1. RTP1300-HR20
2. Product Information
3. Service Overview
4. Environmental circumstances

Environmental circumstances

Daily maintenance if needed.

All environments are different; take the time to learn what your environment is like, and build your maintenance on this knowledge.

When the tool is used in an environment with a large amount of water in the surroundings, special care has to be taken to keep the internal and external parts free from water during storage. If the tool is stored for a long time, it is recommended that the tool is disassembled and that internal/external parts are free from water. All parts should be re-greased and re-oiled, according to the instructions before storage.

When the tool is used in an environment with a lot of particles in the pressurized air system, make sure that the filter in the FRL unit is clean, as well as the filter in the silencer of the tool. Too many particles will change the performance of the tool.

The tool is intended for lubricated air, supplied by the FRL unit. Make sure that the oil level is above minimum levels on a regular basis.