Hydraulic Installation
Make sure that the pump is disconnected from the main supply.
Connect one end of the hose to the pump.
Hydraulic connector Lay the hoses down in a way that they cannot be forced or damaged and out of the passing vehicles area. Always respect the minimum curve radius of 175 mm of the hose.
Use the hoses and connection elements of the recommended characteristics and without any wear and tear (worn exterior coat, bents, deformed, worn out or rusty connectors, etc.).
The pump is supplied ready for use with the exception of the hydraulic oil.
Before every use, make sure that the pump tank is filled with the adequate amount of oil. If necessary, fill the tank only with oil with the recommended characteristics always respecting the minimum and maximum level. See also sections Hydraulic Fluid and Maintenance and Conservation Program.
Wear protective gloves, eliminate any spillage immediately and clean the surfaces with degreaser.
