Gauge Indicator
On the EHMI, it is possible to set a gauge indicator that provides a visual feedback of the progress of the ongoing tightening. According to the operation's settings, the gauge indicator can display torque reading, angle reading or both.
To enable this feature, set Gauge indicator to On in the Tool Configuration's General Settings of the STRwrench Firmware web user interface. For more information, refer to STRwrench Firmware User Guide.
Posizione | Nome | Descrizione |
|---|---|---|
1 | Current torque value | Current numerical value of the ongoing torque reading. |
2 | Torque gauge indicator | Gauge indicator for torque reading. |
3 | Valore dell'angolo | Current numerical value of the ongoing angle reading. |
4 | Angle gauge indicator | Gauge indicator for angle reading. |
5 | Lower torque limit | Visual display of the lower torque limit value set for the ongoing tightening operation. |
6 | Target torque indicator | Visual display of the target torque value set for the ongoing tightening operation. |
7 | Torque reading indicator | Visual display of the current torque value of the ongoing torque reading. |
8 | Upper torque limit | Visual display of the upper torque limit value set for the ongoing tightening operation. |
9 | Lower angle limit | Visual display of the lower angle limit value set for the ongoing tightening operation. |
10 | Target angle indicator | Visual display of the target angle value set for the ongoing tightening operation. |
11 | Angle reading indicator | Visual display of the current angle value of the ongoing torque reading. |
12 | Upper angle limit | Visual display of the upper torque limit value set for the ongoing tightening operation. |
