Operating the GFA System

Crushing Hazard

Never reach into the open-end head. Moving parts can crush and cut. Keep hands and fingers away from moving parts.

Crushing Hazard

The Dual trigger forces the user to use both hands to operate the tool. If not used, the operator can accidentally start the tool while adjusting the crowfoot, thus resulting in a serious hand injury.

• Make sure the tool cannot be started once the Dual trigger has been released.

• Always test the tool by first releasing the trigger of the Dual trigger, then push the trigger of the tool. If the tool starts; stop working.

Risk of Injury

Incorrect direction of rotation

• If the output gear is used in the opposite direction of rotation than what is required, only a limited torque can be absorbed. Exceeding the return flow limiting can lead to severe injuries and property damage.

• Observe the rotational direction instructions of the system.

• Always adapt the direction of rotation to the screwing requirements.