Computer Requirements
To run the ToolsTalk Service 2 software the following minimum computer requirements need to be met:
Area | Category | Minimum requirements | Comments |
|---|---|---|---|
Computer client requirements | Operating system | Windows 10 or 7 (SP1) 64-bit version | |
Processor | 1 gigahertz (GHz) or higher 64-bit Intel or AMD processor | ||
RAM | 2 gigabytes (GB) or more | ||
Display resolution | 1024x768 pixels or higher | ||
Disk space | 2 gigabytes (GB) or more | The ToolsTalk Service 2 application and database require at least 2 gigabytes (GB) of free disk space, in addition to the operating system disk space requirements. | |
Network card | A configured network card |
A docking station is required in order to connect to SB or STB tools (Atlas Copco Industrial Technique AB product number 8433 3900 50).
A Communication Unit 3 (CU3) is required in order to connect to cable tools (Atlas Copco Industrial Technique AB product number 8092 1168 15).
Older versions of the CU3 are not compatible with the ToolsTalk Service 2 software.
If USB hubs are used to connect CU3s and Docking Stations (DS) to a PC running the ToolsTalk Service 2 software, it is recommended not to mix CU3s and DS on the same hub.
If USB hubs are used to connect CU3s and DS to a computer running the ToolsTalk Service 2 software, it is recommended not to connect several USB hubs in cascade.
It is recommended to only use certified USB cables and hubs when connecting external USB equipment. For example, DS, CU3s and SRB/TBP tools connected to the computer running ToolsTalk Service 2 (certified USB products are registered at USB.org).
