Swivel Arm and Feeding Head
The Swivel Arm guides the air blown screws into the Alignment Jaws of the Feeding Head while it is in the loading position. In basic position and working position, the Swivel Arm is lifted.
In the Feeding Head, the screw is held in the Alignment Jaws, brought forward to the component and screwed into the component using the Bit Complete.
No. | Component | Function |
1 | Connection | Fastening for the Swivel Arm Quick-Change Coupling for the Feeding Head |
Swivel Arm with holder and Tube Connection | ||
2 | Swivel Arm | Guiding screws, which are air blown from the Screw Feeding Unit, into the Feeding Head |
3 | Holder | Holder for the Swivel Arm |
4 | Tube Connection | Connection for the Feeding Tube |
Feeding Head with holder and Alignment Jaws | ||
5 | 2 x Holder with Alignment Jaw | The Alignment Jaws hold the air blown screw during the screw driving process. The Alignment Jaws are connected to their holders with Tension Pins. Springs in the Holders close the Alignment Jaws |
6 | Bit Complete | Moving the screw forwards during the screwing process. |
