Revision History

Release Number	Revision Date	Revision Description
3.13	06-2025	NEW content: Getting Started: Default Ports Working with the Tightening Tab: Step Restrictions. Working with the Configurations Tab: EHMI. Working with the Integrated Controller Tool Tab: Open Protocol, Choosing Accessories. Network Configurations: Configuring the Tool as a Wireless Access Point. Working with the Settings Tab: Configuration of HTTPS, Certificates, Configuration of the Extended Logging. Server Connection: Configuring the Remote Logging Connection. UPDATED content: Licenses Update Software Version. Working with the Integrated Controller Tool Tab: Maintenance. Configuring a Wireless Client
3.11	02-2024	NEW content: Multistep Program configuration: Adding a Multistep Program, Deleting a Multistep Program. Tightening step: AM - Manual Loosen to Angle. Step monitor: PrT - Prevailing Torque. Source Batch information on wrench's EHMI: Barcode Scan Information. Configuring tool LEDs behavior: Tool LEDs. Configuring an I/O Expander. Configuring a Stacklight. HTTPS Configuration: Viewing Certificates, Signing the ToolsControl Issuer, Renewing Certificates. Production strategy: Torque (Control) / Prevailing Torque (Monitor). I/O expander and stacklight available signals list: I/O Expander and Stacklight Signals UPDATED content: Multistep Tightening Strategy. Configuring a source tightening (Barcode required): Source Tightening Properties, Configuring a Source Tightening. Batch sequence settings (Barcode required): Batch Sequence Settings. Enabling Gauge Indicator on EHMI: General Settings.
3.10	09-2023	NEW content: Tightening steps: YM - Manual Tighten to Yield, RTP - Residual Torque/Peak, RTA - Residual Torque/Angle. Production strategy: Yield Point. Quality control strategy: Yield Point (Joint Analysis) Clearing Results procedure: Performing Factory Reset and Clearing Results. Live results view: Live Results View. UPDATED content: Licenses classes (STRwrench Integrated Controller Production, STRwrench Integrated Controller Quality): Licenses. Configuring a source tightening (Socket/TAG identifier required): Source Tightening Properties, Configuring a Source Tightening. Enabling Keyboard Source: General Settings. Power Focus connection parameters (STRwrench/STwrench switch): Connecting to an External Controller. Bluetooth pairing procedures: Pairing STRwrench to Power Focus, Pairing STRwrench to STpad, Pairing STRwrench to STpalm. Stored results (results acquired when connected to STpad/STpalm included in the stored results list): Stored Results View, Viewing Results.
3.9	03-2023	NEW content: How to connect STRwrench to an external controller: Working with the Integrated Controller Tool Tab,Connecting to an External Controller. Pairing procedure for Bluetooth connection to an external controller: Pairing STRwrench to an External Controller for Bluetooth Connection, Pairing STRwrench to Power Focus, Pairing STRwrench to STpad, Pairing the STRwrench to STpalm. How to configure server connection to ToolsNet and Atlas Copco License Manager: Server connections, Configuring the License Manager Connection, Configuring the ToolsNet Connection. How to activate the PIN feature: Activating the PIN. How to perform Factory Reset: Performing Factory Reset and Clearing Results. Quality Control strategies (Residual Torque/Angle, Residual Torque/Peak): Quality Control Strategies, Residual Torque / Angle, Residual Torque / Peak. UPDATED content: Strategies parameters: Production strategies, Torque, Torque (Control) / Angle (Monitor), Torque (Monitor) / Angle (Control), Torque + Angle, Torque (Control) / Angle (control) OR, Torque (Control) / Angle (control) AND, Loose. LEDs behavior during strategies execution: Production strategies, Torque, Torque (Control) / Angle (Monitor), Torque (Monitor) / Angle (Control), Torque + Angle, Torque (Control) / Angle (control) OR, Torque (Control) / Angle (control) AND.
3.8	06-2022	NEW content: User Interface Home Menu and Icons: Home menu, Icons. How to create a Tightening Program: Creating a Tightening Program. How to assign a Task to the Virtual Station: Assigning a Task to the Virtual Station. Configuration of Multistep Tightening Strategies, Tightening Program Properties, Tightening Steps and Step Monitors: Working with the Tightening Tab, Multistep Tightening Strategy, Multistep Configuration User Interface, Tightening Program Properties, Tightening Steps, TM - Manual Tighten to Torque, AM - Manual Tighten to Angle, T&AM – Manual Tighten to Torque and Angle, T\|AM – Manual Tighten to Torque or Angle, Step Monitors, A - Angle, LD - Loosening Detection, T - Torque. Configuration of Batch Sequences: Working with the Batch Sequence Tab, Batch Sequence Settings, Adding a New Batch to a Batch Sequence, Deleting a Batch from a Batch Sequence. Configuration of Source Tightenings such as Socket Selector, TAG, Open Protocol: Working with the Sources Tab, Source Tightening, Source Tightening Properties, Configuring a Source Tightening, Source Batch, Configuring a Source Batch, Significant Positions, Significant Positions to Read in Barcode String, Combining Identifier Strings, Saved Positions. Enable/disable the TAG Selection function: General Settings. How to configure a Socket Selector: Configuring a Socket Selector. How to assigning configurations to the Virtual Station: Virtual Station, Changing a License Type, Assigning a Task to a Virtual Station, Open Protocol, Choosing Accessories. New Tool information such as calibration dates, number of successful tightenings, angle correction coefficient: Maintenance. Tool Intelligent Application Module: IAM. How to configure Bluetooth communication: Configuring Bluetooth. How to configure ToolsTalk communication: Configuring the ToolsTalk Connection. Setting the Torque Unit: Preferences. How to install/remove Tool Licences: Working with the License Assignment Tab, Installing Licenses on the Tool, Removing Licenses from the Tool. How to view Tightening Results and Synchronized Traces: Viewing Results, Stored Results View, Viewing Synchronized Traces.
3.7	02-2022	NEW content: Export/import information such as tightening programs, tool configurations, events, log files: Exporting and Importing Configurations, Exported information and File Format. Loosening strategy: Loose.
3.6	06-2021	NEW content: Enable/disable functionality such as TAG, vibration, buzzer, Front LED: General Settings. Tag management: TAG Information. Tightening strategies: Production strategies, Torque, Torque (Control) / Angle (Monitor), Torque (Monitor) / Angle (Control), Torque + Angle, Torque (Control) / Angle (control) OR, Torque (Control) / Angle (control) AND. Correction coefficients for extensions: Correction Coefficients for Extensions, How to calculate the Torque Correction Coefficient, How to Calculate the Angle Correction.
1.0	03-2021	First edition.