Product Information

• General Information
  • Safety Signal Words
  • Warranty
  • Website
  • ServAid
  • Safety Data Sheets MSDS/SDS
  • Country of Origin
  • Dimensional Drawings
• Overview
  • General properties
  • Applications
  • Product Data
  • Technical Product Data

General Information

WARNING

Risk of Property Damage or Severe Injury

Ensure that you read, understand and follow all instructions before operating the tool. Failure to follow all the instructions may result in electric shock, fire, property damage and/or severe bodily injury.

• Read all Safety Information delivered together with the different parts of the system.

• Read all Product Instructions for installation, operation and maintenance of the different parts of the system.

• Read all locally legislated safety regulations regarding the system and parts thereof.

• Save all Safety Information and instructions for future reference.

Safety Signal Words

Warranty

• Product warranty will expire 12+1 months after dispatch from Atlas Copco's Distribution Center.

• Normal wear and tear on parts is not included within the warranty.

  • Normal wear and tear is that which requires a part change or other adjustment/overhaul during standard tools maintenance typical for that period (expressed in time, operation hours or otherwise).

• The product warranty relies on the correct use, maintenance, and repair of the tool and its component parts.

• Damage to parts that occurs as a result of inadequate maintenance or performed by parties other than Atlas Copco or their Certified Service Partners during the warranty period is not covered by the warranty.

• To avoid damage or destruction of tool parts, service the tool according to the recommended maintenance schedules and follow the correct instructions.

• Warranty repairs are only performed in Atlas Copco workshops or by Certified Service Partners.

Atlas Copco offers extended warranty and state of the art preventive maintenance through its ToolCover contracts. For further information contact your local Service representative.

Website

Information concerning our Products, Accessories, Spare Parts and Published Matters can be found on the Atlas Copco website.

Please visit: www.atlascopco.com.

ServAid

ServAid is a portal that is continuously updated and contains Technical Information, such as:

• Regulatory and Safety Information

• Technical Data

• Installation, Operation and Service Instructions

• Spare Parts Lists

• Accessories

• Dimensional Drawings

Please visit: https://servaid.atlascopco.com.

For further Technical Information, please contact your local Atlas Copco representative.

Safety Data Sheets MSDS/SDS

The Safety Data Sheets describe the chemical products sold by Atlas Copco.

Please consult the Atlas Copco website for more information www.atlascopco.com/sds.

Country of Origin

For the Country of Origin, please refer to the information on the product label.

Dimensional Drawings

Dimensional Drawings can be found either in the Dimensional Drawings Archive, or on ServAid.

Please visit: http://webbox.atlascopco.com/webbox/dimdrw or https://servaid.atlascopco.com.

Overview

• General properties
• Applications
• Product Data
• Technical Product Data

General properties

Atlas Copco torque arms are an excellent means of assistance when using electric or pneumatic screwdrivers and nutrunners. They stress relieve the operators arm, wrist and shoulder from vibration, torque and weight during repeated actions. Even at a modest level of exertion repeated actions can lead to severe disorders. As an additional advantage the Atlas Copco torque arms also make savings on the tool accessories e.g.bits, taps etc. due to entering the screw or the hole more in right angle.

Torque arms in the SMS series have a large working range and are exceptionally easy to position and handle. The design is intended for heavy duty operations over a long period of time.Tool torque should not exceed the specified torque range of each specific arm.

Applications

Atlas Copco torque arms are an excellent means of assistance when using electric or pneumatic screwdrivers and nutrunners. They stress relieve the operators arm, wrist and shoulder from vibration, torque and weight during repeated actions.

Even at a modest level of exertion repeated actions can lead to severe disorders.

As an additional advantage the Atlas Copco torque arms also make savings on the tool accessories e.g.bits, taps etc. due to entering the screw or the hole more in right angle.

Torque arms in the SML series have a large working range and are exceptionally easy to position and handle. The design is intended for heavy duty operations over a long period of time.

Tool torque should not exceed the specified torque range of each specific arm.

Product Data

Technical Product Data

Technical Product Data can be found on either ServAid, or the Atlas Copco website.

Please visit: https://servaid.atlascopco.com or www.atlascopco.com.

Installation

• Installation Instructions
  • Installing the torque arm
  • Installing the digital top encoder
  • Installing the torque arm attachment
  • Product Specifications
  • Installing the balancer

Installation Instructions

• Installing the torque arm
• Installing the digital top encoder
• Installing the torque arm attachment
• Product Specifications
• Installing the balancer

Installing the torque arm

Before you start the installation, measure the applicable position of the torque arm for your working area.

Fasten the torque arm base with 4 screws (not supplied) on a perfectly horizontal bench. Tighten the screws until the torque arm is properly seated.

Installing the digital top encoder

Installing the torque arm attachment

Before you start the installation, measure the applicable position of the torque arm for your working area.

Product Specifications

Installing the balancer

Before you start the installation, measure the applicable position of the torque arm for your working area.

Depending on the size and weight of the parts to be installed, a second person will be required to help to carry out installation step No.4.

1. After the foot part (1) has been fastened, the horizontal unit (2) is pushed onto the upright shaft (3).

   

2. Place the collar(4) onto the shaft (3) and let it rest on the horizontal unit (2) while performing the next steps.

   

3. Now install the balancer (5). To do this, the spring hook (4) is hooked into the link of the horizontal unit (2).

   

4. Lift the horizontal unit (2) until the balancer (5) can be inserted into the upright shaft (3).

   

5. Slide the collar along the shaft (3) until it's 1-2 mm beneath the balancer(6) unit.

   

   

6. Tighten the screw until the slight resistance is felt and twist the collar into its final position. Make sure the collar is correctly seated below the balancer.

   

7. Fully tighten the screw to the recommended torque (m6 = 10 Nm, m8 = 20 Nm, m10 = 20 Nm). Use appropriate torque wrench. When tight a gap should remain in the clamp portion of the collar. Take care, not to over tighten. over tightening could damage the collar which would lead to a decrease in the performance or failure.

Service

• Maintenance Instructions
  • Connecting the Turck I/O Module
  • Settings for horizontal arm rotary analog encoder
    • Calibration
• Lubrication Instructions
  • Lubrication

Maintenance Instructions

• Connecting the Turck I/O Module
• Settings for horizontal arm rotary analog encoder
  • Calibration

Connecting the Turck I/O Module

Settings for horizontal arm rotary analog encoder

The analog encoder is already set in plant. This calibration process is only for maintenance purpose.

Calibration

Connect the encoder to the Turck I/O Module.

Lubrication Instructions

• Lubrication

Lubrication

• We recommend that the bench stand pole is lubricated with a couple of drops of oil twice a year.

• The bushings on the arms does not need to be lubricated.