Product Functionality
Driving Tool
The Driving Tool generates the rotary motion.

No. | Component | Function |
1 | Drive Shaft | Geared shaft of the rotary drive |
2 | Clamp Sleeve | Clamp for air hose guidance (Forward and Return Stroke) and cable management (activation of the trigger on the Connecting Module) |
Screw Feeding Front Part
The Screw Feeding Front Part carries out the actual screw driving process. The Stroke Module is part of the Screw Feeding Front Part.

No. | Component | Function |
1 | Connecting Module with trigger | Triggering the screw driving process via the trigger Connection of air hoses (Forward and Return Stroke) of the Stroke Module |
2 | Handle | Handling of the Screw Feeding Tightening Module |
3 | Connection | Fastening for the Swivel Arm Quick-Change Coupling for the Feeding Head |
4 | Feeding Head with Alignment Jaws | Holding the screw |
5 | Swivel Arm | Guiding the screws, which are blown from the Screw Feeding Unit, into the Feeding Head |

No | Component |
1 | Stroke Module |
2 | Swivel Arm |
3 | Stop Sleeve with Threaded Sleeve |
4 | Feeding Head with Alignment Jaws |
5 | Bit Complete with Adapter Rod, Threaded Sleeve, and Bit |
The animation below shows the functionality of the Quick-Change Coupling.