Main Components of the Screw Feeding System
The individual components or the system composition can be customer specific, and may therefore differ from the components shown here.
The screw fastening system consists of the following main components
No. | Component | Function |
1 | Screw Feeding Tightening Module
| To carry out the screwing process |
2 | Power Focus 6000 | Control and monitoring of the screw fastening and feeding process |
3 | Screw Feeding Unit | Transport, sort and separating the screws, feed the screws into the Screw Feeding Tightening Module using compressed air |
4 | Tool Cable | Electrical connection between the Power Focus 6000 and the Screw Feeding Tightening Module |
5 | Connecting Line | Electrical connection between the start button on the Screw Feeding Tightening Module and the Screw Feeding Unit |
6 | Air Connection | Pneumatic connection for Forward and Return Stroke between the Screw Feeding Tightening Module and the Screw Feeding Unit |
7 | Connection Cable | Electrical connection between the Power Focus 6000 and the Screw Feeding Unit |
8 | Signal Line | Connection between the Power Focus 6000 and the Screw Feeding Unit. An adaptor must be used for this connection. It is located behind the screen of the Power Focus 6000.
|
9 | Feeding Tube | Pneumatic transport of screws from the Screw Feeding Unit to the Screw Feeding Tightening Module |
For more information about the Screw Feeding Unit, see product information for the Screw Feeding Unit.
For more information about the Power Focus 6000, see product information for the Power Focus 6000.
