Before Starting the Software

IMPORTANT! ToolsTalk Service 2 software must be installed before any Docking Station (DS), Communication Unit 3 (CU3), and/or Built in Device Adapters (USB), with Device Adapter are connected to the computer.

Installation and Connection Sequence.

  1. Install ToolsTalk Service 2 software.

  2. Connect the Docking Station (DS), Communication Unit 3 (CU3), and/or Built in Device Adapters (USB).

  3. Start the ToolsTalk Service 2 software.

Relevant Information

ToolsTalk Service 2 User Edition | 1.13

Published: 2021-05-10

© Atlas Copco Industrial Technique AB, 2021 | Legal Notice