Operating Conditions
Reading the present manual is highly recommended to carry out correctly the transport, installation, commissioning, use, regulation, assembly, disassembly and maintenance of the hydraulic pump.
This manual is an integral part of the supplied product; the buyer is responsible for enforcing its careful reading to all the personnel involved with the equipment and those, for any reason, who have to use it or intervene on it. The hydraulic pressure pump is a piece of equipment suitable for its industrial use, in association with bolt tensioners. The hydraulic pressure pumps described in this manual are not suitable for domestic use or similar use; therefore they must not be within reach of children or, in general, of people without expertise in installation, operation and maintenance.
The contents of this manual correspond to the “Commercial Type” pump application. Other similar pumps supplied by order can have variations with regards to the instructions contained on this manual. The manufacturer does not assume any responsibility for possible injuries to people, animals or damages to goods, caused by not strictly following all the recommendations contained in this manual. For safety reasons and to ensure the conditions of the warranty, it is absolutely prohibited to use it in case of a breakdown or variations in the performance of the pressure pump. To obtain subsequent information, contact Atlas Copco local service or sales representative.
The standard pressure pump has NOT been manufactured to be used in explosive environments or to be installed in areas classified as with explosion risk. To work in classified areas, the manufacturer or the dealer must be contacted and there must be equipment available with flame proof characteristics, codified in the pressure pump plate that satisfy the classification demands of the installation zone.
