Detailed Functional Description of the Screw Feeding Front Part
The Bit Complete of the Screw Feeding Front Part will change into different positions depending on the work step it is doing.
No. | Position |
1 | Intermediate position |
2 | Working position |
3 | Loading position |
Bit Complete in intermediate position
The Bit Complete is in mid position
The Swivel Arm is swivelled out
The screw is held in the Alignment Jaws of the Feeding Head
The next screw is ready in the Swivel Arm
No rotation of the Driving Tool
Bit Complete in working position
The screw fastening process has been started by pressing the start button or the trigger.
The Swivel Arm is swivelled out.
The rotation of the Driving Tool is started.
Bit Complete moves forwards (F > 100 N).
The Bit finds the drive characteristic of the screw and pushes the screw through the Alignment Jaws, and turns the screw into the component until the screw head stops.
Simultaneously, the next screw is blown into the Swivel Arm.
Bit Complete in loading position
The Swivel Arm is swivelled in.
No rotation of the Driving Tool.
The Bit Complete moves backwards.
The screw provided in the Swivel Arm is blown into the Alignment Jaws of the Feeding Head.
The Bit Complete moves to the intermediate position.
The next screw is blown from the Screw Feeding Unit to the Swivel Arm.
Bit Complete in Bit change position
The "Bit Change" mode is activated on the Screw Feeding Unit.
The Bit Complete moves forwards.
Remove the Feeding Head by pulling the Quick-Change Coupling backwards.
Remove the Bit Complete by pulling the Bit Quick-Change Coupling forwards.
The Bit Complete will pop out as soon the Bit Quick-Change Coupling is pulled forwards.
The Bit Quick-Change Coupling remains open and will close automatically when the Bit Complete is pushed in again.
