1. ToolsTalk 2
2. Reports
3. References

References

• File Formats For Export and Import
• Input Signals
  • Abort Sequence - 10012
  • Acknowledge Events - 10004
  • Activate Tool Scanner - 10075
  • Batch Decrement - 10002
  • Batch Increment - 10001
  • Bypass Tightening Program - 10008
  • Disable Fieldbus - 10049
  • Disable tool - 30000
  • Disable Tool Scanner - 10119
  • Dynamic Batch Size - 10074
  • External OK - 10063
  • Fieldbus Lock Loosening - 20021
  • Fieldbus Lock Tightening - 20020
  • Flush Read Result Queue - 30005
  • Select Input Bit 4 - 10066
  • ID for Dynamic Batch Size - 10073
  • Lock Loosening - 20003
  • Lock Tightening - 20002
  • Lock Tool Active High - 20004
  • Lock Tool Active Low - 20061
  • Manual Mode - 10061
  • Master Unlock - 10005
  • Pulse Stop - 10030
  • Read Result Handshake Ack - 30004
  • Reset All Identifiers - 10115
  • Reset Batch - 10003
  • Reset Batch Sequence - 10053
  • Reset Bistable Relay - 10022
  • Reset Latest Identifier - 10114
  • Reset Relays - 10120
  • Reset Sequence Status - 10118
  • Reset Too Many NOK - 10013
  • Select Input - 10020
  • Select Input and Dynamic Batch Size - 30007
  • Select Input Bit 0 - 10016
  • Select Input Bit 1 - 10017
  • Select Input Bit 2 - 10018
  • Select Input Bit 3 - 10019
  • Select Input Bit 5 - 10067
  • Select Input Bit 6 - 10068
  • Select Input Bit 7 - 10069
  • Select Input Bit 8 - 10070
  • Select Input Bit 9 - 10071
  • Select Loosening - 10029
  • Select Next Identifier Number - 10116
  • Select Previous Identifier Number - 10117
  • Set Bistable Relay - 10021
  • Socket Selector External Green Light - 10046
  • Socket Selector External Red Light - 10047
  • Start Loosening - 10011
  • Start Tightening - 10010
  • Start Tightening Pulse - 10024
  • Start Tools - 10028
  • To SoftPLC - 10065
  • Unlock Tool on Complete - 10051
  • Unlock Tool on Disable - 10059
• Output Signals
  • Active Identifier String - 186
  • Active Identifier String 1 - 188
  • Active Identifier String 2 - 189
  • Active Identifier String 3 - 190
  • Active Identifier String 4 - 191
  • Batch Completed - 30
  • Batch Completed NOK - 37
  • Batch Completed OK - 36
  • Batch Count - 31
  • Batch Running - 32
  • Batch Sequence Completed NOK - 46
  • Batch Sequence Completed OK - 45
  • Batch Sequence Done - 48
  • Batch Sequence Running - 47
  • Bistable Relay - 40
  • Calibration Alarm - 138
  • Configuration Version - 88
  • Controller Switched On - 42
  • Current Running Batch - 180
  • Direction Switch CCW - 13
  • Direction Switch CW - 12
  • Emergency Stop - 20036
  • Event Code - 30001
  • Event Code Severity - 30003
  • Event Present - 161
  • Fieldbus Disconnected - 96
  • Final Angle - 31003
  • Final Angle - 8
  • Final Angle Status - 31006
  • Final Measured Current - 31017
  • Final Target Speed - 31020
  • Final Target Torque - 31015
  • Final Torque - 31002
  • Final Torque - 5
  • Final Torque Status - 31009
  • First Target Torque - 31019
  • From SoftPLC - 10064
  • High Angle - 10
  • High Torque - 7
  • Identifier Received - 100
  • Last Received Identifier String - 187
  • License Server Connection Lost - 134
  • Loosening Disabled - 184
  • Loosening Enabled - 185
  • Loosening is Locked - 28
  • Loosening NOK - 74
  • Loosening OK - 70
  • Low Angle - 9
  • Low Torque - 6
  • Manual Mode - 101
  • Max Consecutive NOK Reached - 35
  • Open End in Open Position - 89
  • Open Protocol Disconnected - 95
  • Pass-Through Identifier - 104
  • Program End - 168
  • Program Start - 132
  • Pulse Tool Alarm Oil Level Empty - 167
  • PVT Compensate Value - 31029
  • Read Result Queue Flushed - 30006
  • Ready to Start - 29
  • Received Identifier 1 - 192
  • Received Identifier 2 - 193
  • Received Identifier 3 - 194
  • Received Identifier 4 - 195
  • Rehit - 31014
  • Remaining Batch - 33
  • Rundown Angle - 31038
  • Rundown Angle High - 165
  • Rundown Angle Low - 166
  • Selected Sequence Bit 0 - 139
  • Selected Sequence Bit 1 - 140
  • Selected Sequence Bit 2 - 141
  • Selected Sequence Bit 3 - 142
  • Selected Sequence Bit 4 - 143
  • Selected Sequence Bit 5 - 144
  • Selected Sequence Bit 6 - 145
  • Selected Sequence Bit 7 - 146
  • Selected Sequence Bit 8 - 147
  • Selected Sequence Bit 9 - 163
  • Selected Sequence Id - 84
  • Selected Tightening Program - 69
  • Selected Tightening Program Bit 0 - 148
  • Selected Tightening Program Bit 1 - 149
  • Selected Tightening Program Bit 2 - 150
  • Selected Tightening Program Bit 3 - 151
  • Selected Tightening Program Bit 4 - 152
  • Selected Tightening Program Bit 5 - 153
  • Selected Tightening Program Bit 6 - 154
  • Selected Tightening Program Bit 7 - 155
  • Selected Tightening Program Bit 8 - 156
  • Selected Tightening Program Bit 9 - 157
  • Sequence Aborted - 160
  • Service Indicator Alarm - 137
  • Size of Sequence - 181
  • Socket Selector Disconnected Lock - 20039
  • Software Major Version - 86
  • Software Minor Version - 87
  • Software Release Version - 85
  • Start Final Angle - 31016
  • Station Ready - 71
  • Thread Direction CCW - 26
  • Tightening Date Day - 31032
  • Tightening Date Month - 31033
  • Tightening Date Year - 31034
  • Tightening Disabled - 182
  • Tightening Done - 31010
  • Tightening Enabled - 183
  • Tightening is Locked - 27
  • Tightening NOK - 4
  • Tightening OK - 3
  • Tightening Program Max Angle - 31004
  • Tightening Program Max Torque - 31007
  • Tightening Program Min Angle - 31005
  • Tightening Program Min Torque - 31008
  • Tightening Time - 31031
  • Tightening Time High - 135
  • Tightening Time Hour - 31035
  • Tightening Time Low - 136
  • Tightening Time Minute - 31037
  • Tightening Time Second - 31036
  • Tool Battery Low - 90
  • Tool Connected - 73
  • Tool Disabled - 158
  • Tool Enabled - 159
  • Tool Function Button Pressed - 179
  • Tool Health OK - 103
  • Tool Loosening - 22
  • Tool Rotation CCW - 25
  • Tool Rotation CW - 24
  • Tool Running - 23
  • Tool Serial Number Numeric - 31021
  • Tool Tag Identifier - 94
  • Tool Tightening - 21
  • Total Number of Tightenings - 31018
  • Trigger pressed - 11
  • Virtual Station Name - 105
• Input/Output Signals
  • Clear Results - 39
  • Disable Open Protocol Commands - 10060
  • External Identifier - 10045
  • External Monitored 1 - 10035
  • External Monitored 2 - 10036
  • External Monitored 3 - 10037
  • External Monitored 4 - 10038
  • External Monitored 5 - 10039
  • External Monitored 6 - 10040
  • External Monitored 7 - 10041
  • External Monitored 8 - 10042
  • Fieldbus Keep Alive - 30002
  • Generic IO 1 - 50
  • Generic IO 10 - 59
  • Generic IO 2 - 51
  • Generic IO 3 - 52
  • Generic IO 4 - 53
  • Generic IO 5 - 54
  • Generic IO 6 - 55
  • Generic IO 7 - 56
  • Generic IO 8 - 57
  • Generic IO 9 - 58
  • Generic Rising Edge 1 - 169
  • Generic Rising Edge 10 - 178
  • Generic Rising Edge 2 - 170
  • Generic Rising Edge 3 - 171
  • Generic Rising Edge 4 - 172
  • Generic Rising Edge 5 - 173
  • Generic Rising Edge 6 - 174
  • Generic Rising Edge 7 - 175
  • Generic Rising Edge 8 - 176
  • Generic Rising Edge 9 - 177
• Event Codes
• Input Signals Used by the Fieldbus