprimer un nœud

Cette option permet de supprimer des nœuds de cluster. Un nœud doit être désactivé pour être supprimé.

Tout nœud peut être supprimé, à l'exception du nœud par lequel l'utilisateur est connecté à ToolsControl Console. Pour supprimer un nœud, connectez-vous à ToolsControl Console sur un autre nœud et supprimez le nœud demandé.

Lorsqu'un nœud est supprimé, il l'est définitivement. La suppression d'un nœud est irréversible.

Activer ou désactiver le compte d'entretien

Le compte d'entretien peut être utilisé par les employés d'Atlas Copco pour effectuer des travaux d'entretien. Par défaut, le compte d'entretien est désactivé.

Si l'option indique Activer le compte d'entretien, le compte d'entretien est actuellement désactivé. Sélectionnez Activer le compte d'entretien et confirmez l'action pour activer le compte d'entretien.

Si l'option indique Désactiver le compte d'entretien, le compte d'entretien est actuellement activé. Sélectionnez Désactiver le compte d'entretien et confirmez l'action pour activer le compte d'entretien.

Rapports et Statistiques

• Rapports et statistiques de ToolsControl

Rapports et statistiques de ToolsControl

Le rapport et les statistiques de ToolsControl sont affichés dans la vue Données. Le portail ToolsControl dispose d'une fonction de recherche pour prendre en charge la présentation des informations sur l'état du cluster.

Avant la recherche, l'utilisateur peut limiter le résultat avec cinq restrictions : Utiliser l'heure locale, Activer l'historique des requêtes, Activer l'autocomplétion, Activer la mise en évidence, et Activer le linter. Par défaut, les trois derniers sont cochés.

L'utilisateur peut soit saisir le mot clé dans le champ de recherche, soit le choisir dans une liste. La liste est automatiquement activée en sélectionnant l'icône en forme de terre à côté du champ de recherche. Sélectionnez Exécuter pour de démarrer la recherche. Le résultat peut être présenté sous la forme d'un tableau ou d'un graphique.

Pour afficher plusieurs résultats de recherche en même temps, l'utilisateur peut utiliser la fonction Ajouter panneau. L'utilisateur peut également supprimer un panneau en sélectionnant Supprimer panneau.

Dépannage et entretien

• Le coffret ne démarre pas
• L'interface utilisateur du coffret redémarre constamment après une mise à niveau
• Problèmes de licence
• Impossible d’accéder au portail ToolsControl

Le coffret ne démarre pas

Description du problème : Si un coffret ne démarre pas ou s'affiche avec une couleur rouge dans la vue Tableau de bord de ToolsControl Portal, essayez de téléverser à nouveau le logiciel du coffret pour résoudre le problème.

Résolution : Téléversez à nouveau le logiciel du coffret :

L'interface utilisateur du coffret redémarre constamment après une mise à niveau

Description du problème : Dans ToolsControl Portal, allez dans Coffrets et sélectionnez un coffret pour voir son interface utilisateur. Si l'interface utilisateur redémarre sans interaction de la part de l'utilisateur, il se peut que vous deviez restaurer le dernier instantané créé automatiquement.

Lorsque le problème survient, l'interface utilisateur semble démarrer normalement : une barre de progression apparaît, puis l'écran clignote et le coffret redémarre.

Résolution : restaurez le dernier instantané créé automatiquement pour le coffret :

Le dernier instantané créé est restauré et le problème devrait être résolu.

Problèmes de licence

Description du problème

La résolution du problème peut s'appliquer si vous rencontrez un ou plusieurs des problèmes suivants :

Les licences sont affectées mais ne sont pas visibles

1. Dans le menu Coffrets, sélectionnez un coffret.

2. Dans l'interface utilisateur du coffret, sélectionnez Affectation des licences.

3. Sélectionnez Types de postes de travail virtuels.

   La liste des licences dans État actuel de la licence est vide, même si vous sélectionnez SYNC.

Un message d'avertissement apparaît lors de la tentative de synchronisation

1. Dans le menu Coffrets, sélectionnez un coffret.

2. Dans l'interface utilisateur du coffret, sélectionnez Affectation des licences.

3. Sélectionnez Types de postes de travail virtuels.

4. Sélectionnez SYNC.

   Un message d'avertissement s'affiche, par exemple « Échec de la connexion au gestionnaire de licences d'Atlas Copco ».

Les sources de licence n'apparaissent pas dans l'aperçu des sources

1. Dans le menu Coffrets, sélectionnez un coffret.

2. Dans l'interface utilisateur du coffret, sélectionnez Affectation des licences.

3. Sélectionnez Aperçu de la source.

   La liste Sources des licences est vide.

Résolution

Les données de licence dans le coffret ont peut-être été corrompues. La solution consiste à réinitialiser les données de licence pour le coffret :

La réinitialisation des données de licence du coffret :

• N’affectera pas les mappages des licences existantes.

• Arrêtera et redémarrera automatiquement le coffret.

1. Dans le menu Coffrets, sélectionnez le coffret pour lequel vous souhaitez réinitialiser les données de licence.

2. Sélectionnez le menu .

3. Sélectionnez Réinitialiser les données de licence.

   La vue Réinitialiser les données de licence s’affiche.

4. Sélectionnez Confirmer.

Le coffret est redémarré et ses données de licence sont réinitialisées.

Impossible d’accéder au portail ToolsControl

Description du problème : L'interface web du portail ToolsControl est inaccessible.

Résolution : L'une des causes possibles est que l'option Rediriger HTTP vers HTTPS est activée et que le certificat HTTPS est défectueux ou mal créé. Pour résoudre ce problème, contactez votre représentant local Atlas Copco.

Pour plus d'informations sur Rediriger HTTP vers HTTPS, consultez Affichage des certificats.

Référence

• Documents de référence
• List of Third-Party Licenses

Documents de référence

Documents Atlas Copco

List of Third-Party Licenses

Licenses:

Academic Free License v2.1

(D-Bus 1.12.18)

Academic Free License

=====================

v. 2.1

------

This Academic Free License (the "License") applies to any original work of

authorship (the "Original Work") whose owner (the "Licensor") has placed the

following notice immediately following the copyright notice for the Original

Work:

Licensed under the Academic Free License version 2.1

1) Grant of Copyright License. Licensor hereby grants You a world-wide,

royalty-free, non-exclusive, perpetual, sublicenseable license to do the

following:

* to reproduce the Original Work in copies;

* to prepare derivative works ("Derivative Works") based upon the Original

Work;

* to distribute copies of the Original Work and Derivative Works to the

public;

* to perform the Original Work publicly; and

* to display the Original Work publicly.

2) Grant of Patent License. Licensor hereby grants You a world-wide,

royalty-free, non-exclusive, perpetual, sublicenseable license, under patent

claims owned or controlled by the Licensor that are embodied in the Original Work

as furnished by the Licensor, to make, use, sell and offer for sale the Original

Work and Derivative Works.

3) Grant of Source Code License. The term "Source Code" means the preferred form

of the Original Work for making modifications to it and all available

documentation describing how to modify the Original Work. Licensor hereby agrees

to provide a machine-readable copy of the Source Code of the Original Work along

with each copy of the Original Work that Licensor distributes. Licensor reserves

the right to satisfy this obligation by placing a machine-readable copy of the

Source Code in an information repository reasonably calculated to permit

inexpensive and convenient access by You for as long as Licensor continues to

distribute the Original Work, and by publishing the address of that information

repository in a notice immediately following the copyright notice that applies to

the Original Work.

4) Exclusions From License Grant. Neither the names of Licensor, nor the names of

any contributors to the Original Work, nor any of their trademarks or service

marks, may be used to endorse or promote products derived from this Original Work

without express prior written permission of the Licensor. Nothing in this License

shall be deemed to grant any rights to trademarks, copyrights, patents, trade

secrets or any other intellectual property of Licensor except as expressly stated

herein. No patent license is granted to make, use, sell or offer to sell

embodiments of any patent claims other than the licensed claims defined in

Section 2. No right is granted to the trademarks of Licensor even if such marks

are included in the Original Work. Nothing in this License shall be interpreted

to prohibit Licensor from licensing under different terms from this License any

Original Work that Licensor otherwise would have a right to license.

5) This section intentionally omitted.

6) Attribution Rights. You must retain, in the Source Code of any Derivative

Works that You create, all copyright, patent or trademark notices from the Source

Code of the Original Work, as well as any notices of licensing and any

descriptive text identified therein as an "Attribution Notice." You must cause

the Source Code for any Derivative Works that You create to carry a prominent

Attribution Notice reasonably calculated to inform recipients that You have

modified the Original Work.

7) Warranty of Provenance and Disclaimer of Warranty. Licensor warrants that the

copyright in and to the Original Work and the patent rights granted herein by

Licensor are owned by the Licensor or are sublicensed to You under the terms of

this License with the permission of the contributor(s) of those copyrights and

patent rights. Except as expressly stated in the immediately proceeding sentence,

the Original Work is provided under this License on an "AS IS" BASIS and WITHOUT

WARRANTY, either express or implied, including, without limitation, the

warranties of NON-INFRINGEMENT, MERCHANTABILITY or FITNESS FOR A PARTICULAR

PURPOSE. THE ENTIRE RISK AS TO THE QUALITY OF THE ORIGINAL WORK IS WITH YOU. This

DISCLAIMER OF WARRANTY constitutes an essential part of this License. No license

to Original Work is granted hereunder except under this disclaimer.

8) Limitation of Liability. Under no circumstances and under no legal theory,

whether in tort (including negligence), contract, or otherwise, shall the

Licensor be liable to any person for any direct, indirect, special, incidental,

or consequential damages of any character arising as a result of this License or

the use of the Original Work including, without limitation, damages for loss of

goodwill, work stoppage, computer failure or malfunction, or any and all other

commercial damages or losses. This limitation of liability shall not apply to

liability for death or personal injury resulting from Licensor's negligence to

the extent applicable law prohibits such limitation. Some jurisdictions do not

allow the exclusion or limitation of incidental or consequential damages, so this

exclusion and limitation may not apply to You.

9) Acceptance and Termination. If You distribute copies of the Original Work or a

Derivative Work, You must make a reasonable effort under the circumstances to

obtain the express assent of recipients to the terms of this License. Nothing

else but this License (or another written agreement between Licensor and You)

grants You permission to create Derivative Works based upon the Original Work or

to exercise any of the rights granted in Section 1 herein, and any attempt to do

so except under the terms of this License (or another written agreement between

Licensor and You) is expressly prohibited by U.S. copyright law, the equivalent

laws of other countries, and by international treaty. Therefore, by exercising

any of the rights granted to You in Section 1 herein, You indicate Your

acceptance of this License and all of its terms and conditions.

10) Termination for Patent Action. This License shall terminate automatically and

You may no longer exercise any of the rights granted to You by this License as of

the date You commence an action, including a cross-claim or counterclaim, against

Licensor or any licensee alleging that the Original Work infringes a patent. This

termination provision shall not apply for an action alleging patent infringement

by combinations of the Original Work with other software or hardware.

11) Jurisdiction, Venue and Governing Law. Any action or suit relating to this

License may be brought only in the courts of a jurisdiction wherein the Licensor

resides or in which Licensor conducts its primary business, and under the laws of

that jurisdiction excluding its conflict-of-law provisions. The application of

the United Nations Convention on Contracts for the International Sale of Goods is

expressly excluded. Any use of the Original Work outside the scope of this

License or after its termination shall be subject to the requirements and

penalties of the U.S. Copyright Act, 17 U.S.C. ยง 101 et seq., the equivalent laws

of other countries, and international treaty. This section shall survive the

termination of this License.

12) Attorneys Fees. In any action to enforce the terms of this License or seeking

damages relating thereto, the prevailing party shall be entitled to recover its

costs and expenses, including, without limitation, reasonable attorneys' fees and

costs incurred in connection with such action, including any appeal of such

action. This section shall survive the termination of this License.

13) Miscellaneous. This License represents the complete agreement concerning the

subject matter hereof. If any provision of this License is held to be

unenforceable, such provision shall be reformed only to the extent necessary to

make it enforceable.

14) Definition of "You" in This License. "You" throughout this License, whether

in upper or lower case, means an individual or a legal entity exercising rights

under, and complying with all of the terms of, this License. For legal entities,

"You" includes any entity that controls, is controlled by, or is under common

control with you. For purposes of this definition, "control" means (i) the power,

direct or indirect, to cause the direction or management of such entity, whether

by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the

outstanding shares, or (iii) beneficial ownership of such entity.

15) Right to Use. You may use the Original Work in all ways not otherwise

restricted or conditioned by this License or by law, and Licensor promises not to

interfere with or be responsible for such uses by You.

---

Apache License 2.0

(Apache XML Commons 1.3.04, cloudfoundry/cflinuxfs4-compat-release 1.80.0, OpenSSL 3.1.4, OpenSSL 3.1.5, prometheus/prometheus v2.49.1, psf-requests 2.28.1, StAX 1.0)

Apache License

Version 2.0, January 2004

=========================

http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

"License" shall mean the terms and conditions for use, reproduction, and

distribution as defined by Sections 1 through 9 of this document.

"Licensor" shall mean the copyright owner or entity authorized by the copyright

owner that is granting the License.

"Legal Entity" shall mean the union of the acting entity and all other entities

that control, are controlled by, or are under common control with that entity.

For the purposes of this definition, "control" means (i) the power, direct or

indirect, to cause the direction or management of such entity, whether by

contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the

outstanding shares, or (iii) beneficial ownership of such entity.

"You" (or "Your") shall mean an individual or Legal Entity exercising permissions

granted by this License.

"Source" form shall mean the preferred form for making modifications, including

but not limited to software source code, documentation source, and configuration

files.

"Object" form shall mean any form resulting from mechanical transformation or

translation of a Source form, including but not limited to compiled object code,

generated documentation, and conversions to other media types.

"Work" shall mean the work of authorship, whether in Source or Object form, made

available under the License, as indicated by a copyright notice that is included

in or attached to the work (an example is provided in the Appendix below).

"Derivative Works" shall mean any work, whether in Source or Object form, that is

based on (or derived from) the Work and for which the editorial revisions,

annotations, elaborations, or other modifications represent, as a whole, an

original work of authorship. For the purposes of this License, Derivative Works

shall not include works that remain separable from, or merely link (or bind by

name) to the interfaces of, the Work and Derivative Works thereof.

"Contribution" shall mean any work of authorship, including the original version

of the Work and any modifications or additions to that Work or Derivative Works

thereof, that is intentionally submitted to Licensor for inclusion in the Work by

the copyright owner or by an individual or Legal Entity authorized to submit on

behalf of the copyright owner. For the purposes of this definition, "submitted"

means any form of electronic, verbal, or written communication sent to the

Licensor or its representatives, including but not limited to communication on

electronic mailing lists, source code control systems, and issue tracking systems

that are managed by, or on behalf of, the Licensor for the purpose of discussing

and improving the Work, but excluding communication that is conspicuously marked

or otherwise designated in writing by the copyright owner as "Not a

Contribution."

"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of

whom a Contribution has been received by Licensor and subsequently incorporated

within the Work.

2. Grant of Copyright License. Subject to the terms and conditions of this

License, each Contributor hereby grants to You a perpetual, worldwide,

non-exclusive, no-charge, royalty-free, irrevocable copyright license to

reproduce, prepare Derivative Works of, publicly display, publicly perform,

sublicense, and distribute the Work and such Derivative Works in Source or Object

form.

3. Grant of Patent License. Subject to the terms and conditions of this License,

each Contributor hereby grants to You a perpetual, worldwide, non-exclusive,

no-charge, royalty-free, irrevocable (except as stated in this section) patent

license to make, have made, use, offer to sell, sell, import, and otherwise

transfer the Work, where such license applies only to those patent claims

licensable by such Contributor that are necessarily infringed by their

Contribution(s) alone or by combination of their Contribution(s) with the Work to

which such Contribution(s) was submitted. If You institute patent litigation

against any entity (including a cross-claim or counterclaim in a lawsuit)

alleging that the Work or a Contribution incorporated within the Work constitutes

direct or contributory patent infringement, then any patent licenses granted to

You under this License for that Work shall terminate as of the date such

litigation is filed.

4. Redistribution. You may reproduce and distribute copies of the Work or

Derivative Works thereof in any medium, with or without modifications, and in

Source or Object form, provided that You meet the following conditions:

a. You must give any other recipients of the Work or Derivative Works a copy of

this License; and

b. You must cause any modified files to carry prominent notices stating that

You changed the files; and

c. You must retain, in the Source form of any Derivative Works that You

distribute, all copyright, patent, trademark, and attribution notices from

the Source form of the Work, excluding those notices that do not pertain to

any part of the Derivative Works; and

d. If the Work includes a "NOTICE" text file as part of its distribution, then

any Derivative Works that You distribute must include a readable copy of the

attribution notices contained within such NOTICE file, excluding those

notices that do not pertain to any part of the Derivative Works, in at least

one of the following places: within a NOTICE text file distributed as part of

the Derivative Works; within the Source form or documentation, if provided

along with the Derivative Works; or, within a display generated by the

Derivative Works, if and wherever such third-party notices normally appear.

The contents of the NOTICE file are for informational purposes only and do

not modify the License. You may add Your own attribution notices within

Derivative Works that You distribute, alongside or as an addendum to the

NOTICE text from the Work, provided that such additional attribution notices

cannot be construed as modifying the License.

You may add Your own copyright statement to Your modifications and may provide

additional or different license terms and conditions for use, reproduction, or

distribution of Your modifications, or for any such Derivative Works as a whole,

provided Your use, reproduction, and distribution of the Work otherwise complies

with the conditions stated in this License.

5. Submission of Contributions. Unless You explicitly state otherwise, any

Contribution intentionally submitted for inclusion in the Work by You to the

Licensor shall be under the terms and conditions of this License, without any

additional terms or conditions. Notwithstanding the above, nothing herein shall

supersede or modify the terms of any separate license agreement you may have

executed with Licensor regarding such Contributions.

6. Trademarks. This License does not grant permission to use the trade names,

trademarks, service marks, or product names of the Licensor, except as required

for reasonable and customary use in describing the origin of the Work and

reproducing the content of the NOTICE file.

7. Disclaimer of Warranty. Unless required by applicable law or agreed to in

writing, Licensor provides the Work (and each Contributor provides its

Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,

either express or implied, including, without limitation, any warranties or

conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A

PARTICULAR PURPOSE. You are solely responsible for determining the

appropriateness of using or redistributing the Work and assume any risks

associated with Your exercise of permissions under this License.

8. Limitation of Liability. In no event and under no legal theory, whether in

tort (including negligence), contract, or otherwise, unless required by

applicable law (such as deliberate and grossly negligent acts) or agreed to in

writing, shall any Contributor be liable to You for damages, including any

direct, indirect, special, incidental, or consequential damages of any character

arising as a result of this License or out of the use or inability to use the

Work (including but not limited to damages for loss of goodwill, work stoppage,

computer failure or malfunction, or any and all other commercial damages or

losses), even if such Contributor has been advised of the possibility of such

damages.

9. Accepting Warranty or Additional Liability. While redistributing the Work or

Derivative Works thereof, You may choose to offer, and charge a fee for,

acceptance of support, warranty, indemnity, or other liability obligations and/or

rights consistent with this License. However, in accepting such obligations, You

may act only on Your own behalf and on Your sole responsibility, not on behalf of

any other Contributor, and only if You agree to indemnify, defend, and hold each

Contributor harmless for any liability incurred by, or claims asserted against,

such Contributor by reason of your accepting any such warranty or additional

liability.

END OF TERMS AND CONDITIONS

APPENDIX: How to apply the Apache License to your work

To apply the Apache License to your work, attach the following boilerplate

notice, with the fields enclosed by brackets "[]" replaced with your own

identifying information. (Don't include the brackets!) The text should be

enclosed in the appropriate comment syntax for the file format. We also recommend

that a file or class name and description of purpose be included on the same

"printed page" as the copyright notice for easier identification within

third-party archives.

Copyright [yyyy] [name of copyright owner] Licensed under the Apache License,

Version 2.0 (the "License"); you may not use this file except in compliance

with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law

or agreed to in writing, software distributed under the License is

distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY

KIND, either express or implied. See the License for the specific language

governing permissions and limitations under the License.

---

Artistic License 1.0

(autodie 2.34, ExtUtils::ParseXS 3.35, IO::Compress 2.102, libpod-simple-perl 3.42, libtest-simple-perl 1.302183, Perl 5.34.0, perl-DBM_Filter 0.06, perl-ExtUtils-Constant 0.25, perl-gettext 1.07, perl-IPC-SysV 2.09, Test::Harness 3.43)

The Artistic License

====================

Preamble

The intent of this document is to state the conditions under which a Package may

be copied, such that the Copyright Holder maintains some semblance of artistic

control over the development of the package, while giving the users of the

package the right to use and distribute the Package in a more-or-less customary

fashion, plus the right to make reasonable modifications.

Definitions:

* "Package" refers to the collection of files distributed by the Copyright

Holder, and derivatives of that collection of files created through textual

modification.

* "Standard Version" refers to such a Package if it has not been modified, or

has been modified in accordance with the wishes of the Copyright Holder.

* "Copyright Holder" is whoever is named in the copyright or copyrights for the

package.

* "You" is you, if you're thinking about copying or distributing this Package.

* "Reasonable copying fee" is whatever you can justify on the basis of media

cost, duplication charges, time of people involved, and so on. (You will not

be required to justify it to the Copyright Holder, but only to the computing

community at large as a market that must bear the fee.)

* "Freely Available" means that no fee is charged for the item itself, though

there may be fees involved in handling the item. It also means that

recipients of the item may redistribute it under the same conditions they

received it.

1. You may make and give away verbatim copies of the source form of the Standard

Version of this Package without restriction, provided that you duplicate all of

the original copyright notices and associated disclaimers.

2. You may apply bug fixes, portability fixes and other modifications derived

from the Public Domain or from the Copyright Holder. A Package modified in such a

way shall still be considered the Standard Version.

3. You may otherwise modify your copy of this Package in any way, provided that

you insert a prominent notice in each changed file stating how and when you

changed that file, and provided that you do at least ONE of the following:

a) place your modifications in the Public Domain or otherwise make them

Freely Available, such as by posting said modifications to Usenet or an

equivalent medium, or placing the modifications on a major archive site

such as ftp.uu.net, or by allowing the Copyright Holder to include your

modifications in the Standard Version of the Package.

b) use the modified Package only within your corporation or organization.

c) rename any non-standard executables so the names do not conflict with

standard executables, which must also be provided, and provide a separate

manual page for each non-standard executable that clearly documents how it

differs from the Standard Version.

d) make other distribution arrangements with the Copyright Holder.

4. You may distribute the programs of this Package in object code or executable

form, provided that you do at least ONE of the following:

a) distribute a Standard Version of the executables and library files,

together with instructions (in the manual page or equivalent) on where to

get the Standard Version.

b) accompany the distribution with the machine-readable source of the

Package with your modifications.

c) accompany any non-standard executables with their corresponding Standard

Version executables, giving the non-standard executables non-standard

names, and clearly documenting the differences in manual pages (or

equivalent), together with instructions on where to get the Standard

Version.

d) make other distribution arrangements with the Copyright Holder.

5. You may charge a reasonable copying fee for any distribution of this Package.

You may charge any fee you choose for support of this Package. You may not charge

a fee for this Package itself. However, you may distribute this Package in

aggregate with other (possibly commercial) programs as part of a larger (possibly

commercial) software distribution provided that you do not advertise this Package

as a product of your own.

6. The scripts and library files supplied as input to or produced as output from

the programs of this Package do not automatically fall under the copyright of

this Package, but belong to whomever generated them, and may be sold

commercially, and may be aggregated with this Package.

7. C or perl subroutines supplied by you and linked into this Package shall not

be considered part of this Package.

8. The name of the Copyright Holder may not be used to endorse or promote

products derived from this software without specific prior written permission.

9. THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

The End

---

Artistic License 1.0 (Perl)

(Archive-Tar 2.38, base-files 11.1ubuntu1, IO 1.45)

The "Artistic License"

======================

Preamble

The intent of this document is to state the conditions under which a Package may

be copied, such that the Copyright Holder maintains some semblance of artistic

control over the development of the package, while giving the users of the

package the right to use and distribute the Package in a more-or-less customary

fashion, plus the right to make reasonable modifications.

Definitions:

* "Package" refers to the collection of files distributed by the Copyright

Holder, and derivatives of that collection of files created through textual

modification.

* "Standard Version" refers to such a Package if it has not been modified, or

has been modified in accordance with the wishes of the Copyright Holder as

specified below.

* "Copyright Holder" is whoever is named in the copyright or copyrights for

the package.

* "You" is you, if you're thinking about copying or distributing this Package.

* "Reasonable copying fee" is whatever you can justify on the basis of media

cost, duplication charges, time of people involved, and so on. (You will not

be required to justify it to the Copyright Holder, but only to the computing

community at large as a market that must bear the fee.)

* "Freely Available" means that no fee is charged for the item itself, though

there may be fees involved in handling the item. It also means that

recipients of the item may redistribute it under the same conditions they

received it.

1. You may make and give away verbatim copies of the source form of the

Standard Version of this Package without restriction, provided that you

duplicate all of the original copyright notices and associated disclaimers.

2. You may apply bug fixes, portability fixes and other modifications derived

from the Public Domain or from the Copyright Holder. A Package modified in

such a way shall still be considered the Standard Version.

3. You may otherwise modify your copy of this Package in any way, provided that

you insert a prominent notice in each changed file stating how and when you

changed that file, and provided that you do at least ONE of the following:

a. place your modifications in the Public Domain or otherwise make them

Freely Available, such as by posting said modifications to Usenet or an

equivalent medium, or placing the modifications on a major archive site

such as uunet.uu.net, or by allowing the Copyright Holder to include your

modifications in the Standard Version of the Package.

b. use the modified Package only within your corporation or organization.

c. rename any non-standard executables so the names do not conflict with

standard executables, which must also be provided, and provide a separate

manual page for each non-standard executable that clearly documents how

it differs from the Standard Version.

d. make other distribution arrangements with the Copyright Holder.

4. You may distribute the programs of this Package in object code or executable

form, provided that you do at least ONE of the following:

a. distribute a Standard Version of the executables and library files,

together with instructions (in the manual page or equivalent) on where to

get the Standard Version.

b. accompany the distribution with the machine-readable source of the

Package with your modifications.

c. give non-standard executables non-standard names, and clearly document

the differences in manual pages (or equivalent), together with

instructions on where to get the Standard Version.

d. make other distribution arrangements with the Copyright Holder.

5. You may charge a reasonable copying fee for any distribution of this

Package. You may charge any fee you choose for support of this Package. You

may not charge a fee for this Package itself. However, you may distribute

this Package in aggregate with other (possibly commercial) programs as part

of a larger (possibly commercial) software distribution provided that you do

not advertise this Package as a product of your own. You may embed this

Package's interpreter within an executable of yours (by linking); this shall

be construed as a mere form of aggregation, provided that the complete

Standard Version of the interpreter is so embedded.

6. The scripts and library files supplied as input to or produced as output

from the programs of this Package do not automatically fall under the

copyright of this Package, but belong to whoever generated them, and may be

sold commercially, and may be aggregated with this Package. If such scripts

or library files are aggregated with this Package via the so-called "undump"

or "unexec" methods of producing a binary executable image, then distribution

of such an image shall neither be construed as a distribution of this Package

nor shall it fall under the restrictions of Paragraphs 3 and 4, provided that

you do not represent such an executable image as a Standard Version of this

Package.

7. C subroutines (or comparably compiled subroutines in other languages)

supplied by you and linked into this Package in order to emulate subroutines

and variables of the language defined by this Package shall not be considered

part of this Package, but are the equivalent of input as in Paragraph 6,

provided these subroutines do not change the language in any way that would

cause it to fail the regression tests for the language.

8. Aggregation of this Package with a commercial distribution is always

permitted provided that the use of this Package is embedded; that is, when no

overt attempt is made to make this Package's interfaces visible to the end

user of the commercial distribution. Such use shall not be construed as a

distribution of this Package.

9. The name of the Copyright Holder may not be used to endorse or promote

products derived from this software without specific prior written

permission.

10. THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF

MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.

The End

---

Artistic License 2.0

(iptables-backend-nft 1.8.7)

Artistic License 2.0

====================

Copyright (c) 2000-2006, The Perl Foundation.

Everyone is permitted to copy and distribute verbatim copies of this license

document, but changing it is not allowed.

Preamble

This license establishes the terms under which a given free software Package may

be copied, modified, distributed, and/or redistributed. The intent is that the

Copyright Holder maintains some artistic control over the development of that

Package while still keeping the Package available as open source and free

software.

You are always permitted to make arrangements wholly outside of this license

directly with the Copyright Holder of a given Package. If the terms of this

license do not permit the full use that you propose to make of the Package, you

should contact the Copyright Holder and seek a different licensing arrangement.

Definitions

"Copyright Holder" means the individual(s) or organization(s) named in the

copyright notice for the entire Package.

"Contributor" means any party that has contributed code or other material to the

Package, in accordance with the Copyright Holder's procedures.

"You" and "your" means any person who would like to copy, distribute, or modify

the Package.

"Package" means the collection of files distributed by the Copyright Holder, and

derivatives of that collection and/or of those files. A given Package may consist

of either the Standard Version, or a Modified Version.

"Distribute" means providing a copy of the Package or making it accessible to

anyone else, or in the case of a company or organization, to others outside of

your company or organization.

"Distributor Fee" means any fee that you charge for Distributing this Package or

providing support for this Package to another party. It does not mean licensing

fees.

"Standard Version" refers to the Package if it has not been modified, or has been

modified only in ways explicitly requested by the Copyright Holder.

"Modified Version" means the Package, if it has been changed, and such changes

were not explicitly requested by the Copyright Holder.

"Original License" means this Artistic License as Distributed with the Standard

Version of the Package, in its current version or as it may be modified by The

Perl Foundation in the future.

"Source" form means the source code, documentation source, and configuration

files for the Package.

"Compiled" form means the compiled bytecode, object code, binary, or any other

form resulting from mechanical transformation or translation of the Source form.

Permission for Use and Modification Without Distribution

(1) You are permitted to use the Standard Version and create and use Modified

Versions for any purpose without restriction, provided that you do not Distribute

the Modified Version.

Permissions for Redistribution of the Standard Version

(2) You may Distribute verbatim copies of the Source form of the Standard Version

of this Package in any medium without restriction, either gratis or for a

Distributor Fee, provided that you duplicate all of the original copyright

notices and associated disclaimers. At your discretion, such verbatim copies may

or may not include a Compiled form of the Package.

(3) You may apply any bug fixes, portability changes, and other modifications

made available from the Copyright Holder. The resulting Package will still be

considered the Standard Version, and as such will be subject to the Original

License.

Distribution of Modified Versions of the Package as Source

(4) You may Distribute your Modified Version as Source (either gratis or for a

Distributor Fee, and with or without a Compiled form of the Modified Version)

provided that you clearly document how it differs from the Standard Version,

including, but not limited to, documenting any non-standard features,

executables, or modules, and provided that you do at least ONE of the following:

(a) make the Modified Version available to the Copyright Holder of the Standard

Version, under the Original License, so that the Copyright Holder may include

your modifications in the Standard Version.

(b) ensure that installation of your Modified Version does not prevent the user

installing or running the Standard Version. In addition, the Modified Version

must bear a name that is different from the name of the Standard Version.

(c) allow anyone who receives a copy of the Modified Version to make the Source

form of the Modified Version available to others under

(i) the Original License or

(ii) a license that permits the licensee to freely copy, modify and redistribute

the Modified Version using the same licensing terms that apply to the copy that

the licensee received, and requires that the Source form of the Modified Version,

and of any works derived from it, be made freely available in that license fees

are prohibited but Distributor Fees are allowed.

Distribution of Compiled Forms of the Standard Version or Modified Versions

without the Source

(5) You may Distribute Compiled forms of the Standard Version without the Source,

provided that you include complete instructions on how to get the Source of the

Standard Version. Such instructions must be valid at the time of your

distribution. If these instructions, at any time while you are carrying out such

distribution, become invalid, you must provide new instructions on demand or

cease further distribution. If you provide valid instructions or cease

distribution within thirty days after you become aware that the instructions are

invalid, then you do not forfeit any of your rights under this license.

(6) You may Distribute a Modified Version in Compiled form without the Source,

provided that you comply with Section 4 with respect to the Source of the

Modified Version.

Aggregating or Linking the Package

(7) You may aggregate the Package (either the Standard Version or Modified

Version) with other packages and Distribute the resulting aggregation provided

that you do not charge a licensing fee for the Package. Distributor Fees are

permitted, and licensing fees for other components in the aggregation are

permitted. The terms of this license apply to the use and Distribution of the

Standard or Modified Versions as included in the aggregation.

(8) You are permitted to link Modified and Standard Versions with other works, to

embed the Package in a larger work of your own, or to build stand-alone binary or

bytecode versions of applications that include the Package, and Distribute the

result without restriction, provided the result does not expose a direct

interface to the Package.

Items That are Not Considered Part of a Modified Version

(9) Works (including, but not limited to, modules and scripts) that merely extend

or make use of the Package, do not, by themselves, cause the Package to be a

Modified Version. In addition, such works are not considered parts of the Package

itself, and are not subject to the terms of this license.

General Provisions

(10) Any use, modification, and distribution of the Standard or Modified Versions

is governed by this Artistic License. By using, modifying or distributing the

Package, you accept this license. Do not use, modify, or distribute the Package,

if you do not accept this license.

(11) If your Modified Version has been derived from a Modified Version made by

someone other than you, you are nevertheless required to ensure that your

Modified Version complies with the requirements of this license.

(12) This license does not grant you the right to use any trademark, service

mark, tradename, or logo of the Copyright Holder.

(13) This license includes the non-exclusive, worldwide, free-of-charge patent

license to make, have made, use, offer to sell, sell, import and otherwise

transfer the Package with respect to any patent claims licensable by the

Copyright Holder that are necessarily infringed by the Package. If you institute

patent litigation (including a cross-claim or counterclaim) against any party

alleging that the Package constitutes direct or contributory patent infringement,

then this Artistic License to you shall terminate on the date that such

litigation is filed.

(14) Disclaimer of Warranty: THE PACKAGE IS PROVIDED BY THE COPYRIGHT HOLDER AND

CONTRIBUTORS "AS IS' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES. THE IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR

NON-INFRINGEMENT ARE DISCLAIMED TO THE EXTENT PERMITTED BY YOUR LOCAL LAW. UNLESS

REQUIRED BY LAW, NO COPYRIGHT HOLDER OR CONTRIBUTOR WILL BE LIABLE FOR ANY

DIRECT, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING IN ANY WAY OUT OF

THE USE OF THE PACKAGE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

---

BSD 2-clause "Simplified" License

(debconf 1.5.78)

License: BSD-2-clause

Files: debconf-get-selections debconf-set-selections

Copyright: 2003 Petter Reinholdtsen <pere@hungry.com>

License: BSD-2-clause

Files: Test/*

Copyright: 2005 Sylvain Ferriol <Sylvain.Ferriol@imag.fr>

License: BSD-2-clause

Files: debconf-apt-progress

Copyright: 2005-2010 Colin Watson <cjwatson@debian.org>

2005-2010 Joey Hess <joeyh@debian.org>

License: BSD-2-clause

License: BSD-2-clause

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions

are met:

1. Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

.

THIS SOFTWARE IS PROVIDED BY AUTHORS AND CONTRIBUTORS ``AS IS'' AND

ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE

FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS

OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY

OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGE

---

BSD 3-clause "New" or "Revised" License

(gperftools 2.9.1)

Copyright (c) 2005, Google Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are

met:

* Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

* Redistributions in binary form must reproduce the above

copyright notice, this list of conditions and the following disclaimer

in the documentation and/or other materials provided with the

distribution.

* Neither the name of Google Inc. nor the names of its

contributors may be used to endorse or promote products derived from

this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT

OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE

---

BSD 3-clause "New" or "Revised" License

(PrettyTable 2.5.0)

#

#

Redistribution and use in source and binary forms, with or without

# modification, are permitted provided that the following conditions are met:

#

# * Redistributions of source code must retain the above copyright notice,

# this list of conditions and the following disclaimer.

# * Redistributions in binary form must reproduce the above copyright notice,

# this list of conditions and the following disclaimer in the documentation

# and/or other materials provided with the distribution.

# * The name of the author may not be used to endorse or promote products

# derived from this software without specific prior written permission.

#

# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE

# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

# POSSIBILITY OF SUCH DAMAGE

---

BSD 3-clause "New" or "Revised" License

(Jakarta Activation 1.2.1)

Copyright (c) 2018 Oracle and/or its affiliates. All rights reserved.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions

are met:

- Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

- Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

- Neither the name of the Eclipse Foundation, Inc. nor the names of its

contributors may be used to endorse or promote products derived

from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS

IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE

---

BSD 3-clause "New" or "Revised" License

(idna 3.4)

Copyright (c) <YEAR>, <OWNER>

All rights reserved.

Redistribution and use in source and binary forms, with or without modification,

are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice, this

list of conditions and the following disclaimer.

* Redistributions in binary form must reproduce the above copyright notice,

this list of conditions and the following disclaimer in the documentation

and/or other materials provided with the distribution.

* Neither the name of the <ORGANIZATION> nor the names of its contributors may

be used to endorse or promote products derived from this software without

specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND

ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN

IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

---

Eclipse Distribution License - v 1.0

(Java Architecture for XML Binding 2.3 2.0.1.Final, jws-api 2.1.0)

Eclipse Distribution License - v 1.0

====================================

Copyright (c) 2007, Eclipse Foundation, Inc. and its licensors.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification,

are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice, this

list of conditions and the following disclaimer.

* Redistributions in binary form must reproduce the above copyright notice,

this list of conditions and the following disclaimer in the documentation

and/or other materials provided with the distribution.

* Neither the name of the Eclipse Foundation, Inc. nor the names of its

contributors may be used to endorse or promote products derived from this

software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND

ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN

IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

---

Eclipse Public License 2.0

(BlackBelt JUDO Eclipse JDK Zulu 8.0.242)

Eclipse Public License - v 2.0

==============================

THE ACCOMPANYING PROGRAM IS PROVIDED UNDER THE TERMS OF THIS ECLIPSE PUBLIC

LICENSE (“AGREEMENT”). ANY USE, REPRODUCTION OR DISTRIBUTION OF THE PROGRAM

CONSTITUTES RECIPIENT'S ACCEPTANCE OF THIS AGREEMENT.

1. DEFINITIONS

--------------

“Contribution” means:

a) in the case of the initial Contributor, the initial content Distributed

under this Agreement, and

b) in the case of each subsequent Contributor:

i) changes to the Program, and

ii) additions to the Program;

where such changes and/or additions to the Program originate from and are

Distributed by that particular Contributor. A Contribution “originates” from a

Contributor if it was added to the Program by such Contributor itself or anyone

acting on such Contributor's behalf. Contributions do not include changes or

additions to the Program that are not Modified Works.

“Contributor” means any person or entity that Distributes the Program.

“Licensed Patents” mean patent claims licensable by a Contributor which are

necessarily infringed by the use or sale of its Contribution alone or when

combined with the Program.

“Program” means the Contributions Distributed in accordance with this Agreement.

“Recipient” means anyone who receives the Program under this Agreement or any

Secondary License (as applicable), including Contributors.

“Derivative Works” shall mean any work, whether in Source Code or other form,

that is based on (or derived from) the Program and for which the editorial

revisions, annotations, elaborations, or other modifications represent, as a

whole, an original work of authorship.

“Modified Works” shall mean any work in Source Code or other form that results

from an addition to, deletion from, or modification of the contents of the

Program, including, for purposes of clarity any new file in Source Code form that

contains any contents of the Program. Modified Works shall not include works that

contain only declarations, interfaces, types, classes, structures, or files of

the Program solely in each case in order to link to, bind by name, or subclass

the Program or Modified Works thereof.

“Distribute” means the acts of a) distributing or b) making available in any

manner that enables the transfer of a copy.

“Source Code” means the form of a Program preferred for making modifications,

including but not limited to software source code, documentation source, and

configuration files.

“Secondary License” means either the GNU General Public License, Version 2.0, or

any later versions of that license, including any exceptions or additional

permissions as identified by the initial Contributor.

2. GRANT OF RIGHTS

------------------

a) Subject to the terms of this Agreement, each Contributor hereby grants

Recipient a non-exclusive, worldwide, royalty-free copyright license to

reproduce, prepare Derivative Works of, publicly display, publicly perform,

Distribute and sublicense the Contribution of such Contributor, if any, and

such Derivative Works.

b) Subject to the terms of this Agreement, each Contributor hereby grants

Recipient a non-exclusive, worldwide, royalty-free patent license under

Licensed Patents to make, use, sell, offer to sell, import and otherwise

transfer the Contribution of such Contributor, if any, in Source Code or other

form. This patent license shall apply to the combination of the Contribution

and the Program if, at the time the Contribution is added by the Contributor,

such addition of the Contribution causes such combination to be covered by the

Licensed Patents. The patent license shall not apply to any other combinations

which include the Contribution. No hardware per se is licensed hereunder.

c) Recipient understands that although each Contributor grants the licenses to

its Contributions set forth herein, no assurances are provided by any

Contributor that the Program does not infringe the patent or other intellectual

property rights of any other entity. Each Contributor disclaims any liability

to Recipient for claims brought by any other entity based on infringement of

intellectual property rights or otherwise. As a condition to exercising the

rights and licenses granted hereunder, each Recipient hereby assumes sole

responsibility to secure any other intellectual property rights needed, if any.

For example, if a third party patent license is required to allow Recipient to

Distribute the Program, it is Recipient's responsibility to acquire that

license before distributing the Program.

d) Each Contributor represents that to its knowledge it has sufficient

copyright rights in its Contribution, if any, to grant the copyright license

set forth in this Agreement.

e) Notwithstanding the terms of any Secondary License, no Contributor makes

additional grants to any Recipient (other than those set forth in this

Agreement) as a result of such Recipient's receipt of the Program under the

terms of a Secondary License (if permitted under the terms of Section 3).

3. REQUIREMENTS

---------------

3.1 If a Contributor Distributes the Program in any form, then:

a) the Program must also be made available as Source Code, in accordance with

section 3.2, and the Contributor must accompany the Program with a statement

that the Source Code for the Program is available under this Agreement, and

informs Recipients how to obtain it in a reasonable manner on or through a

medium customarily used for software exchange; and

b) the Contributor may Distribute the Program under a license different than

this Agreement, provided that such license:

i) effectively disclaims on behalf of all other Contributors all warranties

and conditions, express and implied, including warranties or conditions of

title and non-infringement, and implied warranties or conditions of

merchantability and fitness for a particular purpose;

ii) effectively excludes on behalf of all other Contributors all liability

for damages, including direct, indirect, special, incidental and

consequential damages, such as lost profits;

iii) does not attempt to limit or alter the recipients' rights in the Source

Code under section 3.2; and

iv) requires any subsequent distribution of the Program by any party to be

under a license that satisfies the requirements of this section 3.

3.2 When the Program is Distributed as Source Code:

a) it must be made available under this Agreement, or if the Program

(i) is combined with other material in a separate file or files made

available under a Secondary License, and

(ii) the initial Contributor attached to the Source Code the notice described

in Exhibit A of this Agreement, then the Program may be made available under

the terms of such Secondary Licenses, and

b) a copy of this Agreement must be included with each copy of the Program.

3.3 Contributors may not remove or alter any copyright, patent, trademark,

attribution notices, disclaimers of warranty, or limitations of liability

(‘notices’) contained within the Program from any copy of the Program which they

Distribute, provided that Contributors may add their own appropriate notices.

4. COMMERCIAL DISTRIBUTION

--------------------------

Commercial distributors of software may accept certain responsibilities with

respect to end users, business partners and the like. While this license is

intended to facilitate the commercial use of the Program, the Contributor who

includes the Program in a commercial product offering should do so in a manner

which does not create potential liability for other Contributors. Therefore, if a

Contributor includes the Program in a commercial product offering, such

Contributor (“Commercial Contributor”) hereby agrees to defend and indemnify

every other Contributor (“Indemnified Contributor”) against any losses, damages

and costs (collectively “Losses”) arising from claims, lawsuits and other legal

actions brought by a third party against the Indemnified Contributor to the

extent caused by the acts or omissions of such Commercial Contributor in

connection with its distribution of the Program in a commercial product offering.

The obligations in this section do not apply to any claims or Losses relating to

any actual or alleged intellectual property infringement. In order to qualify, an

Indemnified Contributor must: a) promptly notify the Commercial Contributor in

writing of such claim, and b) allow the Commercial Contributor to control, and

cooperate with the Commercial Contributor in, the defense and any related

settlement negotiations. The Indemnified Contributor may participate in any such

claim at its own expense.

For example, a Contributor might include the Program in a commercial product

offering, Product X. That Contributor is then a Commercial Contributor. If that

Commercial Contributor then makes performance claims, or offers warranties

related to Product X, those performance claims and warranties are such Commercial

Contributor's responsibility alone. Under this section, the Commercial

Contributor would have to defend claims against the other Contributors related to

those performance claims and warranties, and if a court requires any other

Contributor to pay any damages as a result, the Commercial Contributor must pay

those damages.

5. NO WARRANTY

--------------

EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, AND TO THE EXTENT PERMITTED BY

APPLICABLE LAW, THE PROGRAM IS PROVIDED ON AN “AS IS” BASIS, WITHOUT WARRANTIES

OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT

LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is solely

responsible for determining the appropriateness of using and distributing the

Program and assumes all risks associated with its exercise of rights under this

Agreement, including but not limited to the risks and costs of program errors,

compliance with applicable laws, damage to or loss of data, programs or

equipment, and unavailability or interruption of operations.

6. DISCLAIMER OF LIABILITY

--------------------------

EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, AND TO THE EXTENT PERMITTED BY

APPLICABLE LAW, NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY

FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE

PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED HEREUNDER, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

7. GENERAL

----------

If any provision of this Agreement is invalid or unenforceable under applicable

law, it shall not affect the validity or enforceability of the remainder of the

terms of this Agreement, and without further action by the parties hereto, such

provision shall be reformed to the minimum extent necessary to make such

provision valid and enforceable.

If Recipient institutes patent litigation against any entity (including a

cross-claim or counterclaim in a lawsuit) alleging that the Program itself

(excluding combinations of the Program with other software or hardware) infringes

such Recipient's patent(s), then such Recipient's rights granted under Section

2(b) shall terminate as of the date such litigation is filed.

All Recipient's rights under this Agreement shall terminate if it fails to comply

with any of the material terms or conditions of this Agreement and does not cure

such failure in a reasonable period of time after becoming aware of such

noncompliance. If all Recipient's rights under this Agreement terminate,

Recipient agrees to cease use and distribution of the Program as soon as

reasonably practicable. However, Recipient's obligations under this Agreement and

any licenses granted by Recipient relating to the Program shall continue and

survive.

Everyone is permitted to copy and distribute copies of this Agreement, but in

order to avoid inconsistency the Agreement is copyrighted and may only be

modified in the following manner. The Agreement Steward reserves the right to

publish new versions (including revisions) of this Agreement from time to time.

No one other than the Agreement Steward has the right to modify this Agreement.

The Eclipse Foundation is the initial Agreement Steward. The Eclipse Foundation

may assign the responsibility to serve as the Agreement Steward to a suitable

separate entity. Each new version of the Agreement will be given a distinguishing

version number. The Program (including Contributions) may always be Distributed

subject to the version of the Agreement under which it was received. In addition,

after a new version of the Agreement is published, Contributor may elect to

Distribute the Program (including its Contributions) under the new version.

Except as expressly stated in Sections 2(a) and 2(b) above, Recipient receives no

rights or licenses to the intellectual property of any Contributor under this

Agreement, whether expressly, by implication, estoppel or otherwise. All rights

in the Program not expressly granted under this Agreement are reserved. Nothing

in this Agreement is intended to be enforceable by any entity that is not a

Contributor or Recipient. No third-party beneficiary rights are created under

this Agreement.

Exhibit A – Form of Secondary Licenses Notice

---------------------------------------------

“This Source Code may also be made available under the following Secondary

Licenses when the conditions for such availability set forth in the Eclipse

Public License, v. 2.0 are satisfied: {name license(s), version(s), and

exceptions or additional permissions here}.”

Simply including a copy of this Agreement, including this Exhibit A is not

sufficient to license the Source Code under Secondary Licenses.

If it is not possible or desirable to put the notice in a particular file,

then You may include the notice in a location (such as a LICENSE file in a

relevant directory) where a recipient would be likely to look for such a

notice.

You may add additional accurate notices of copyright ownership.

---

Expat License

(dbus-python 1.2.18, libunwind v1.3.2)

Expat License

=============

Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd

                               and Clark Cooper

Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.

Permission is hereby granted, free of charge, to any person obtaining a copy of

this software and associated documentation files (the "Software"), to deal in the

Software without restriction, including without limitation the rights to use,

copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so,

subject to the following conditions:

The above copyright notice and this permission notice shall be included in all

copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR

COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN

AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION

WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

---

GNU Free Documentation License v1.2 or later

(gettext 0.21)

GNU Free Documentation License

==============================

Version 1.2, November 2002

Copyright (C) 2000,2001,2002 Free Software Foundation, Inc.

51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA

Everyone is permitted to copy and distribute verbatim copies

of this license document, but changing it is not allowed.

0. PREAMBLE

The purpose of this License is to make a manual, textbook, or other functional

and useful document "free" in the sense of freedom: to assure everyone the

effective freedom to copy and redistribute it, with or without modifying it,

either commercially or noncommercially. Secondarily, this License preserves for

the author and publisher a way to get credit for their work, while not being

considered responsible for modifications made by others.

This License is a kind of "copyleft", which means that derivative works of the

document must themselves be free in the same sense. It complements the GNU

General Public License, which is a copyleft license designed for free software.

We have designed this License in order to use it for manuals for free software,

because free software needs free documentation: a free program should come with

manuals providing the same freedoms that the software does. But this License is

not limited to software manuals; it can be used for any textual work, regardless

of subject matter or whether it is published as a printed book. We recommend this

License principally for works whose purpose is instruction or reference.

1. APPLICABILITY AND DEFINITIONS

This License applies to any manual or other work, in any medium, that contains a

notice placed by the copyright holder saying it can be distributed under the

terms of this License. Such a notice grants a world-wide, royalty-free license,

unlimited in duration, to use that work under the conditions stated herein. The

"Document", below, refers to any such manual or work. Any member of the public is

a licensee, and is addressed as "you". You accept the license if you copy, modify

or distribute the work in a way requiring permission under copyright law.

A "Modified Version" of the Document means any work containing the Document or a

portion of it, either copied verbatim, or with modifications and/or translated

into another language.

A "Secondary Section" is a named appendix or a front-matter section of the

Document that deals exclusively with the relationship of the publishers or

authors of the Document to the Document's overall subject (or to related matters)

and contains nothing that could fall directly within that overall subject. (Thus,

if the Document is in part a textbook of mathematics, a Secondary Section may not

explain any mathematics.) The relationship could be a matter of historical

connection with the subject or with related matters, or of legal, commercial,

philosophical, ethical or political position regarding them.

The "Invariant Sections" are certain Secondary Sections whose titles are

designated, as being those of Invariant Sections, in the notice that says that

the Document is released under this License. If a section does not fit the above

definition of Secondary then it is not allowed to be designated as Invariant. The

Document may contain zero Invariant Sections. If the Document does not identify

any Invariant Sections then there are none.

The "Cover Texts" are certain short passages of text that are listed, as

Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document

is released under this License. A Front-Cover Text may be at most 5 words, and a

Back-Cover Text may be at most 25 words.

A "Transparent" copy of the Document means a machine-readable copy, represented

in a format whose specification is available to the general public, that is

suitable for revising the document straightforwardly with generic text editors or

(for images composed of pixels) generic paint programs or (for drawings) some

widely available drawing editor, and that is suitable for input to text

formatters or for automatic translation to a variety of formats suitable for

input to text formatters. A copy made in an otherwise Transparent file format

whose markup, or absence of markup, has been arranged to thwart or discourage

subsequent modification by readers is not Transparent. An image format is not

Transparent if used for any substantial amount of text. A copy that is not

"Transparent" is called "Opaque".

Examples of suitable formats for Transparent copies include plain ASCII without

markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly

available DTD, and standard-conforming simple HTML, PostScript or PDF designed

for human modification. Examples of transparent image formats include PNG, XCF

and JPG. Opaque formats include proprietary formats that can be read and edited

only by proprietary word processors, SGML or XML for which the DTD and/or

processing tools are not generally available, and the machine-generated HTML,

PostScript or PDF produced by some word processors for output purposes only.

The "Title Page" means, for a printed book, the title page itself, plus such

following pages as are needed to hold, legibly, the material this License

requires to appear in the title page. For works in formats which do not have any

title page as such, "Title Page" means the text near the most prominent

appearance of the work's title, preceding the beginning of the body of the text.

A section "Entitled XYZ" means a named subunit of the Document whose title either

is precisely XYZ or contains XYZ in parentheses following text that translates

XYZ in another language. (Here XYZ stands for a specific section name mentioned

below, such as "Acknowledgements", "Dedications", "Endorsements", or "History".)

To "Preserve the Title" of such a section when you modify the Document means that

it remains a section "Entitled XYZ" according to this definition.

The Document may include Warranty Disclaimers next to the notice which states

that this License applies to the Document. These Warranty Disclaimers are

considered to be included by reference in this License, but only as regards

disclaiming warranties: any other implication that these Warranty Disclaimers may

have is void and has no effect on the meaning of this License.

2. VERBATIM COPYING

You may copy and distribute the Document in any medium, either commercially or

noncommercially, provided that this License, the copyright notices, and the

license notice saying this License applies to the Document are reproduced in all

copies, and that you add no other conditions whatsoever to those of this License.

You may not use technical measures to obstruct or control the reading or further

copying of the copies you make or distribute. However, you may accept

compensation in exchange for copies. If you distribute a large enough number of

copies you must also follow the conditions in section 3.

You may also lend copies, under the same conditions stated above, and you may

publicly display copies.

3. COPYING IN QUANTITY

If you publish printed copies (or copies in media that commonly have printed

covers) of the Document, numbering more than 100, and the Document's license

notice requires Cover Texts, you must enclose the copies in covers that carry,

clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover,

and Back-Cover Texts on the back cover. Both covers must also clearly and legibly

identify you as the publisher of these copies. The front cover must present the

full title with all words of the title equally prominent and visible. You may add

other material on the covers in addition. Copying with changes limited to the

covers, as long as they preserve the title of the Document and satisfy these

conditions, can be treated as verbatim copying in other respects.

If the required texts for either cover are too voluminous to fit legibly, you

should put the first ones listed (as many as fit reasonably) on the actual cover,

and continue the rest onto adjacent pages.

If you publish or distribute Opaque copies of the Document numbering more than

100, you must either include a machine-readable Transparent copy along with each

Opaque copy, or state in or with each Opaque copy a computer-network location

from which the general network-using public has access to download using

public-standard network protocols a complete Transparent copy of the Document,

free of added material. If you use the latter option, you must take reasonably

prudent steps, when you begin distribution of Opaque copies in quantity, to

ensure that this Transparent copy will remain thus accessible at the stated

location until at least one year after the last time you distribute an Opaque

copy (directly or through your agents or retailers) of that edition to the

public.

It is requested, but not required, that you contact the authors of the Document

well before redistributing any large number of copies, to give them a chance to

provide you with an updated version of the Document.

4. MODIFICATIONS

You may copy and distribute a Modified Version of the Document under the

conditions of sections 2 and 3 above, provided that you release the Modified

Version under precisely this License, with the Modified Version filling the role

of the Document, thus licensing distribution and modification of the Modified

Version to whoever possesses a copy of it. In addition, you must do these things

in the Modified Version:

* A. Use in the Title Page (and on the covers, if any) a title distinct from

that of the Document, and from those of previous versions (which should, if

there were any, be listed in the History section of the Document). You may

use the same title as a previous version if the original publisher of that

version gives permission.

* B. List on the Title Page, as authors, one or more persons or entities

responsible for authorship of the modifications in the Modified Version,

together with at least five of the principal authors of the Document (all of

its principal authors, if it has fewer than five), unless they release you

from this requirement.

* C. State on the Title page the name of the publisher of the Modified Version,

as the publisher.

* D. Preserve all the copyright notices of the Document.

* E. Add an appropriate copyright notice for your modifications adjacent to the

other copyright notices.

* F. Include, immediately after the copyright notices, a license notice giving

the public permission to use the Modified Version under the terms of this

License, in the form shown in the Addendum below.

* G. Preserve in that license notice the full lists of Invariant Sections and

required Cover Texts given in the Document's license notice.

* H. Include an unaltered copy of this License.

* I. Preserve the section Entitled "History", Preserve its Title, and add to it

an item stating at least the title, year, new authors, and publisher of the

Modified Version as given on the Title Page. If there is no section Entitled

"History" in the Document, create one stating the title, year, authors, and

publisher of the Document as given on its Title Page, then add an item

describing the Modified Version as stated in the previous sentence.

* J. Preserve the network location, if any, given in the Document for public

access to a Transparent copy of the Document, and likewise the network

locations given in the Document for previous versions it was based on. These

may be placed in the "History" section. You may omit a network location for a

work that was published at least four years before the Document itself, or if

the original publisher of the version it refers to gives permission.

* K. For any section Entitled "Acknowledgements" or "Dedications", Preserve the

Title of the section, and preserve in the section all the substance and tone

of each of the contributor acknowledgements and/or dedications given therein.

* L. Preserve all the Invariant Sections of the Document, unaltered in their

text and in their titles. Section numbers or the equivalent are not

considered part of the section titles.

* M. Delete any section Entitled "Endorsements". Such a section may not be

included in the Modified Version.

* N. Do not retitle any existing section to be Entitled "Endorsements" or to

conflict in title with any Invariant Section.

* O. Preserve any Warranty Disclaimers.

If the Modified Version includes new front-matter sections or appendices that

qualify as Secondary Sections and contain no material copied from the Document,

you may at your option designate some or all of these sections as invariant. To

do this, add their titles to the list of Invariant Sections in the Modified

Version's license notice. These titles must be distinct from any other section

titles.

You may add a section Entitled "Endorsements", provided it contains nothing but

endorsements of your Modified Version by various parties--for example, statements

of peer review or that the text has been approved by an organization as the

authoritative definition of a standard.

You may add a passage of up to five words as a Front-Cover Text, and a passage of

up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the

Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text

may be added by (or through arrangements made by) any one entity. If the Document

already includes a cover text for the same cover, previously added by you or by

arrangement made by the same entity you are acting on behalf of, you may not add

another; but you may replace the old one, on explicit permission from the

previous publisher that added the old one.

The author(s) and publisher(s) of the Document do not by this License give

permission to use their names for publicity for or to assert or imply endorsement

of any Modified Version.

5. COMBINING DOCUMENTS

You may combine the Document with other documents released under this License,

under the terms defined in section 4 above for modified versions, provided that

you include in the combination all of the Invariant Sections of all of the

original documents, unmodified, and list them all as Invariant Sections of your

combined work in its license notice, and that you preserve all their Warranty

Disclaimers.

The combined work need only contain one copy of this License, and multiple

identical Invariant Sections may be replaced with a single copy. If there are

multiple Invariant Sections with the same name but different contents, make the

title of each such section unique by adding at the end of it, in parentheses, the

name of the original author or publisher of that section if known, or else a

unique number. Make the same adjustment to the section titles in the list of

Invariant Sections in the license notice of the combined work.

In the combination, you must combine any sections Entitled "History" in the

various original documents, forming one section Entitled "History"; likewise

combine any sections Entitled "Acknowledgements", and any sections Entitled

"Dedications". You must delete all sections Entitled "Endorsements."

6. COLLECTIONS OF DOCUMENTS

You may make a collection consisting of the Document and other documents released

under this License, and replace the individual copies of this License in the

various documents with a single copy that is included in the collection, provided

that you follow the rules of this License for verbatim copying of each of the

documents in all other respects.

You may extract a single document from such a collection, and distribute it

individually under this License, provided you insert a copy of this License into

the extracted document, and follow this License in all other respects regarding

verbatim copying of that document.

7. AGGREGATION WITH INDEPENDENT WORKS

A compilation of the Document or its derivatives with other separate and

independent documents or works, in or on a volume of a storage or distribution

medium, is called an "aggregate" if the copyright resulting from the compilation

is not used to limit the legal rights of the compilation's users beyond what the

individual works permit. When the Document is included in an aggregate, this

License does not apply to the other works in the aggregate which are not

themselves derivative works of the Document.

If the Cover Text requirement of section 3 is applicable to these copies of the

Document, then if the Document is less than one half of the entire aggregate, the

Document's Cover Texts may be placed on covers that bracket the Document within

the aggregate, or the electronic equivalent of covers if the Document is in

electronic form. Otherwise they must appear on printed covers that bracket the

whole aggregate.

8. TRANSLATION

Translation is considered a kind of modification, so you may distribute

translations of the Document under the terms of section 4. Replacing Invariant

Sections with translations requires special permission from their copyright

holders, but you may include translations of some or all Invariant Sections in

addition to the original versions of these Invariant Sections. You may include a

translation of this License, and all the license notices in the Document, and any

Warranty Disclaimers, provided that you also include the original English version

of this License and the original versions of those notices and disclaimers. In

case of a disagreement between the translation and the original version of this

License or a notice or disclaimer, the original version will prevail.

If a section in the Document is Entitled "Acknowledgements", "Dedications", or

"History", the requirement (section 4) to Preserve its Title (section 1) will

typically require changing the actual title.

9. TERMINATION

You may not copy, modify, sublicense, or distribute the Document except as

expressly provided for under this License. Any other attempt to copy, modify,

sublicense or distribute the Document is void, and will automatically terminate

your rights under this License. However, parties who have received copies, or

rights, from you under this License will not have their licenses terminated so

long as such parties remain in full compliance.

10. FUTURE REVISIONS OF THIS LICENSE

The Free Software Foundation may publish new, revised versions of the GNU Free

Documentation License from time to time. Such new versions will be similar in

spirit to the present version, but may differ in detail to address new problems

or concerns. See http://www.gnu.org/copyleft/.

Each version of the License is given a distinguishing version number. If the

Document specifies that a particular numbered version of this License "or any

later version" applies to it, you have the option of following the terms and

conditions either of that specified version or of any later version that has been

published (not as a draft) by the Free Software Foundation. If the Document does

not specify a version number of this License, you may choose any version ever

published (not as a draft) by the Free Software Foundation.

How to use this License for your documents

To use this License in a document you have written, include a copy of the License

in the document and put the following copyright and license notices just after

the title page:

Copyright (c) YEAR YOUR NAME.

Permission is granted to copy, distribute and/or modify this document

under the terms of the GNU Free Documentation License, Version 1.2

or any later version published by the Free Software Foundation;

with no Invariant Sections, no Front-Cover Texts, and no Back-Cover

Texts. A copy of the license is included in the section entitled "GNU

Free Documentation License".

If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, replace

the "with...Texts." line with this:

with the Invariant Sections being LIST THEIR TITLES, with the

Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST.

If you have Invariant Sections without Cover Texts, or some other combination of

the three, merge those two alternatives to suit the situation.

If your document contains nontrivial examples of program code, we recommend

releasing these examples in parallel under your choice of free software license,

such as the GNU General Public License, to permit their use in free software.

---

GNU General Public License v1.0 or later

(Archive-Tar 2.38, IO::Compress 2.102, libpod-simple-perl 3.42, libtest-simple-perl 1.302183, Perl 5.34.0, perl-DBM_Filter 0.06, perl-ExtUtils-Constant 0.25, perl-gettext 1.07, perl-IPC-SysV 2.09, Test::Harness 3.43, ubuntu-keyring 2021.03.26)

"This program is free software; you can redistribute it and/or modify it under

the terms of version 1 of the GNU General Public License as published by the Free

Software Foundation."

GNU GENERAL PUBLIC LICENSE

Version 1, February 1989

==========================

Copyright (C) 1989 Free Software Foundation, Inc. 675 Mass Ave, Cambridge, MA

02139, USA

Everyone is permitted to copy and distribute verbatim copies of this license

document, but changing it is not allowed.

Preamble

The license agreements of most software companies try to keep users at the mercy

of those companies. By contrast, our General Public License is intended to

guarantee your freedom to share and change free software--to make sure the

software is free for all its users. The General Public License applies to the

Free Software Foundation's software and to any other program whose authors commit

to using it. You can use it for your programs, too.

When we speak of free software, we are referring to freedom, not price.

Specifically, the General Public License is designed to make sure that you have

the freedom to give away or sell copies of free software, that you receive source

code or can get it if you want it, that you can change the software or use pieces

of it in new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny

you these rights or to ask you to surrender the rights. These restrictions

translate to certain responsibilities for you if you distribute copies of the

software, or if you modify it.

For example, if you distribute copies of a such a program, whether gratis or for

a fee, you must give the recipients all the rights that you have. You must make

sure that they, too, receive or can get the source code. And you must tell them

their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer

you this license which gives you legal permission to copy, distribute and/or

modify the software.

Also, for each author's protection and ours, we want to make certain that

everyone understands that there is no warranty for this free software. If the

software is modified by someone else and passed on, we want its recipients to

know that what they have is not the original, so that any problems introduced by

others will not reflect on the original authors' reputations.

The precise terms and conditions for copying, distribution and modification

follow.

GNU GENERAL PUBLIC LICENSE

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

1. This License Agreement applies to any program or other work which contains

a notice placed by the copyright holder saying it may be distributed under

the terms of this General Public License. The "Program", below, refers to any

such program or work, and a "work based on the Program" means either the

Program or any work containing the Program or a portion of it, either

verbatim or with modifications. Each licensee is addressed as "you".

2. You may copy and distribute verbatim copies of the Program's source code as

you receive it, in any medium, provided that you conspicuously and

appropriately publish on each copy an appropriate copyright notice and

disclaimer of warranty; keep intact all the notices that refer to this

General Public License and to the absence of any warranty; and give any other

recipients of the Program a copy of this General Public License along with

the Program. You may charge a fee for the physical act of transferring a

copy.

3. You may modify your copy or copies of the Program or any portion of it, and

copy and distribute such modifications under the terms of Paragraph 1 above,

provided that you also do the following:

a. cause the modified files to carry prominent notices stating that you

changed the files and the date of any change; and

b. cause the whole of any work that you distribute or publish, that in

whole or in part contains the Program or any part thereof, either with or

without modifications, to be licensed at no charge to all third parties

under the terms of this General Public License (except that you may

choose to grant warranty protection to some or all third parties, at your

option).

c. If the modified program normally reads commands interactively when run,

you must cause it, when started running for such interactive use in the

simplest and most usual way, to print or display an announcement

including an appropriate copyright notice and a notice that there is no

warranty (or else, saying that you provide a warranty) and that users may

redistribute the program under these conditions, and telling the user how

to view a copy of this General Public License.

d. You may charge a fee for the physical act of transferring a copy, and

you may at your option offer warranty protection in exchange for a fee.

Mere aggregation of another independent work with the Program (or its

derivative) on a volume of a storage or distribution medium does not bring

the other work under the scope of these terms.

4. You may copy and distribute the Program (or a portion or derivative of it,

under Paragraph 2) in object code or executable form under the terms of

Paragraphs 1 and 2 above provided that you also do one of the following:

a. accompany it with the complete corresponding machine-readable source

code, which must be distributed under the terms of Paragraphs 1 and 2

above; or,

b. accompany it with a written offer, valid for at least three years, to

give any third party free (except for a nominal charge for the cost of

distribution) a complete machine-readable copy of the corresponding

source code, to be distributed under the terms of Paragraphs 1 and 2

above; or,

c. accompany it with the information you received as to where the

corresponding source code may be obtained. (This alternative is allowed

only for noncommercial distribution and only if you received the program

in object code or executable form alone.)

Source code for a work means the preferred form of the work for making

modifications to it. For an executable file, complete source code means all

the source code for all modules it contains; but, as a special exception, it

need not include source code for modules which are standard libraries that

accompany the operating system on which the executable file runs, or for

standard header files or definitions files that accompany that operating

system.

5. You may not copy, modify, sublicense, distribute or transfer the Program

except as expressly provided under this General Public License. Any attempt

otherwise to copy, modify, sublicense, distribute or transfer the Program is

void, and will automatically terminate your rights to use the Program under

this License. However, parties who have received copies, or rights to use

copies, from you under this General Public License will not have their

licenses terminated so long as such parties remain in full compliance.

6. By copying, distributing or modifying the Program (or any work based on the

Program) you indicate your acceptance of this license to do so, and all its

terms and conditions.

7. Each time you redistribute the Program (or any work based on the Program),

the recipient automatically receives a license from the original licensor to

copy, distribute or modify the Program subject to these terms and conditions.

You may not impose any further restrictions on the recipients' exercise of

the rights granted herein.

8. The Free Software Foundation may publish revised and/or new versions of the

General Public License from time to time. Such new versions will be similar

in spirit to the present version, but may differ in detail to address new

problems or concerns.

Each version is given a distinguishing version number. If the Program

specifies a version number of the license which applies to it and "any later

version", you have the option of following the terms and conditions either of

that version or of any later version published by the Free Software

Foundation. If the Program does not specify a version number of the license,

you may choose any version ever published by the Free Software Foundation.

9. If you wish to incorporate parts of the Program into other free programs

whose distribution conditions are different, write to the author to ask for

permission. For software which is copyrighted by the Free Software

Foundation, write to the Free Software Foundation; we sometimes make

exceptions for this. Our decision will be guided by the two goals of

preserving the free status of all derivatives of our free software and of

promoting the sharing and reuse of software generally.

NO WARRANTY

9. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE

PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE

STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE

PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND

PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE,

YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

10. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL

ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE

THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY

GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE

OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR

DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR

A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH

HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

Appendix: How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use

to humanity, the best way to achieve this is to make it free software which

everyone can redistribute and change under these terms.

To do so, attach the following notices to the program. It is safest to attach

them to the start of each source file to most effectively convey the exclusion of

warranty; and each file should have at least the "copyright" line and a pointer

to where the full notice is found.

Copyright (C) 19yy

This program is free software; you can redistribute it and/or modify it under the

terms of the GNU General Public License as published by the Free Software

Foundation; either version 1, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY

WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A

PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this

program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave,

Cambridge, MA 02139, USA.

Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this when it

starts in an interactive mode:

Gnomovision version 69, Copyright (C) 19xx name of author Gnomovision comes with

ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you

are welcome to redistribute it under certain conditions; type `show c' for

details.

The hypothetical commands `show w' and `show c' should show the appropriate parts

of the General Public License. Of course, the commands you use may be called

something other than `show w' and `show c'; they could even be mouse-clicks or

menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or your school,

if any, to sign a "copyright disclaimer" for the program, if necessary. Here a

sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program

`Gnomovision' (a program to direct compilers to make passes at assemblers)

written by James Hacker.

, 1 April 1989 Ty Coon, President of Vice

That's all there is to it!

---

GNU General Public License v2.0 only

(GlusterFS v11.1, iptables-backend-nft 1.8.7, linux-firmware 20220329.git681281e4, linux-firmware 20230919.git3672ccab, lsb 11.1.0ubuntu1)

The GNU General Public License (GPL)

====================================

Version 2, June 1991

--------------------

Copyright (C) 1989, 1991 Free Software Foundation, Inc.

59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

Everyone is permitted to copy and distribute verbatim copies

of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share

and change it. By contrast, the GNU General Public License is intended to

guarantee your freedom to share and change free software--to make sure the

software is free for all its users. This General Public License applies to most

of the Free Software Foundation's software and to any other program whose authors

commit to using it. (Some other Free Software Foundation software is covered by

the GNU Library General Public License instead.) You can apply it to your

programs, too.

When we speak of free software, we are referring to freedom, not price. Our

General Public Licenses are designed to make sure that you have the freedom to

distribute copies of free software (and charge for this service if you wish),

that you receive source code or can get it if you want it, that you can change

the software or use pieces of it in new free programs; and that you know you can

do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny

you these rights or to ask you to surrender the rights. These restrictions

translate to certain responsibilities for you if you distribute copies of the

software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a

fee, you must give the recipients all the rights that you have. You must make

sure that they, too, receive or can get the source code. And you must show them

these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer

you this license which gives you legal permission to copy, distribute and/or

modify the software.

Also, for each author's protection and ours, we want to make certain that

everyone understands that there is no warranty for this free software. If the

software is modified by someone else and passed on, we want its recipients to

know that what they have is not the original, so that any problems introduced by

others will not reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish

to avoid the danger that redistributors of a free program will individually

obtain patent licenses, in effect making the program proprietary. To prevent

this, we have made it clear that any patent must be licensed for everyone's free

use or not licensed at all.

The precise terms and conditions for copying, distribution and modification

follow.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice

placed by the copyright holder saying it may be distributed under the terms of

this General Public License. The "Program", below, refers to any such program or

work, and a "work based on the Program" means either the Program or any

derivative work under copyright law: that is to say, a work containing the

Program or a portion of it, either verbatim or with modifications and/or

translated into another language. (Hereinafter, translation is included without

limitation in the term "modification".) Each licensee is addressed as "you".

Activities other than copying, distribution and modification are not covered by

this License; they are outside its scope. The act of running the Program is not

restricted, and the output from the Program is covered only if its contents

constitute a work based on the Program (independent of having been made by

running the Program). Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Program's source code as

you receive it, in any medium, provided that you conspicuously and appropriately

publish on each copy an appropriate copyright notice and disclaimer of warranty;

keep intact all the notices that refer to this License and to the absence of any

warranty; and give any other recipients of the Program a copy of this License

along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may at

your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus

forming a work based on the Program, and copy and distribute such modifications

or work under the terms of Section 1 above, provided that you also meet all of

these conditions:

a) You must cause the modified files to carry prominent notices stating

that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or

in part contains or is derived from the Program or any part thereof, to be

licensed as a whole at no charge to all third parties under the terms of

this License.

c) If the modified program normally reads commands interactively when run,

you must cause it, when started running for such interactive use in the

most ordinary way, to print or display an announcement including an

appropriate copyright notice and a notice that there is no warranty (or

else, saying that you provide a warranty) and that users may redistribute

the program under these conditions, and telling the user how to view a copy

of this License. (Exception: if the Program itself is interactive but does

not normally print such an announcement, your work based on the Program is

not required to print an announcement.)

These requirements apply to the modified work as a whole. If identifiable

sections of that work are not derived from the Program, and can be reasonably

considered independent and separate works in themselves, then this License, and

its terms, do not apply to those sections when you distribute them as separate

works. But when you distribute the same sections as part of a whole which is a

work based on the Program, the distribution of the whole must be on the terms of

this License, whose permissions for other licensees extend to the entire whole,

and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights

to work written entirely by you; rather, the intent is to exercise the right to

control the distribution of derivative or collective works based on the Program.

In addition, mere aggregation of another work not based on the Program with the

Program (or with a work based on the Program) on a volume of a storage or

distribution medium does not bring the other work under the scope of this

License.

3. You may copy and distribute the Program (or a work based on it, under Section

2) in object code or executable form under the terms of Sections 1 and 2 above

provided that you also do one of the following:

a) Accompany it with the complete corresponding machine-readable source

code, which must be distributed under the terms of Sections 1 and 2 above

on a medium customarily used for software interchange; or,

b) Accompany it with a written offer, valid for at least three years, to

give any third party, for a charge no more than your cost of physically

performing source distribution, a complete machine-readable copy of the

corresponding source code, to be distributed under the terms of Sections 1

and 2 above on a medium customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer to

distribute corresponding source code. (This alternative is allowed only for

noncommercial distribution

and only if you received the program in object code or executable form with such

an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for making

modifications to it. For an executable work, complete source code means all the

source code for all modules it contains, plus any associated interface definition

files, plus the scripts used to control compilation and installation of the

executable. However, as a special exception, the source code distributed need not

include anything that is normally distributed (in either source or binary form)

with the major components (compiler, kernel, and so on) of the operating system

on which the executable runs, unless that component itself accompanies the

executable.

If distribution of executable or object code is made by offering access to copy

from a designated place, then offering equivalent access to copy the source code

from the same place counts as distribution of the source code, even though third

parties are not compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as

expressly provided under this License. Any attempt otherwise to copy, modify,

sublicense or distribute the Program is void, and will automatically terminate

your rights under this License. However, parties who have received copies, or

rights, from you under this License will not have their licenses terminated so

long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it.

However, nothing else grants you permission to modify or distribute the Program

or its derivative works. These actions are prohibited by law if you do not accept

this License. Therefore, by modifying or distributing the Program (or any work

based on the Program), you indicate your acceptance of this License to do so, and

all its terms and conditions for copying, distributing or modifying the Program

or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the

recipient automatically receives a license from the original licensor to copy,

distribute or modify the Program subject to these terms and conditions. You may

not impose any further restrictions on the recipients' exercise of the rights

granted herein. You are not responsible for enforcing compliance by third parties

to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement

or for any other reason (not limited to patent issues), conditions are imposed on

you (whether by court order, agreement or otherwise) that contradict the

conditions of this License, they do not excuse you from the conditions of this

License. If you cannot distribute so as to satisfy simultaneously your

obligations under this License and any other pertinent obligations, then as a

consequence you may not distribute the Program at all. For example, if a patent

license would not permit royalty-free redistribution of the Program by all those

who receive copies directly or indirectly through you, then the only way you

could satisfy both it and this License would be to refrain entirely from

distribution of the Program.

If any portion of this section is held invalid or unenforceable under any

particular circumstance, the balance of the section is intended to apply and the

section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or

other property right claims or to contest validity of any such claims; this

section has the sole purpose of protecting the integrity of the free software

distribution system, which is implemented by public license practices. Many

people have made generous contributions to the wide range of software distributed

through that system in reliance on consistent application of that system; it is

up to the author/donor to decide if he or she is willing to distribute software

through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a

consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain

countries either by patents or by copyrighted interfaces, the original copyright

holder who places the Program under this License may add an explicit geographical

distribution limitation excluding those countries, so that distribution is

permitted only in or among countries not thus excluded. In such case, this

License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the

General Public License from time to time. Such new versions will be similar in

spirit to the present version, but may differ in detail to address new problems

or concerns.

Each version is given a distinguishing version number. If the Program specifies a

version number of this License which applies to it and "any later version", you

have the option of following the terms and conditions either of that version or

of any later version published by the Free Software Foundation. If the Program

does not specify a version number of this License, you may choose any version

ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs

whose distribution conditions are different, write to the author to ask for

permission. For software which is copyrighted by the Free Software Foundation,

write to the Free Software Foundation; we sometimes make exceptions for this. Our

decision will be guided by the two goals of preserving the free status of all

derivatives of our free software and of promoting the sharing and reuse of

software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE

PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED

IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"

WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE

PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF

ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL

ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE

PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY

TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING

RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF

THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER

PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

---

GNU General Public License v2.0 or later

(autodie 2.34, base-files 11.1ubuntu1, D-Bus 1.12.18, dracut 051, ExtUtils::ParseXS 3.35, glusterfs-events 9.3, IPTables v1.8.4, jigit 1.22, Linux Kernel 6.5.0, Locales 2.35, pwm-project/pwm v2_0_6, ubuntu-keyring 2021.03.26, usrmerge 24ubuntu3.1, ZD1211 USB WLAN Linux Driver 1.5)

The GNU General Public License (GPL)

====================================

Version 2, June 1991

--------------------

Copyright (C) 1989, 1991 Free Software Foundation, Inc.

59 Temple Place, Suite 330, Boston, MA 02111-1307 USAEveryone is permitted to copy and distribute verbatim copies

of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share

and change it. By contrast, the GNU General Public License is intended to

guarantee your freedom to share and change free software--to make sure the

software is free for all its users. This General Public License applies to most

of the Free Software Foundation's software and to any other program whose authors

commit to using it. (Some other Free Software Foundation software is covered by

the GNU Library General Public License instead.) You can apply it to your

programs, too.

When we speak of free software, we are referring to freedom, not price. Our

General Public Licenses are designed to make sure that you have the freedom to

distribute copies of free software (and charge for this service if you wish),

that you receive source code or can get it if you want it, that you can change

the software or use pieces of it in new free programs; and that you know you can

do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny

you these rights or to ask you to surrender the rights. These restrictions

translate to certain responsibilities for you if you distribute copies of the

software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a

fee, you must give the recipients all the rights that you have. You must make

sure that they, too, receive or can get the source code. And you must show them

these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer

you this license which gives you legal permission to copy, distribute and/or

modify the software.

Also, for each author's protection and ours, we want to make certain that

everyone understands that there is no warranty for this free software. If the

software is modified by someone else and passed on, we want its recipients to

know that what they have is not the original, so that any problems introduced by

others will not reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish

to avoid the danger that redistributors of a free program will individually

obtain patent licenses, in effect making the program proprietary. To prevent

this, we have made it clear that any patent must be licensed for everyone's free

use or not licensed at all.

The precise terms and conditions for copying, distribution and modification

follow.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

1. This License applies to any program or other work which contains a notice

placed by the copyright holder saying it may be distributed under the terms

of this General Public License. The "Program", below, refers to any such

program or work, and a "work based on the Program" means either the Program

or any derivative work under copyright law: that is to say, a work containing

the Program or a portion of it, either verbatim or with modifications and/or

translated into another language. (Hereinafter, translation is included

without limitation in the term "modification".) Each licensee is addressed as

"you".

Activities other than copying, distribution and modification are not covered

by this License; they are outside its scope. The act of running the Program

is not restricted, and the output from the Program is covered only if its

contents constitute a work based on the Program (independent of having been

made by running the Program). Whether that is true depends on what the

Program does.

2. You may copy and distribute verbatim copies of the Program's source code as

you receive it, in any medium, provided that you conspicuously and

appropriately publish on each copy an appropriate copyright notice and

disclaimer of warranty; keep intact all the notices that refer to this

License and to the absence of any warranty; and give any other recipients of

the Program a copy of this License along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may

at your option offer warranty protection in exchange for a fee.

3. You may modify your copy or copies of the Program or any portion of it, thus

forming a work based on the Program, and copy and distribute such

modifications or work under the terms of Section 1 above, provided that you

also meet all of these conditions:

a. You must cause the modified files to carry prominent notices stating

that you changed the files and the date of any change.

b. You must cause any work that you distribute or publish, that in whole or

in part contains or is derived from the Program or any part thereof, to

be licensed as a whole at no charge to all third parties under the terms

of this License.

c. If the modified program normally reads commands interactively when run,

you must cause it, when started running for such interactive use in the

most ordinary way, to print or display an announcement including an

appropriate copyright notice and a notice that there is no warranty (or

else, saying that you provide a warranty) and that users may redistribute

the program under these conditions, and telling the user how to view a

copy of this License. (Exception: if the Program itself is interactive

but does not normally print such an announcement, your work based on the

Program is not required to print an announcement.)

These requirements apply to the modified work as a whole. If identifiable

sections of that work are not derived from the Program, and can be reasonably

considered independent and separate works in themselves, then this License,

and its terms, do not apply to those sections when you distribute them as

separate works. But when you distribute the same sections as part of a whole

which is a work based on the Program, the distribution of the whole must be

on the terms of this License, whose permissions for other licensees extend to

the entire whole, and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your

rights to work written entirely by you; rather, the intent is to exercise the

right to control the distribution of derivative or collective works based on

the Program.

In addition, mere aggregation of another work not based on the Program with

the Program (or with a work based on the Program) on a volume of a storage or

distribution medium does not bring the other work under the scope of this

License.

4. You may copy and distribute the Program (or a work based on it, under

Section 2) in object code or executable form under the terms of Sections 1

and 2 above provided that you also do one of the following:

a. Accompany it with the complete corresponding machine-readable source

code, which must be distributed under the terms of Sections 1 and 2 above

on a medium customarily used for software interchange; or,

b. Accompany it with a written offer, valid for at least three years, to

give any third party, for a charge no more than your cost of physically

performing source distribution, a complete machine-readable copy of the

corresponding source code, to be distributed under the terms of Sections

1 and 2 above on a medium customarily used for software interchange; or,

c. Accompany it with the information you received as to the offer to

distribute corresponding source code. (This alternative is allowed only

for noncommercial distribution and only if you received the program in

object code or executable form with such an offer, in accord with

Subsection b above.)

The source code for a work means the preferred form of the work for making

modifications to it. For an executable work, complete source code means all

the source code for all modules it contains, plus any associated interface

definition files, plus the scripts used to control compilation and

installation of the executable. However, as a special exception, the source

code distributed need not include anything that is normally distributed (in

either source or binary form) with the major components (compiler, kernel,

and so on) of the operating system on which the executable runs, unless that

component itself accompanies the executable.

If distribution of executable or object code is made by offering access to

copy from a designated place, then offering equivalent access to copy the

source code from the same place counts as distribution of the source code,

even though third parties are not compelled to copy the source along with the

object code.

5. You may not copy, modify, sublicense, or distribute the Program except as

expressly provided under this License. Any attempt otherwise to copy, modify,

sublicense or distribute the Program is void, and will automatically

terminate your rights under this License. However, parties who have received

copies, or rights, from you under this License will not have their licenses

terminated so long as such parties remain in full compliance.

6. You are not required to accept this License, since you have not signed it.

However, nothing else grants you permission to modify or distribute the

Program or its derivative works. These actions are prohibited by law if you

do not accept this License. Therefore, by modifying or distributing the

Program (or any work based on the Program), you indicate your acceptance of

this License to do so, and all its terms and conditions for copying,

distributing or modifying the Program or works based on it.

7. Each time you redistribute the Program (or any work based on the Program),

the recipient automatically receives a license from the original licensor to

copy, distribute or modify the Program subject to these terms and conditions.

You may not impose any further restrictions on the recipients' exercise of

the rights granted herein. You are not responsible for enforcing compliance

by third parties to this License.

8. If, as a consequence of a court judgment or allegation of patent

infringement or for any other reason (not limited to patent issues),

conditions are imposed on you (whether by court order, agreement or

otherwise) that contradict the conditions of this License, they do not excuse

you from the conditions of this License. If you cannot distribute so as to

satisfy simultaneously your obligations under this License and any other

pertinent obligations, then as a consequence you may not distribute the

Program at all. For example, if a patent license would not permit

royalty-free redistribution of the Program by all those who receive copies

directly or indirectly through you, then the only way you could satisfy both

it and this License would be to refrain entirely from distribution of the

Program.

If any portion of this section is held invalid or unenforceable under any

particular circumstance, the balance of the section is intended to apply and

the section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents

or other property right claims or to contest validity of any such claims;

this section has the sole purpose of protecting the integrity of the free

software distribution system, which is implemented by public license

practices. Many people have made generous contributions to the wide range of

software distributed through that system in reliance on consistent

application of that system; it is up to the author/donor to decide if he or

she is willing to distribute software through any other system and a licensee

cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a

consequence of the rest of this License.

9. If the distribution and/or use of the Program is restricted in certain

countries either by patents or by copyrighted interfaces, the original

copyright holder who places the Program under this License may add an

explicit geographical distribution limitation excluding those countries, so

that distribution is permitted only in or among countries not thus excluded.

In such case, this License incorporates the limitation as if written in the

body of this License.

10. The Free Software Foundation may publish revised and/or new versions of the

General Public License from time to time. Such new versions will be similar

in spirit to the present version, but may differ in detail to address new

problems or concerns.

Each version is given a distinguishing version number. If the Program

specifies a version number of this License which applies to it and "any later

version", you have the option of following the terms and conditions either of

that version or of any later version published by the Free Software

Foundation. If the Program does not specify a version number of this License,

you may choose any version ever published by the Free Software Foundation.

11. If you wish to incorporate parts of the Program into other free programs

whose distribution conditions are different, write to the author to ask for

permission. For software which is copyrighted by the Free Software

Foundation, write to the Free Software Foundation; we sometimes make

exceptions for this. Our decision will be guided by the two goals of

preserving the free status of all derivatives of our free software and of

promoting the sharing and reuse of software generally.

NO WARRANTY

12. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR

THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE

STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE

PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND

PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE,

YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

13. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL

ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE

THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY

GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE

OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR

DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR

A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH

HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use

to the public, the best way to achieve this is to make it free software which

everyone can redistribute and change under these terms.

To do so, attach the following notices to the program. It is safest to attach

them to the start of each source file to most effectively convey the exclusion of

warranty; and each file should have at least the "copyright" line and a pointer

to where the full notice is found.

one line to give the program's name and a brief idea of what it does.Copyright (C)

This program is free software; you can redistribute it and/or

modify it under the terms of the GNU General Public License

as published by the Free Software Foundation; either version 2

of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this program; if not, write to the Free Software

Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this when it

starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author

Gnomovision comes with ABSOLUTELY NO WARRANTY; for details

type `show w'. This is free software, and you are welcome

to redistribute it under certain conditions; type `show c'

for details.

The hypothetical commands `show w' and `show c' should show the appropriate parts

of the General Public License. Of course, the commands you use may be called

something other than `show w' and `show c'; they could even be mouse-clicks or

menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or your school,

if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a

sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright

interest in the program `Gnomovision'

(which makes passes at compilers) written

by James Hacker.

signature of Ty Coon, 1 April 1989

Ty Coon, President of Vice

This General Public License does not permit incorporating your program into

proprietary programs. If your program is a subroutine library, you may consider

it more useful to permit linking proprietary applications with the library. If

this is what you want to do, use the GNU Library General Public License instead

of this License.

---

GNU General Public License v2.0 w/Classpath exception

(karakun/OpenWebStart v1.8.0, nashorn jdk8u265-b01-x1, OpenJDK 1.8.0.372.b07, OpenJDK 1.8.0.382.b05, OpenJDK 8u402-ga)

GNU Classpath License

=====================

The GNU General Public License (GPL)

------------------------------------

Version 2, June 1991

--------------------

Copyright (C) 1989, 1991 Free Software Foundation, Inc.

59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

Everyone is permitted to copy and distribute verbatim copies

of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share

and change it. By contrast, the GNU General Public License is intended to

guarantee your freedom to share and change free software--to make sure the

software is free for all its users. This General Public License applies to most

of the Free Software Foundation's software and to any other program whose authors

commit to using it. (Some other Free Software Foundation software is covered by

the GNU Library General Public License instead.) You can apply it to your

programs, too.

When we speak of free software, we are referring to freedom, not price. Our

General Public Licenses are designed to make sure that you have the freedom to

distribute copies of free software (and charge for this service if you wish),

that you receive source code or can get it if you want it, that you can change

the software or use pieces of it in new free programs; and that you know you can

do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny

you these rights or to ask you to surrender the rights. These restrictions

translate to certain responsibilities for you if you distribute copies of the

software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a

fee, you must give the recipients all the rights that you have. You must make

sure that they, too, receive or can get the source code. And you must show them

these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer

you this license which gives you legal permission to copy, distribute and/or

modify the software.

Also, for each author's protection and ours, we want to make certain that

everyone understands that there is no warranty for this free software. If the

software is modified by someone else and passed on, we want its recipients to

know that what they have is not the original, so that any problems introduced by

others will not reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish

to avoid the danger that redistributors of a free program will individually

obtain patent licenses, in effect making the program proprietary. To prevent

this, we have made it clear that any patent must be licensed for everyone's free

use or not licensed at all.

The precise terms and conditions for copying, distribution and modification

follow.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice

placed by the copyright holder saying it may be distributed under the terms of

this General Public License. The "Program", below, refers to any such program or

work, and a "work based on the Program" means either the Program or any

derivative work under copyright law: that is to say, a work containing the

Program or a portion of it, either verbatim or with modifications and/or

translated into another language. (Hereinafter, translation is included without

limitation in the term "modification".) Each licensee is addressed as "you".

Activities other than copying, distribution and modification are not covered by

this License; they are outside its scope. The act of running the Program is not

restricted, and the output from the Program is covered only if its contents

constitute a work based on the Program (independent of having been made by

running the Program). Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Program's source code as

you receive it, in any medium, provided that you conspicuously and appropriately

publish on each copy an appropriate copyright notice and disclaimer of warranty;

keep intact all the notices that refer to this License and to the absence of any

warranty; and give any other recipients of the Program a copy of this License

along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may at

your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus

forming a work based on the Program, and copy and distribute such modifications

or work under the terms of Section 1 above, provided that you also meet all of

these conditions:

a) You must cause the modified files to carry prominent notices stating

that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or

in part contains or is derived from the Program or any part thereof, to be

licensed as a whole at no charge to all third parties under the terms of

this License.

c) If the modified program normally reads commands interactively when run,

you must cause it, when started running for such interactive use in the

most ordinary way, to print or display an announcement including an

appropriate copyright notice and a notice that there is no warranty (or

else, saying that you provide a warranty) and that users may redistribute

the program under these conditions, and telling the user how to view a copy

of this License. (Exception: if the Program itself is interactive but does

not normally print such an announcement, your work based on the Program is

not required to print an announcement.)

These requirements apply to the modified work as a whole. If identifiable

sections of that work are not derived from the Program, and can be reasonably

considered independent and separate works in themselves, then this License, and

its terms, do not apply to those sections when you distribute them as separate

works. But when you distribute the same sections as part of a whole which is a

work based on the Program, the distribution of the whole must be on the terms of

this License, whose permissions for other licensees extend to the entire whole,

and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights

to work written entirely by you; rather, the intent is to exercise the right to

control the distribution of derivative or collective works based on the Program.

In addition, mere aggregation of another work not based on the Program with the

Program (or with a work based on the Program) on a volume of a storage or

distribution medium does not bring the other work under the scope of this

License.

3. You may copy and distribute the Program (or a work based on it, under Section

2) in object code or executable form under the terms of Sections 1 and 2 above

provided that you also do one of the following:

a) Accompany it with the complete corresponding machine-readable source

code, which must be distributed under the terms of Sections 1 and 2 above

on a medium customarily used for software interchange; or,

b) Accompany it with a written offer, valid for at least three years, to

give any third party, for a charge no more than your cost of physically

performing source distribution, a complete machine-readable copy of the

corresponding source code, to be distributed under the terms of Sections 1

and 2 above on a medium customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer to

distribute corresponding source code. (This alternative is allowed only for

noncommercial distribution

and only if you received the program in object code or executable form with such

an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for making

modifications to it. For an executable work, complete source code means all the

source code for all modules it contains, plus any associated interface definition

files, plus the scripts used to control compilation and installation of the

executable. However, as a special exception, the source code distributed need not

include anything that is normally distributed (in either source or binary form)

with the major components (compiler, kernel, and so on) of the operating system

on which the executable runs, unless that component itself accompanies the

executable.

If distribution of executable or object code is made by offering access to copy

from a designated place, then offering equivalent access to copy the source code

from the same place counts as distribution of the source code, even though third

parties are not compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as

expressly provided under this License. Any attempt otherwise to copy, modify,

sublicense or distribute the Program is void, and will automatically terminate

your rights under this License. However, parties who have received copies, or

rights, from you under this License will not have their licenses terminated so

long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it.

However, nothing else grants you permission to modify or distribute the Program

or its derivative works. These actions are prohibited by law if you do not accept

this License. Therefore, by modifying or distributing the Program (or any work

based on the Program), you indicate your acceptance of this License to do so, and

all its terms and conditions for copying, distributing or modifying the Program

or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the

recipient automatically receives a license from the original licensor to copy,

distribute or modify the Program subject to these terms and conditions. You may

not impose any further restrictions on the recipients' exercise of the rights

granted herein. You are not responsible for enforcing compliance by third parties

to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement

or for any other reason (not limited to patent issues), conditions are imposed on

you (whether by court order, agreement or otherwise) that contradict the

conditions of this License, they do not excuse you from the conditions of this

License. If you cannot distribute so as to satisfy simultaneously your

obligations under this License and any other pertinent obligations, then as a

consequence you may not distribute the Program at all. For example, if a patent

license would not permit royalty-free redistribution of the Program by all those

who receive copies directly or indirectly through you, then the only way you

could satisfy both it and this License would be to refrain entirely from

distribution of the Program.

If any portion of this section is held invalid or unenforceable under any

particular circumstance, the balance of the section is intended to apply and the

section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or

other property right claims or to contest validity of any such claims; this

section has the sole purpose of protecting the integrity of the free software

distribution system, which is implemented by public license practices. Many

people have made generous contributions to the wide range of software distributed

through that system in reliance on consistent application of that system; it is

up to the author/donor to decide if he or she is willing to distribute software

through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a

consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain

countries either by patents or by copyrighted interfaces, the original copyright

holder who places the Program under this License may add an explicit geographical

distribution limitation excluding those countries, so that distribution is

permitted only in or among countries not thus excluded. In such case, this

License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the

General Public License from time to time. Such new versions will be similar in

spirit to the present version, but may differ in detail to address new problems

or concerns.

Each version is given a distinguishing version number. If the Program specifies a

version number of this License which applies to it and "any later version", you

have the option of following the terms and conditions either of that version or

of any later version published by the Free Software Foundation. If the Program

does not specify a version number of this License, you may choose any version

ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs

whose distribution conditions are different, write to the author to ask for

permission. For software which is copyrighted by the Free Software Foundation,

write to the Free Software Foundation; we sometimes make exceptions for this. Our

decision will be guided by the two goals of preserving the free status of all

derivatives of our free software and of promoting the sharing and reuse of

software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE

PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED

IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"

WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE

PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF

ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL

ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE

PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY

TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING

RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF

THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER

PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use

to the public, the best way to achieve this is to make it free software which

everyone can redistribute and change under these terms.

To do so, attach the following notices to the program. It is safest to attach

them to the start of each source file to most effectively convey the exclusion of

warranty; and each file should have at least the "copyright" line and a pointer

to where the full notice is found.

one line to give the program's name and a brief idea of what it does.

Copyright (C)

This program is free software; you can redistribute it and/or modify it

under the terms of the GNU General Public License as published by the Free

Software Foundation; either version 2 of the License, or (at your option)

any later version.

This program is distributed in the hope that it will be useful, but WITHOUT

ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for

more details.

You should have received a copy of the GNU General Public License along

with this program; if not, write to the Free Software Foundation, Inc., 59

Temple Place, Suite 330, Boston, MA 02111-1307 USA

Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this when it

starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author Gnomovision comes

with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free

software, and you are welcome to redistribute it under certain conditions;

type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate parts

of the General Public License. Of course, the commands you use may be called

something other than `show w' and `show c'; they could even be mouse-clicks or

menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or your school,

if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a

sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest

in the program `Gnomovision' (which makes passes at compilers)

written by James Hacker.

signature of Ty Coon, 1 April 1989

Ty Coon, President of Vice

This General Public License does not permit incorporating your program into

proprietary programs. If your program is a subroutine library, you may consider

it more useful to permit linking proprietary applications with the library. If

this is what you want to do, use the GNU Library General Public License instead

of this License.

Classpath is distributed under the terms of the GNU General Public License with

the following clarification and special exception.

Linking this library statically or dynamically with other modules is making a

combined work based on this library. Thus, the terms and conditions of the GNU

General Public License cover the whole combination.

As a special exception, the copyright holders of this library give you permission

to link this library with independent modules to produce an executable,

regardless of the license terms of these independent modules, and to copy and

distribute the resulting executable under terms of your choice, provided that you

also meet, for each linked independent module, the terms and conditions of the

license of that module. An independent module is a module which is not derived

from or based on this library. If you modify this library, you may extend this

exception to your version of the library, but you are not obligated to do so. If

you do not wish to do so, delete this exception statement from your version.

As such, it can be used to run, create and distribute a large class of

applications and applets. When GNU Classpath is used unmodified as the core class

library for a virtual machine, compiler for the java languge, or for a program

written in the java programming language it does not affect the licensing for

distributing those programs directly.

---

GNU General Public License v3.0 only

(gzip 1.10, nplan 0.106.1)

"This program is free software: you can redistribute it and/or modify it under

the terms of version 3 of the GNU General Public License as published by the Free

Software Foundation."

GNU GENERAL PUBLIC LICENSE

==========================

Version 3,  29 June 2007

Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>

Everyone is permitted to copy and distribute verbatim copies of this license

document, but changing it is not allowed.

Preamble

The GNU General Public License is a free, copyleft license for software and other

kinds of works.

The licenses for most software and other practical works are designed to take

away your freedom to share and change the works. By contrast, the GNU General

Public License is intended to guarantee your freedom to share and change all

versions of a program--to make sure it remains free software for all its users.

We, the Free Software Foundation, use the GNU General Public License for most of

our software; it applies also to any other work released this way by its authors.

You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our

General Public Licenses are designed to make sure that you have the freedom to

distribute copies of free software (and charge for them if you wish), that you

receive source code or can get it if you want it, that you can change the

software or use pieces of it in new free programs, and that you know you can do

these things.

To protect your rights, we need to prevent others from denying you these rights

or asking you to surrender the rights. Therefore, you have certain

responsibilities if you distribute copies of the software, or if you modify it:

responsibilities to respect the freedom of others.

For example, if you distribute copies of such a program, whether gratis or for a

fee, you must pass on to the recipients the same freedoms that you received. You

must make sure that they, too, receive or can get the source code. And you must

show them these terms so they know their rights.

Developers that use the GNU GPL protect your rights with two steps: (1) assert

copyright on the software, and (2) offer you this License giving you legal

permission to copy, distribute and/or modify it.

For the developers' and authors' protection, the GPL clearly explains that there

is no warranty for this free software. For both users' and authors' sake, the GPL

requires that modified versions be marked as changed, so that their problems will

not be attributed erroneously to authors of previous versions.

Some devices are designed to deny users access to install or run modified

versions of the software inside them, although the manufacturer can do so. This

is fundamentally incompatible with the aim of protecting users' freedom to change

the software. The systematic pattern of such abuse occurs in the area of products

for individuals to use, which is precisely where it is most unacceptable.

Therefore, we have designed this version of the GPL to prohibit the practice for

those products. If such problems arise substantially in other domains, we stand

ready to extend this provision to those domains in future versions of the GPL, as

needed to protect the freedom of users.

Finally, every program is threatened constantly by software patents. States

should not allow patents to restrict development and use of software on

general-purpose computers, but in those that do, we wish to avoid the special

danger that patents applied to a free program could make it effectively

proprietary. To prevent this, the GPL assures that patents cannot be used to

render the program non-free.

The precise terms and conditions for copying, distribution and modification

follow.

TERMS AND CONDITIONS

0. Definitions.

“This License” refers to version 3 of the GNU General Public License.

“Copyright” also means copyright-like laws that apply to other kinds of works,

such as semiconductor masks.

“The Program” refers to any copyrightable work licensed under this License. Each

licensee is addressed as “you”. “Licensees” and “recipients” may be individuals

or organizations.

To “modify” a work means to copy from or adapt all or part of the work in a

fashion requiring copyright permission, other than the making of an exact copy.

The resulting work is called a “modified version” of the earlier work or a work

“based on” the earlier work.

A “covered work” means either the unmodified Program or a work based on the

Program.

To “propagate” a work means to do anything with it that, without permission,

would make you directly or secondarily liable for infringement under applicable

copyright law, except executing it on a computer or modifying a private copy.

Propagation includes copying, distribution (with or without modification), making

available to the public, and in some countries other activities as well.

To “convey” a work means any kind of propagation that enables other parties to

make or receive copies. Mere interaction with a user through a computer network,

with no transfer of a copy, is not conveying.

An interactive user interface displays “Appropriate Legal Notices” to the extent

that it includes a convenient and prominently visible feature that (1) displays

an appropriate copyright notice, and (2) tells the user that there is no warranty

for the work (except to the extent that warranties are provided), that licensees

may convey the work under this License, and how to view a copy of this License.

If the interface presents a list of user commands or options, such as a menu, a

prominent item in the list meets this criterion.

1. Source Code.

The “source code” for a work means the preferred form of the work for making

modifications to it. “Object code” means any non-source form of a work.

A “Standard Interface” means an interface that either is an official standard

defined by a recognized standards body, or, in the case of interfaces specified

for a particular programming language, one that is widely used among developers

working in that language.

The “System Libraries” of an executable work include anything, other than the

work as a whole, that (a) is included in the normal form of packaging a Major

Component, but which is not part of that Major Component, and (b) serves only to

enable use of the work with that Major Component, or to implement a Standard

Interface for which an implementation is available to the public in source code

form. A “Major Component”, in this context, means a major essential component

(kernel, window system, and so on) of the specific operating system (if any) on

which the executable work runs, or a compiler used to produce the work, or an

object code interpreter used to run it.

The “Corresponding Source” for a work in object code form means all the source

code needed to generate, install, and (for an executable work) run the object

code and to modify the work, including scripts to control those activities.

However, it does not include the work's System Libraries, or general-purpose

tools or generally available free programs which are used unmodified in

performing those activities but which are not part of the work. For example,

Corresponding Source includes interface definition files associated with source

files for the work, and the source code for shared libraries and dynamically

linked subprograms that the work is specifically designed to require, such as by

intimate data communication or control flow between those subprograms and other

parts of the work.

The Corresponding Source need not include anything that users can regenerate

automatically from other parts of the Corresponding Source.

The Corresponding Source for a work in source code form is that same work.

2. Basic Permissions.

All rights granted under this License are granted for the term of copyright on

the Program, and are irrevocable provided the stated conditions are met. This

License explicitly affirms your unlimited permission to run the unmodified

Program. The output from running a covered work is covered by this License only

if the output, given its content, constitutes a covered work. This License

acknowledges your rights of fair use or other equivalent, as provided by

copyright law.

You may make, run and propagate covered works that you do not convey, without

conditions so long as your license otherwise remains in force. You may convey

covered works to others for the sole purpose of having them make modifications

exclusively for you, or provide you with facilities for running those works,

provided that you comply with the terms of this License in conveying all material

for which you do not control copyright. Those thus making or running the covered

works for you must do so exclusively on your behalf, under your direction and

control, on terms that prohibit them from making any copies of your copyrighted

material outside their relationship with you.

Conveying under any other circumstances is permitted solely under the conditions

stated below. Sublicensing is not allowed; section 10 makes it unnecessary.

3. Protecting Users' Legal Rights From Anti-Circumvention Law.

No covered work shall be deemed part of an effective technological measure under

any applicable law fulfilling obligations under article 11 of the WIPO copyright

treaty adopted on 20 December 1996, or similar laws prohibiting or restricting

circumvention of such measures.

When you convey a covered work, you waive any legal power to forbid circumvention

of technological measures to the extent such circumvention is effected by

exercising rights under this License with respect to the covered work, and you

disclaim any intention to limit operation or modification of the work as a means

of enforcing, against the work's users, your or third parties' legal rights to

forbid circumvention of technological measures.

4. Conveying Verbatim Copies.

You may convey verbatim copies of the Program's source code as you receive it, in

any medium, provided that you conspicuously and appropriately publish on each

copy an appropriate copyright notice; keep intact all notices stating that this

License and any non-permissive terms added in accord with section 7 apply to the

code; keep intact all notices of the absence of any warranty; and give all

recipients a copy of this License along with the Program.

You may charge any price or no price for each copy that you convey, and you may

offer support or warranty protection for a fee.

5. Conveying Modified Source Versions.

You may convey a work based on the Program, or the modifications to produce it

from the Program, in the form of source code under the terms of section 4,

provided that you also meet all of these conditions:

* a) The work must carry prominent notices stating that you modified it, and

giving a relevant date.

* b) The work must carry prominent notices stating that it is released under

this License and any conditions added under section 7. This requirement

modifies the requirement in section 4 to “keep intact all notices”.

* c) You must license the entire work, as a whole, under this License to anyone

who comes into possession of a copy. This License will therefore apply, along

with any applicable section 7 additional terms, to the whole of the work, and

all its parts, regardless of how they are packaged. This License gives no

permission to license the work in any other way, but it does not invalidate

such permission if you have separately received it.

* d) If the work has interactive user interfaces, each must display Appropriate

Legal Notices; however, if the Program has interactive interfaces that do not

display Appropriate Legal Notices, your work need not make them do so.

A compilation of a covered work with other separate and independent works, which

are not by their nature extensions of the covered work, and which are not

combined with it such as to form a larger program, in or on a volume of a storage

or distribution medium, is called an “aggregate” if the compilation and its

resulting copyright are not used to limit the access or legal rights of the

compilation's users beyond what the individual works permit. Inclusion of a

covered work in an aggregate does not cause this License to apply to the other

parts of the aggregate.

6. Conveying Non-Source Forms.

You may convey a covered work in object code form under the terms of sections 4

and 5, provided that you also convey the machine-readable Corresponding Source

under the terms of this License, in one of these ways:

* a) Convey the object code in, or embodied in, a physical product (including a

physical distribution medium), accompanied by the Corresponding Source fixed

on a durable physical medium customarily used for software interchange.

* b) Convey the object code in, or embodied in, a physical product (including a

physical distribution medium), accompanied by a written offer, valid for at

least three years and valid for as long as you offer spare parts or customer

support for that product model, to give anyone who possesses the object code

either (1) a copy of the Corresponding Source for all the software in the

product that is covered by this License, on a durable physical medium

customarily used for software interchange, for a price no more than your

reasonable cost of physically performing this conveying of source, or (2)

access to copy the Corresponding Source from a network server at no charge.

* c) Convey individual copies of the object code with a copy of the written

offer to provide the Corresponding Source. This alternative is allowed only

occasionally and noncommercially, and only if you received the object code

with such an offer, in accord with subsection 6b.

* d) Convey the object code by offering access from a designated place (gratis

or for a charge), and offer equivalent access to the Corresponding Source in

the same way through the same place at no further charge. You need not

require recipients to copy the Corresponding Source along with the object

code. If the place to copy the object code is a network server, the

Corresponding Source may be on a different server (operated by you or a third

party) that supports equivalent copying facilities, provided you maintain

clear directions next to the object code saying where to find the

Corresponding Source. Regardless of what server hosts the Corresponding

Source, you remain obligated to ensure that it is available for as long as

needed to satisfy these requirements.

* e) Convey the object code using peer-to-peer transmission, provided you

inform other peers where the object code and Corresponding Source of the work

are being offered to the general public at no charge under subsection 6d.

A separable portion of the object code, whose source code is excluded from the

Corresponding Source as a System Library, need not be included in conveying the

object code work.

A “User Product” is either (1) a “consumer product”, which means any tangible

personal property which is normally used for personal, family, or household

purposes, or (2) anything designed or sold for incorporation into a dwelling. In

determining whether a product is a consumer product, doubtful cases shall be

resolved in favor of coverage. For a particular product received by a particular

user, “normally used” refers to a typical or common use of that class of product,

regardless of the status of the particular user or of the way in which the

particular user actually uses, or expects or is expected to use, the product. A

product is a consumer product regardless of whether the product has substantial

commercial, industrial or non-consumer uses, unless such uses represent the only

significant mode of use of the product.

“Installation Information” for a User Product means any methods, procedures,

authorization keys, or other information required to install and execute modified

versions of a covered work in that User Product from a modified version of its

Corresponding Source. The information must suffice to ensure that the continued

functioning of the modified object code is in no case prevented or interfered

with solely because modification has been made.

If you convey an object code work under this section in, or with, or specifically

for use in, a User Product, and the conveying occurs as part of a transaction in

which the right of possession and use of the User Product is transferred to the

recipient in perpetuity or for a fixed term (regardless of how the transaction is

characterized), the Corresponding Source conveyed under this section must be

accompanied by the Installation Information. But this requirement does not apply

if neither you nor any third party retains the ability to install modified object

code on the User Product (for example, the work has been installed in ROM).

The requirement to provide Installation Information does not include a

requirement to continue to provide support service, warranty, or updates for a

work that has been modified or installed by the recipient, or for the User

Product in which it has been modified or installed. Access to a network may be

denied when the modification itself materially and adversely affects the

operation of the network or violates the rules and protocols for communication

across the network.

Corresponding Source conveyed, and Installation Information provided, in accord

with this section must be in a format that is publicly documented (and with an

implementation available to the public in source code form), and must require no

special password or key for unpacking, reading or copying.

7. Additional Terms.

“Additional permissions” are terms that supplement the terms of this License by

making exceptions from one or more of its conditions. Additional permissions that

are applicable to the entire Program shall be treated as though they were

included in this License, to the extent that they are valid under applicable law.

If additional permissions apply only to part of the Program, that part may be

used separately under those permissions, but the entire Program remains governed

by this License without regard to the additional permissions.

When you convey a copy of a covered work, you may at your option remove any

additional permissions from that copy, or from any part of it. (Additional

permissions may be written to require their own removal in certain cases when you

modify the work.) You may place additional permissions on material, added by you

to a covered work, for which you have or can give appropriate copyright

permission.

Notwithstanding any other provision of this License, for material you add to a

covered work, you may (if authorized by the copyright holders of that material)

supplement the terms of this License with terms:

* a) Disclaiming warranty or limiting liability differently from the terms of

sections 15 and 16 of this License; or

* b) Requiring preservation of specified reasonable legal notices or author

attributions in that material or in the Appropriate Legal Notices displayed

by works containing it; or

* c) Prohibiting misrepresentation of the origin of that material, or requiring

that modified versions of such material be marked in reasonable ways as

different from the original version; or

* d) Limiting the use for publicity purposes of names of licensors or authors

of the material; or

* e) Declining to grant rights under trademark law for use of some trade names,

trademarks, or service marks; or

* f) Requiring indemnification of licensors and authors of that material by

anyone who conveys the material (or modified versions of it) with contractual

assumptions of liability to the recipient, for any liability that these

contractual assumptions directly impose on those licensors and authors.

All other non-permissive additional terms are considered “further restrictions”

within the meaning of section 10. If the Program as you received it, or any part

of it, contains a notice stating that it is governed by this License along with a

term that is a further restriction, you may remove that term. If a license

document contains a further restriction but permits relicensing or conveying

under this License, you may add to a covered work material governed by the terms

of that license document, provided that the further restriction does not survive

such relicensing or conveying.

If you add terms to a covered work in accord with this section, you must place,

in the relevant source files, a statement of the additional terms that apply to

those files, or a notice indicating where to find the applicable terms.

Additional terms, permissive or non-permissive, may be stated in the form of a

separately written license, or stated as exceptions; the above requirements apply

either way.

8. Termination.

You may not propagate or modify a covered work except as expressly provided under

this License. Any attempt otherwise to propagate or modify it is void, and will

automatically terminate your rights under this License (including any patent

licenses granted under the third paragraph of section 11).

However, if you cease all violation of this License, then your license from a

particular copyright holder is reinstated (a) provisionally, unless and until the

copyright holder explicitly and finally terminates your license, and (b)

permanently, if the copyright holder fails to notify you of the violation by some

reasonable means prior to 60 days after the cessation.

Moreover, your license from a particular copyright holder is reinstated

permanently if the copyright holder notifies you of the violation by some

reasonable means, this is the first time you have received notice of violation of

this License (for any work) from that copyright holder, and you cure the

violation prior to 30 days after your receipt of the notice.

Termination of your rights under this section does not terminate the licenses of

parties who have received copies or rights from you under this License. If your

rights have been terminated and not permanently reinstated, you do not qualify to

receive new licenses for the same material under section 10.

9. Acceptance Not Required for Having Copies.

You are not required to accept this License in order to receive or run a copy of

the Program. Ancillary propagation of a covered work occurring solely as a

consequence of using peer-to-peer transmission to receive a copy likewise does

not require acceptance. However, nothing other than this License grants you

permission to propagate or modify any covered work. These actions infringe

copyright if you do not accept this License. Therefore, by modifying or

propagating a covered work, you indicate your acceptance of this License to do

so.

10. Automatic Licensing of Downstream Recipients.

Each time you convey a covered work, the recipient automatically receives a

license from the original licensors, to run, modify and propagate that work,

subject to this License. You are not responsible for enforcing compliance by

third parties with this License.

An “entity transaction” is a transaction transferring control of an organization,

or substantially all assets of one, or subdividing an organization, or merging

organizations. If propagation of a covered work results from an entity

transaction, each party to that transaction who receives a copy of the work also

receives whatever licenses to the work the party's predecessor in interest had or

could give under the previous paragraph, plus a right to possession of the

Corresponding Source of the work from the predecessor in interest, if the

predecessor has it or can get it with reasonable efforts.

You may not impose any further restrictions on the exercise of the rights granted

or affirmed under this License. For example, you may not impose a license fee,

royalty, or other charge for exercise of rights granted under this License, and

you may not initiate litigation (including a cross-claim or counterclaim in a

lawsuit) alleging that any patent claim is infringed by making, using, selling,

offering for sale, or importing the Program or any portion of it.

11. Patents.

A “contributor” is a copyright holder who authorizes use under this License of

the Program or a work on which the Program is based. The work thus licensed is

called the contributor's “contributor version”.

A contributor's “essential patent claims” are all patent claims owned or

controlled by the contributor, whether already acquired or hereafter acquired,

that would be infringed by some manner, permitted by this License, of making,

using, or selling its contributor version, but do not include claims that would

be infringed only as a consequence of further modification of the contributor

version. For purposes of this definition, “control” includes the right to grant

patent sublicenses in a manner consistent with the requirements of this License.

Each contributor grants you a non-exclusive, worldwide, royalty-free patent

license under the contributor's essential patent claims, to make, use, sell,

offer for sale, import and otherwise run, modify and propagate the contents of

its contributor version.

In the following three paragraphs, a “patent license” is any express agreement or

commitment, however denominated, not to enforce a patent (such as an express

permission to practice a patent or covenant not to sue for patent infringement).

To “grant” such a patent license to a party means to make such an agreement or

commitment not to enforce a patent against the party.

If you convey a covered work, knowingly relying on a patent license, and the

Corresponding Source of the work is not available for anyone to copy, free of

charge and under the terms of this License, through a publicly available network

server or other readily accessible means, then you must either (1) cause the

Corresponding Source to be so available, or (2) arrange to deprive yourself of

the benefit of the patent license for this particular work, or (3) arrange, in a

manner consistent with the requirements of this License, to extend the patent

license to downstream recipients. “Knowingly relying” means you have actual

knowledge that, but for the patent license, your conveying the covered work in a

country, or your recipient's use of the covered work in a country, would infringe

one or more identifiable patents in that country that you have reason to believe

are valid.

If, pursuant to or in connection with a single transaction or arrangement, you

convey, or propagate by procuring conveyance of, a covered work, and grant a

patent license to some of the parties receiving the covered work authorizing them

to use, propagate, modify or convey a specific copy of the covered work, then the

patent license you grant is automatically extended to all recipients of the

covered work and works based on it.

A patent license is “discriminatory” if it does not include within the scope of

its coverage, prohibits the exercise of, or is conditioned on the non-exercise of

one or more of the rights that are specifically granted under this License. You

may not convey a covered work if you are a party to an arrangement with a third

party that is in the business of distributing software, under which you make

payment to the third party based on the extent of your activity of conveying the

work, and under which the third party grants, to any of the parties who would

receive the covered work from you, a discriminatory patent license (a) in

connection with copies of the covered work conveyed by you (or copies made from

those copies), or (b) primarily for and in connection with specific products or

compilations that contain the covered work, unless you entered into that

arrangement, or that patent license was granted, prior to 28 March 2007.

Nothing in this License shall be construed as excluding or limiting any implied

license or other defenses to infringement that may otherwise be available to you

under applicable patent law.

12. No Surrender of Others' Freedom.

If conditions are imposed on you (whether by court order, agreement or otherwise)

that contradict the conditions of this License, they do not excuse you from the

conditions of this License. If you cannot convey a covered work so as to satisfy

simultaneously your obligations under this License and any other pertinent

obligations, then as a consequence you may not convey it at all. For example, if

you agree to terms that obligate you to collect a royalty for further conveying

from those to whom you convey the Program, the only way you could satisfy both

those terms and this License would be to refrain entirely from conveying the

Program.

13. Use with the GNU Affero General Public License.

Notwithstanding any other provision of this License, you have permission to link

or combine any covered work with a work licensed under version 3 of the GNU

Affero General Public License into a single combined work, and to convey the

resulting work. The terms of this License will continue to apply to the part

which is the covered work, but the special requirements of the GNU Affero General

Public License, section 13, concerning interaction through a network will apply

to the combination as such.

14. Revised Versions of this License.

The Free Software Foundation may publish revised and/or new versions of the GNU

General Public License from time to time. Such new versions will be similar in

spirit to the present version, but may differ in detail to address new problems

or concerns.

Each version is given a distinguishing version number. If the Program specifies

that a certain numbered version of the GNU General Public License “or any later

version” applies to it, you have the option of following the terms and conditions

either of that numbered version or of any later version published by the Free

Software Foundation. If the Program does not specify a version number of the GNU

General Public License, you may choose any version ever published by the Free

Software Foundation.

If the Program specifies that a proxy can decide which future versions of the GNU

General Public License can be used, that proxy's public statement of acceptance

of a version permanently authorizes you to choose that version for the Program.

Later license versions may give you additional or different permissions. However,

no additional obligations are imposed on any author or copyright holder as a

result of your choosing to follow a later version.

15. Disclaimer of Warranty.

THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.

EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER

PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE

QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE

DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

16. Limitation of Liability.

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY

COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS

PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE

THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED

INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE

PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

17. Interpretation of Sections 15 and 16.

If the disclaimer of warranty and limitation of liability provided above cannot

be given local legal effect according to their terms, reviewing courts shall

apply local law that most closely approximates an absolute waiver of all civil

liability in connection with the Program, unless a warranty or assumption of

liability accompanies a copy of the Program in return for a fee.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use

to the public, the best way to achieve this is to make it free software which

everyone can redistribute and change under these terms.

To do so, attach the following notices to the program. It is safest to attach

them to the start of each source file to most effectively state the exclusion of

warranty; and each file should have at least the “copyright” line and a pointer

to where the full notice is found.

<one line to give the program's name and a brief idea of what it

does.>

Copyright (C) <year> <name of author>

This program is free software: you can redistribute it and/or modify

it under the terms of the GNU General Public License as published by

the Free Software Foundation, either version 3 of the License, or

(at your option) any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this program. If not, see <http://www.gnu.org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

If the program does terminal interaction, make it output a short notice like this

when it starts in an interactive mode:

<program> Copyright (C) <year> <name of author>

This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.

This is free software, and you are welcome to redistribute it

under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate parts

of the General Public License. Of course, your program's commands might be

different; for a GUI interface, you would use an “about box”.

You should also get your employer (if you work as a programmer) or school, if

any, to sign a “copyright disclaimer” for the program, if necessary. For more

information on this, and how to apply and follow the GNU GPL, see

<http://www.gnu.org/licenses/>.

The GNU General Public License does not permit incorporating your program into

proprietary programs. If your program is a subroutine library, you may consider

it more useful to permit linking proprietary applications with the library. If

this is what you want to do, use the GNU Lesser General Public License instead of

this License. But first, please read

<http://www.gnu.org/philosophy/why-not-lgpl.html>.

---

GNU General Public License v3.0 or later

(Debian 1.215, gettext 0.21, glusterfs-resource-agents 10.2, GNU Compiler Collection 12.3.0+git1204, GNU GRUB 2.06, GNU nano 6.2, GnuPG 2.2.29, IO 1.45, linux-firmware 20220913)

GNU GENERAL PUBLIC LICENSE

==========================

Version 3,  29 June 2007

Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>

Everyone is permitted to copy and distribute verbatim copies of this license

document, but changing it is not allowed.

Preamble

The GNU General Public License is a free, copyleft license for software and other

kinds of works.

The licenses for most software and other practical works are designed to take

away your freedom to share and change the works. By contrast, the GNU General

Public License is intended to guarantee your freedom to share and change all

versions of a program--to make sure it remains free software for all its users.

We, the Free Software Foundation, use the GNU General Public License for most of

our software; it applies also to any other work released this way by its authors.

You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our

General Public Licenses are designed to make sure that you have the freedom to

distribute copies of free software (and charge for them if you wish), that you

receive source code or can get it if you want it, that you can change the

software or use pieces of it in new free programs, and that you know you can do

these things.

To protect your rights, we need to prevent others from denying you these rights

or asking you to surrender the rights. Therefore, you have certain

responsibilities if you distribute copies of the software, or if you modify it:

responsibilities to respect the freedom of others.

For example, if you distribute copies of such a program, whether gratis or for a

fee, you must pass on to the recipients the same freedoms that you received. You

must make sure that they, too, receive or can get the source code. And you must

show them these terms so they know their rights.

Developers that use the GNU GPL protect your rights with two steps: (1) assert

copyright on the software, and (2) offer you this License giving you legal

permission to copy, distribute and/or modify it.

For the developers' and authors' protection, the GPL clearly explains that there

is no warranty for this free software. For both users' and authors' sake, the GPL

requires that modified versions be marked as changed, so that their problems will

not be attributed erroneously to authors of previous versions.

Some devices are designed to deny users access to install or run modified

versions of the software inside them, although the manufacturer can do so. This

is fundamentally incompatible with the aim of protecting users' freedom to change

the software. The systematic pattern of such abuse occurs in the area of products

for individuals to use, which is precisely where it is most unacceptable.

Therefore, we have designed this version of the GPL to prohibit the practice for

those products. If such problems arise substantially in other domains, we stand

ready to extend this provision to those domains in future versions of the GPL, as

needed to protect the freedom of users.

Finally, every program is threatened constantly by software patents. States

should not allow patents to restrict development and use of software on

general-purpose computers, but in those that do, we wish to avoid the special

danger that patents applied to a free program could make it effectively

proprietary. To prevent this, the GPL assures that patents cannot be used to

render the program non-free.

The precise terms and conditions for copying, distribution and modification

follow.

TERMS AND CONDITIONS

0. Definitions.

“This License” refers to version 3 of the GNU General Public License.

“Copyright” also means copyright-like laws that apply to other kinds of works,

such as semiconductor masks.

“The Program” refers to any copyrightable work licensed under this License. Each

licensee is addressed as “you”. “Licensees” and “recipients” may be individuals

or organizations.

To “modify” a work means to copy from or adapt all or part of the work in a

fashion requiring copyright permission, other than the making of an exact copy.

The resulting work is called a “modified version” of the earlier work or a work

“based on” the earlier work.

A “covered work” means either the unmodified Program or a work based on the

Program.

To “propagate” a work means to do anything with it that, without permission,

would make you directly or secondarily liable for infringement under applicable

copyright law, except executing it on a computer or modifying a private copy.

Propagation includes copying, distribution (with or without modification), making

available to the public, and in some countries other activities as well.

To “convey” a work means any kind of propagation that enables other parties to

make or receive copies. Mere interaction with a user through a computer network,

with no transfer of a copy, is not conveying.

An interactive user interface displays “Appropriate Legal Notices” to the extent

that it includes a convenient and prominently visible feature that (1) displays

an appropriate copyright notice, and (2) tells the user that there is no warranty

for the work (except to the extent that warranties are provided), that licensees

may convey the work under this License, and how to view a copy of this License.

If the interface presents a list of user commands or options, such as a menu, a

prominent item in the list meets this criterion.

1. Source Code.

The “source code” for a work means the preferred form of the work for making

modifications to it. “Object code” means any non-source form of a work.

A “Standard Interface” means an interface that either is an official standard

defined by a recognized standards body, or, in the case of interfaces specified

for a particular programming language, one that is widely used among developers

working in that language.

The “System Libraries” of an executable work include anything, other than the

work as a whole, that (a) is included in the normal form of packaging a Major

Component, but which is not part of that Major Component, and (b) serves only to

enable use of the work with that Major Component, or to implement a Standard

Interface for which an implementation is available to the public in source code

form. A “Major Component”, in this context, means a major essential component

(kernel, window system, and so on) of the specific operating system (if any) on

which the executable work runs, or a compiler used to produce the work, or an

object code interpreter used to run it.

The “Corresponding Source” for a work in object code form means all the source

code needed to generate, install, and (for an executable work) run the object

code and to modify the work, including scripts to control those activities.

However, it does not include the work's System Libraries, or general-purpose

tools or generally available free programs which are used unmodified in

performing those activities but which are not part of the work. For example,

Corresponding Source includes interface definition files associated with source

files for the work, and the source code for shared libraries and dynamically

linked subprograms that the work is specifically designed to require, such as by

intimate data communication or control flow between those subprograms and other

parts of the work.

The Corresponding Source need not include anything that users can regenerate

automatically from other parts of the Corresponding Source.

The Corresponding Source for a work in source code form is that same work.

2. Basic Permissions.

All rights granted under this License are granted for the term of copyright on

the Program, and are irrevocable provided the stated conditions are met. This

License explicitly affirms your unlimited permission to run the unmodified

Program. The output from running a covered work is covered by this License only

if the output, given its content, constitutes a covered work. This License

acknowledges your rights of fair use or other equivalent, as provided by

copyright law.

You may make, run and propagate covered works that you do not convey, without

conditions so long as your license otherwise remains in force. You may convey

covered works to others for the sole purpose of having them make modifications

exclusively for you, or provide you with facilities for running those works,

provided that you comply with the terms of this License in conveying all material

for which you do not control copyright. Those thus making or running the covered

works for you must do so exclusively on your behalf, under your direction and

control, on terms that prohibit them from making any copies of your copyrighted

material outside their relationship with you.

Conveying under any other circumstances is permitted solely under the conditions

stated below. Sublicensing is not allowed; section 10 makes it unnecessary.

3. Protecting Users' Legal Rights From Anti-Circumvention Law.

No covered work shall be deemed part of an effective technological measure under

any applicable law fulfilling obligations under article 11 of the WIPO copyright

treaty adopted on 20 December 1996, or similar laws prohibiting or restricting

circumvention of such measures.

When you convey a covered work, you waive any legal power to forbid circumvention

of technological measures to the extent such circumvention is effected by

exercising rights under this License with respect to the covered work, and you

disclaim any intention to limit operation or modification of the work as a means

of enforcing, against the work's users, your or third parties' legal rights to

forbid circumvention of technological measures.

4. Conveying Verbatim Copies.

You may convey verbatim copies of the Program's source code as you receive it, in

any medium, provided that you conspicuously and appropriately publish on each

copy an appropriate copyright notice; keep intact all notices stating that this

License and any non-permissive terms added in accord with section 7 apply to the

code; keep intact all notices of the absence of any warranty; and give all

recipients a copy of this License along with the Program.

You may charge any price or no price for each copy that you convey, and you may

offer support or warranty protection for a fee.

5. Conveying Modified Source Versions.

You may convey a work based on the Program, or the modifications to produce it

from the Program, in the form of source code under the terms of section 4,

provided that you also meet all of these conditions:

* a) The work must carry prominent notices stating that you modified it, and

giving a relevant date.

* b) The work must carry prominent notices stating that it is released under

this License and any conditions added under section 7. This requirement

modifies the requirement in section 4 to “keep intact all notices”.

* c) You must license the entire work, as a whole, under this License to anyone

who comes into possession of a copy. This License will therefore apply, along

with any applicable section 7 additional terms, to the whole of the work, and

all its parts, regardless of how they are packaged. This License gives no

permission to license the work in any other way, but it does not invalidate

such permission if you have separately received it.

* d) If the work has interactive user interfaces, each must display Appropriate

Legal Notices; however, if the Program has interactive interfaces that do not

display Appropriate Legal Notices, your work need not make them do so.

A compilation of a covered work with other separate and independent works, which

are not by their nature extensions of the covered work, and which are not

combined with it such as to form a larger program, in or on a volume of a storage

or distribution medium, is called an “aggregate” if the compilation and its

resulting copyright are not used to limit the access or legal rights of the

compilation's users beyond what the individual works permit. Inclusion of a

covered work in an aggregate does not cause this License to apply to the other

parts of the aggregate.

6. Conveying Non-Source Forms.

You may convey a covered work in object code form under the terms of sections 4

and 5, provided that you also convey the machine-readable Corresponding Source

under the terms of this License, in one of these ways:

* a) Convey the object code in, or embodied in, a physical product (including a

physical distribution medium), accompanied by the Corresponding Source fixed

on a durable physical medium customarily used for software interchange.

* b) Convey the object code in, or embodied in, a physical product (including a

physical distribution medium), accompanied by a written offer, valid for at

least three years and valid for as long as you offer spare parts or customer

support for that product model, to give anyone who possesses the object code

either (1) a copy of the Corresponding Source for all the software in the

product that is covered by this License, on a durable physical medium

customarily used for software interchange, for a price no more than your

reasonable cost of physically performing this conveying of source, or (2)

access to copy the Corresponding Source from a network server at no charge.

* c) Convey individual copies of the object code with a copy of the written

offer to provide the Corresponding Source. This alternative is allowed only

occasionally and noncommercially, and only if you received the object code

with such an offer, in accord with subsection 6b.

* d) Convey the object code by offering access from a designated place (gratis

or for a charge), and offer equivalent access to the Corresponding Source in

the same way through the same place at no further charge. You need not

require recipients to copy the Corresponding Source along with the object

code. If the place to copy the object code is a network server, the

Corresponding Source may be on a different server (operated by you or a third

party) that supports equivalent copying facilities, provided you maintain

clear directions next to the object code saying where to find the

Corresponding Source. Regardless of what server hosts the Corresponding

Source, you remain obligated to ensure that it is available for as long as

needed to satisfy these requirements.

* e) Convey the object code using peer-to-peer transmission, provided you

inform other peers where the object code and Corresponding Source of the work

are being offered to the general public at no charge under subsection 6d.

A separable portion of the object code, whose source code is excluded from the

Corresponding Source as a System Library, need not be included in conveying the

object code work.

A “User Product” is either (1) a “consumer product”, which means any tangible

personal property which is normally used for personal, family, or household

purposes, or (2) anything designed or sold for incorporation into a dwelling. In

determining whether a product is a consumer product, doubtful cases shall be

resolved in favor of coverage. For a particular product received by a particular

user, “normally used” refers to a typical or common use of that class of product,

regardless of the status of the particular user or of the way in which the

particular user actually uses, or expects or is expected to use, the product. A

product is a consumer product regardless of whether the product has substantial

commercial, industrial or non-consumer uses, unless such uses represent the only

significant mode of use of the product.

“Installation Information” for a User Product means any methods, procedures,

authorization keys, or other information required to install and execute modified

versions of a covered work in that User Product from a modified version of its

Corresponding Source. The information must suffice to ensure that the continued

functioning of the modified object code is in no case prevented or interfered

with solely because modification has been made.

If you convey an object code work under this section in, or with, or specifically

for use in, a User Product, and the conveying occurs as part of a transaction in

which the right of possession and use of the User Product is transferred to the

recipient in perpetuity or for a fixed term (regardless of how the transaction is

characterized), the Corresponding Source conveyed under this section must be

accompanied by the Installation Information. But this requirement does not apply

if neither you nor any third party retains the ability to install modified object

code on the User Product (for example, the work has been installed in ROM).

The requirement to provide Installation Information does not include a

requirement to continue to provide support service, warranty, or updates for a

work that has been modified or installed by the recipient, or for the User

Product in which it has been modified or installed. Access to a network may be

denied when the modification itself materially and adversely affects the

operation of the network or violates the rules and protocols for communication

across the network.

Corresponding Source conveyed, and Installation Information provided, in accord

with this section must be in a format that is publicly documented (and with an

implementation available to the public in source code form), and must require no

special password or key for unpacking, reading or copying.

7. Additional Terms.

“Additional permissions” are terms that supplement the terms of this License by

making exceptions from one or more of its conditions. Additional permissions that

are applicable to the entire Program shall be treated as though they were

included in this License, to the extent that they are valid under applicable law.

If additional permissions apply only to part of the Program, that part may be

used separately under those permissions, but the entire Program remains governed

by this License without regard to the additional permissions.

When you convey a copy of a covered work, you may at your option remove any

additional permissions from that copy, or from any part of it. (Additional

permissions may be written to require their own removal in certain cases when you

modify the work.) You may place additional permissions on material, added by you

to a covered work, for which you have or can give appropriate copyright

permission.

Notwithstanding any other provision of this License, for material you add to a

covered work, you may (if authorized by the copyright holders of that material)

supplement the terms of this License with terms:

* a) Disclaiming warranty or limiting liability differently from the terms of

sections 15 and 16 of this License; or

* b) Requiring preservation of specified reasonable legal notices or author

attributions in that material or in the Appropriate Legal Notices displayed

by works containing it; or

* c) Prohibiting misrepresentation of the origin of that material, or requiring

that modified versions of such material be marked in reasonable ways as

different from the original version; or

* d) Limiting the use for publicity purposes of names of licensors or authors

of the material; or

* e) Declining to grant rights under trademark law for use of some trade names,

trademarks, or service marks; or

* f) Requiring indemnification of licensors and authors of that material by

anyone who conveys the material (or modified versions of it) with contractual

assumptions of liability to the recipient, for any liability that these

contractual assumptions directly impose on those licensors and authors.

All other non-permissive additional terms are considered “further restrictions”

within the meaning of section 10. If the Program as you received it, or any part

of it, contains a notice stating that it is governed by this License along with a

term that is a further restriction, you may remove that term. If a license

document contains a further restriction but permits relicensing or conveying

under this License, you may add to a covered work material governed by the terms

of that license document, provided that the further restriction does not survive

such relicensing or conveying.

If you add terms to a covered work in accord with this section, you must place,

in the relevant source files, a statement of the additional terms that apply to

those files, or a notice indicating where to find the applicable terms.

Additional terms, permissive or non-permissive, may be stated in the form of a

separately written license, or stated as exceptions; the above requirements apply

either way.

8. Termination.

You may not propagate or modify a covered work except as expressly provided under

this License. Any attempt otherwise to propagate or modify it is void, and will

automatically terminate your rights under this License (including any patent

licenses granted under the third paragraph of section 11).

However, if you cease all violation of this License, then your license from a

particular copyright holder is reinstated (a) provisionally, unless and until the

copyright holder explicitly and finally terminates your license, and (b)

permanently, if the copyright holder fails to notify you of the violation by some

reasonable means prior to 60 days after the cessation.

Moreover, your license from a particular copyright holder is reinstated

permanently if the copyright holder notifies you of the violation by some

reasonable means, this is the first time you have received notice of violation of

this License (for any work) from that copyright holder, and you cure the

violation prior to 30 days after your receipt of the notice.

Termination of your rights under this section does not terminate the licenses of

parties who have received copies or rights from you under this License. If your

rights have been terminated and not permanently reinstated, you do not qualify to

receive new licenses for the same material under section 10.

9. Acceptance Not Required for Having Copies.

You are not required to accept this License in order to receive or run a copy of

the Program. Ancillary propagation of a covered work occurring solely as a

consequence of using peer-to-peer transmission to receive a copy likewise does

not require acceptance. However, nothing other than this License grants you

permission to propagate or modify any covered work. These actions infringe

copyright if you do not accept this License. Therefore, by modifying or

propagating a covered work, you indicate your acceptance of this License to do

so.

10. Automatic Licensing of Downstream Recipients.

Each time you convey a covered work, the recipient automatically receives a

license from the original licensors, to run, modify and propagate that work,

subject to this License. You are not responsible for enforcing compliance by

third parties with this License.

An “entity transaction” is a transaction transferring control of an organization,

or substantially all assets of one, or subdividing an organization, or merging

organizations. If propagation of a covered work results from an entity

transaction, each party to that transaction who receives a copy of the work also

receives whatever licenses to the work the party's predecessor in interest had or

could give under the previous paragraph, plus a right to possession of the

Corresponding Source of the work from the predecessor in interest, if the

predecessor has it or can get it with reasonable efforts.

You may not impose any further restrictions on the exercise of the rights granted

or affirmed under this License. For example, you may not impose a license fee,

royalty, or other charge for exercise of rights granted under this License, and

you may not initiate litigation (including a cross-claim or counterclaim in a

lawsuit) alleging that any patent claim is infringed by making, using, selling,

offering for sale, or importing the Program or any portion of it.

11. Patents.

A “contributor” is a copyright holder who authorizes use under this License of

the Program or a work on which the Program is based. The work thus licensed is

called the contributor's “contributor version”.

A contributor's “essential patent claims” are all patent claims owned or

controlled by the contributor, whether already acquired or hereafter acquired,

that would be infringed by some manner, permitted by this License, of making,

using, or selling its contributor version, but do not include claims that would

be infringed only as a consequence of further modification of the contributor

version. For purposes of this definition, “control” includes the right to grant

patent sublicenses in a manner consistent with the requirements of this License.

Each contributor grants you a non-exclusive, worldwide, royalty-free patent

license under the contributor's essential patent claims, to make, use, sell,

offer for sale, import and otherwise run, modify and propagate the contents of

its contributor version.

In the following three paragraphs, a “patent license” is any express agreement or

commitment, however denominated, not to enforce a patent (such as an express

permission to practice a patent or covenant not to sue for patent infringement).

To “grant” such a patent license to a party means to make such an agreement or

commitment not to enforce a patent against the party.

If you convey a covered work, knowingly relying on a patent license, and the

Corresponding Source of the work is not available for anyone to copy, free of

charge and under the terms of this License, through a publicly available network

server or other readily accessible means, then you must either (1) cause the

Corresponding Source to be so available, or (2) arrange to deprive yourself of

the benefit of the patent license for this particular work, or (3) arrange, in a

manner consistent with the requirements of this License, to extend the patent

license to downstream recipients. “Knowingly relying” means you have actual

knowledge that, but for the patent license, your conveying the covered work in a

country, or your recipient's use of the covered work in a country, would infringe

one or more identifiable patents in that country that you have reason to believe

are valid.

If, pursuant to or in connection with a single transaction or arrangement, you

convey, or propagate by procuring conveyance of, a covered work, and grant a

patent license to some of the parties receiving the covered work authorizing them

to use, propagate, modify or convey a specific copy of the covered work, then the

patent license you grant is automatically extended to all recipients of the

covered work and works based on it.

A patent license is “discriminatory” if it does not include within the scope of

its coverage, prohibits the exercise of, or is conditioned on the non-exercise of

one or more of the rights that are specifically granted under this License. You

may not convey a covered work if you are a party to an arrangement with a third

party that is in the business of distributing software, under which you make

payment to the third party based on the extent of your activity of conveying the

work, and under which the third party grants, to any of the parties who would

receive the covered work from you, a discriminatory patent license (a) in

connection with copies of the covered work conveyed by you (or copies made from

those copies), or (b) primarily for and in connection with specific products or

compilations that contain the covered work, unless you entered into that

arrangement, or that patent license was granted, prior to 28 March 2007.

Nothing in this License shall be construed as excluding or limiting any implied

license or other defenses to infringement that may otherwise be available to you

under applicable patent law.

12. No Surrender of Others' Freedom.

If conditions are imposed on you (whether by court order, agreement or otherwise)

that contradict the conditions of this License, they do not excuse you from the

conditions of this License. If you cannot convey a covered work so as to satisfy

simultaneously your obligations under this License and any other pertinent

obligations, then as a consequence you may not convey it at all. For example, if

you agree to terms that obligate you to collect a royalty for further conveying

from those to whom you convey the Program, the only way you could satisfy both

those terms and this License would be to refrain entirely from conveying the

Program.

13. Use with the GNU Affero General Public License.

Notwithstanding any other provision of this License, you have permission to link

or combine any covered work with a work licensed under version 3 of the GNU

Affero General Public License into a single combined work, and to convey the

resulting work. The terms of this License will continue to apply to the part

which is the covered work, but the special requirements of the GNU Affero General

Public License, section 13, concerning interaction through a network will apply

to the combination as such.

14. Revised Versions of this License.

The Free Software Foundation may publish revised and/or new versions of the GNU

General Public License from time to time. Such new versions will be similar in

spirit to the present version, but may differ in detail to address new problems

or concerns.

Each version is given a distinguishing version number. If the Program specifies

that a certain numbered version of the GNU General Public License “or any later

version” applies to it, you have the option of following the terms and conditions

either of that numbered version or of any later version published by the Free

Software Foundation. If the Program does not specify a version number of the GNU

General Public License, you may choose any version ever published by the Free

Software Foundation.

If the Program specifies that a proxy can decide which future versions of the GNU

General Public License can be used, that proxy's public statement of acceptance

of a version permanently authorizes you to choose that version for the Program.

Later license versions may give you additional or different permissions. However,

no additional obligations are imposed on any author or copyright holder as a

result of your choosing to follow a later version.

15. Disclaimer of Warranty.

THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.

EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER

PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE

QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE

DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

16. Limitation of Liability.

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY

COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS

PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE

THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED

INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE

PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

17. Interpretation of Sections 15 and 16.

If the disclaimer of warranty and limitation of liability provided above cannot

be given local legal effect according to their terms, reviewing courts shall

apply local law that most closely approximates an absolute waiver of all civil

liability in connection with the Program, unless a warranty or assumption of

liability accompanies a copy of the Program in return for a fee.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use

to the public, the best way to achieve this is to make it free software which

everyone can redistribute and change under these terms.

To do so, attach the following notices to the program. It is safest to attach

them to the start of each source file to most effectively state the exclusion of

warranty; and each file should have at least the “copyright” line and a pointer

to where the full notice is found.

<one line to give the program's name and a brief idea of what it

does.>

Copyright (C) <year> <name of author>

This program is free software: you can redistribute it and/or modify

it under the terms of the GNU General Public License as published by

the Free Software Foundation, either version 3 of the License, or

(at your option) any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this program. If not, see <http://www.gnu.org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

If the program does terminal interaction, make it output a short notice like this

when it starts in an interactive mode:

<program> Copyright (C) <year> <name of author>

This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.

This is free software, and you are welcome to redistribute it

under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate parts

of the General Public License. Of course, your program's commands might be

different; for a GUI interface, you would use an “about box”.

You should also get your employer (if you work as a programmer) or school, if

any, to sign a “copyright disclaimer” for the program, if necessary. For more

information on this, and how to apply and follow the GNU GPL, see

<http://www.gnu.org/licenses/>.

The GNU General Public License does not permit incorporating your program into

proprietary programs. If your program is a subroutine library, you may consider

it more useful to permit linking proprietary applications with the library. If

this is what you want to do, use the GNU Lesser General Public License instead of

this License. But first, please read

<http://www.gnu.org/philosophy/why-not-lgpl.html>.

---

GNU Lesser General Public License v2.1 only

(avahi 0.8)

GNU Lesser General Public License Version 2.1 Only

--------------------------------------------------

"This library is free software; you can redistribute it and/or modify it under

the terms of the GNU Lesser General Public License as published by the Free

Software Foundation[,][;] version 2.1 of the License."

GNU Lesser General Public License

=================================

Version 2.1, February 1999

Copyright (C) 1991, 1999 Free Software Foundation, Inc.

59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

Everyone is permitted to copy and distribute verbatim copies

of this license document, but changing it is not allowed.

[This is the first released version of the Lesser GPL. It also counts

as the successor of the GNU Library Public License, version 2, hence

the version number 2.1.]

Preamble

--------

The licenses for most software are designed to take away your freedom to share

and change it. By contrast, the GNU General Public Licenses are intended to

guarantee your freedom to share and change free software--to make sure the

software is free for all its users.

This license, the Lesser General Public License, applies to some specially

designated software packages--typically libraries--of the Free Software

Foundation and other authors who decide to use it. You can use it too, but we

suggest you first think carefully about whether this license or the ordinary

General Public License is the better strategy to use in any particular case,

based on the explanations below.

When we speak of free software, we are referring to freedom of use, not price.

Our General Public Licenses are designed to make sure that you have the freedom

to distribute copies of free software (and charge for this service if you wish);

that you receive source code or can get it if you want it; that you can change

the software and use pieces of it in new free programs; and that you are informed

that you can do these things.

To protect your rights, we need to make restrictions that forbid distributors to

deny you these rights or to ask you to surrender these rights. These restrictions

translate to certain responsibilities for you if you distribute copies of the

library or if you modify it.

For example, if you distribute copies of the library, whether gratis or for a

fee, you must give the recipients all the rights that we gave you. You must make

sure that they, too, receive or can get the source code. If you link other code

with the library, you must provide complete object files to the recipients, so

that they can relink them with the library after making changes to the library

and recompiling it. And you must show them these terms so they know their rights.

We protect your rights with a two-step method: (1) we copyright the library, and

(2) we offer you this license, which gives you legal permission to copy,

distribute and/or modify the library.

To protect each distributor, we want to make it very clear that there is no

warranty for the free library. Also, if the library is modified by someone else

and passed on, the recipients should know that what they have is not the original

version, so that the original author's reputation will not be affected by

problems that might be introduced by others.

Finally, software patents pose a constant threat to the existence of any free

program. We wish to make sure that a company cannot effectively restrict the

users of a free program by obtaining a restrictive license from a patent holder.

Therefore, we insist that any patent license obtained for a version of the

library must be consistent with the full freedom of use specified in this

license.

Most GNU software, including some libraries, is covered by the ordinary GNU

General Public License. This license, the GNU Lesser General Public License,

applies to certain designated libraries, and is quite different from the ordinary

General Public License. We use this license for certain libraries in order to

permit linking those libraries into non-free programs.

When a program is linked with a library, whether statically or using a shared

library, the combination of the two is legally speaking a combined work, a

derivative of the original library. The ordinary General Public License therefore

permits such linking only if the entire combination fits its criteria of freedom.

The Lesser General Public License permits more lax criteria for linking other

code with the library.

We call this license the "Lesser" General Public License because it does Less to

protect the user's freedom than the ordinary General Public License. It also

provides other free software developers Less of an advantage over competing

non-free programs. These disadvantages are the reason we use the ordinary General

Public License for many libraries. However, the Lesser license provides

advantages in certain special circumstances.

For example, on rare occasions, there may be a special need to encourage the

widest possible use of a certain library, so that it becomes a de-facto standard.

To achieve this, non-free programs must be allowed to use the library. A more

frequent case is that a free library does the same job as widely used non-free

libraries. In this case, there is little to gain by limiting the free library to

free software only, so we use the Lesser General Public License.

In other cases, permission to use a particular library in non-free programs

enables a greater number of people to use a large body of free software. For

example, permission to use the GNU C Library in non-free programs enables many

more people to use the whole GNU operating system, as well as its variant, the

GNU/Linux operating system.

Although the Lesser General Public License is Less protective of the users'

freedom, it does ensure that the user of a program that is linked with the

Library has the freedom and the wherewithal to run that program using a modified

version of the Library.

The precise terms and conditions for copying, distribution and modification

follow. Pay close attention to the difference between a "work based on the

library" and a "work that uses the library". The former contains code derived

from the library, whereas the latter must be combined with the library in order

to run.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

---------------------------------------------------------------

0. This License Agreement applies to any software library or other program which

contains a notice placed by the copyright holder or other authorized party saying

it may be distributed under the terms of this Lesser General Public License (also

called "this License"). Each licensee is addressed as "you".

A "library" means a collection of software functions and/or data prepared so as

to be conveniently linked with application programs (which use some of those

functions and data) to form executables.

The "Library", below, refers to any such software library or work which has been

distributed under these terms. A "work based on the Library" means either the

Library or any derivative work under copyright law: that is to say, a work

containing the Library or a portion of it, either verbatim or with modifications

and/or translated straightforwardly into another language. (Hereinafter,

translation is included without limitation in the term "modification".)

"Source code" for a work means the preferred form of the work for making

modifications to it. For a library, complete source code means all the source

code for all modules it contains, plus any associated interface definition files,

plus the scripts used to control compilation and installation of the library.

Activities other than copying, distribution and modification are not covered by

this License; they are outside its scope. The act of running a program using the

Library is not restricted, and output from such a program is covered only if its

contents constitute a work based on the Library (independent of the use of the

Library in a tool for writing it). Whether that is true depends on what the

Library does and what the program that uses the Library does.

1. You may copy and distribute verbatim copies of the Library's complete source

code as you receive it, in any medium, provided that you conspicuously and

appropriately publish on each copy an appropriate copyright notice and disclaimer

of warranty; keep intact all the notices that refer to this License and to the

absence of any warranty; and distribute a copy of this License along with the

Library.

You may charge a fee for the physical act of transferring a copy, and you may at

your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Library or any portion of it, thus

forming a work based on the Library, and copy and distribute such modifications

or work under the terms of Section 1 above, provided that you also meet all of

these conditions:

a) The modified work must itself be a software library.

b) You must cause the files modified to carry prominent notices stating

that you changed the files and the date of any change.

c) You must cause the whole of the work to be licensed at no charge to all

third parties under the terms of this License.

d) If a facility in the modified Library refers to a function or a table of

data to be supplied by an application program that uses the facility, other

than as an argument passed when the facility is invoked, then you must make

a good faith effort to ensure that, in the event an application does not

supply such function or table, the facility still operates, and performs

whatever part of its purpose remains meaningful.

(For example, a function in a library to compute square roots has a purpose

that is entirely well-defined independent of the application. Therefore,

Subsection 2d requires that any application-supplied function or table used

by this function must be optional: if the application does not supply it,

the square root function must still compute square roots.)

These requirements apply to the modified work as a whole. If identifiable

sections of that work are not derived from the Library, and can be

reasonably considered independent and separate works in themselves, then

this License, and its terms, do not apply to those sections when you

distribute them as separate works. But when you distribute the same

sections as part of a whole which is a work based on the Library, the

distribution of the whole must be on the terms of this License, whose

permissions for other licensees extend to the entire whole, and thus to

each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your

rights to work written entirely by you; rather, the intent is to exercise

the right to control the distribution of derivative or collective works

based on the Library.

In addition, mere aggregation of another work not based on the Library with

the Library (or with a work based on the Library) on a volume of a storage

or distribution medium does not bring the other work under the scope of

this License.

3. You may opt to apply the terms of the ordinary GNU General Public License

instead of this License to a given copy of the Library. To do this, you must

alter all the notices that refer to this License, so that they refer to the

ordinary GNU General Public License, version 2, instead of to this License. (If a

newer version than version 2 of the ordinary GNU General Public License has

appeared, then you can specify that version instead if you wish.) Do not make any

other change in these notices.

Once this change is made in a given copy, it is irreversible for that copy, so

the ordinary GNU General Public License applies to all subsequent copies and

derivative works made from that copy.

This option is useful when you wish to copy part of the code of the Library into

a program that is not a library.

4. You may copy and distribute the Library (or a portion or derivative of it,

under Section 2) in object code or executable form under the terms of Sections 1

and 2 above provided that you accompany it with the complete corresponding

machine-readable source code, which must be distributed under the terms of

Sections 1 and 2 above on a medium customarily used for software interchange.

If distribution of object code is made by offering access to copy from a

designated place, then offering equivalent access to copy the source code from

the same place satisfies the requirement to distribute the source code, even

though third parties are not compelled to copy the source along with the object

code.

5. A program that contains no derivative of any portion of the Library, but is

designed to work with the Library by being compiled or linked with it, is called

a "work that uses the Library". Such a work, in isolation, is not a derivative

work of the Library, and therefore falls outside the scope of this License.

However, linking a "work that uses the Library" with the Library creates an

executable that is a derivative of the Library (because it contains portions of

the Library), rather than a "work that uses the library". The executable is

therefore covered by this License. Section 6 states terms for distribution of

such executables.

When a "work that uses the Library" uses material from a header file that is part

of the Library, the object code for the work may be a derivative work of the

Library even though the source code is not. Whether this is true is especially

significant if the work can be linked without the Library, or if the work is

itself a library. The threshold for this to be true is not precisely defined by

law.

If such an object file uses only numerical parameters, data structure layouts and

accessors, and small macros and small inline functions (ten lines or less in

length), then the use of the object file is unrestricted, regardless of whether

it is legally a derivative work. (Executables containing this object code plus

portions of the Library will still fall under Section 6.)

Otherwise, if the work is a derivative of the Library, you may distribute the

object code for the work under the terms of Section 6. Any executables containing

that work also fall under Section 6, whether or not they are linked directly with

the Library itself.

6. As an exception to the Sections above, you may also combine or link a "work

that uses the Library" with the Library to produce a work containing portions of

the Library, and distribute that work under terms of your choice, provided that

the terms permit modification of the work for the customer's own use and reverse

engineering for debugging such modifications.

You must give prominent notice with each copy of the work that the Library is

used in it and that the Library and its use are covered by this License. You must

supply a copy of this License. If the work during execution displays copyright

notices, you must include the copyright notice for the Library among them, as

well as a reference directing the user to the copy of this License. Also, you

must do one of these things:

a) Accompany the work with the complete corresponding machine-readable

source code for the Library including whatever changes were used in the

work (which must be distributed under Sections 1 and 2 above); and, if the

work is an executable linked with the Library, with the complete

machine-readable "work that uses the Library", as object code and/or source

code, so that the user can modify the Library and then relink to produce a

modified executable containing the modified Library. (It is understood that

the user who changes the contents of definitions files in the Library will

not necessarily be able to recompile the application to use the modified

definitions.)

b) Use a suitable shared library mechanism for linking with the Library. A

suitable mechanism is one that (1) uses at run time a copy of the library

already present on the user's computer system, rather than copying library

functions into the executable, and (2) will operate properly with a

modified version of the library, if the user installs one, as long as the

modified version is interface-compatible with the version that the work was

made with.

c) Accompany the work with a written offer, valid for at least three years,

to give the same user the materials specified in Subsection 6a, above, for

a charge no more than the cost of performing this distribution.

d) If distribution of the work is made by offering access to copy from a

designated place, offer equivalent access to copy the above specified

materials from the same place.

e) Verify that the user has already received a copy of these materials or

that you have already sent this user a copy.

For an executable, the required form of the "work that uses the Library" must

include any data and utility programs needed for reproducing the executable from

it. However, as a special exception, the materials to be distributed need not

include anything that is normally distributed (in either source or binary form)

with the major components (compiler, kernel, and so on) of the operating system

on which the executable runs, unless that component itself accompanies the

executable.

It may happen that this requirement contradicts the license restrictions of other

proprietary libraries that do not normally accompany the operating system. Such a

contradiction means you cannot use both them and the Library together in an

executable that you distribute.

7. You may place library facilities that are a work based on the Library

side-by-side in a single library together with other library facilities not

covered by this License, and distribute such a combined library, provided that

the separate distribution of the work based on the Library and of the other

library facilities is otherwise permitted, and provided that you do these two

things: