Working with the IRC-Connect
The IRC-Connect operation workflow depends on the remote device connected to the tool.
For a detailed explanation on how to work with the IRC-Connect, refer to the User Guide specific to the remote device in use.
General workflow:
The remote device sends a Pset (Parameter set) to the IRC-Connect to run the test.
The IRC-Connect Measurement LED starts blinking.
The test(s) is performed.
The IRC-Connect sends each test result (and trace where applicable) to the remote device.
If the IRC-Connect gets disconnected from the remote device, the results of the test are stored in the IRC-Connect memory. Once the IRC-Connect is reconnected, the results/traces are sent to the remote device.
During the test/tightening operation, the Result LEDs on the IRC-Connect behave accordingly both to test results and to potential error conditions. for further information, refer to LED system.
For further information, refer to STa 6000/STa 6000 Plus User Guide, STpad Configuration Manual, STpalm Configuration Manual.
