Copying Firmware to a Tool

This function only supports tools using SD memory cards.

  1. Disconnect the tool from ToolsTalk Service 2 (select disconnect in UI and remove USB cable).

  2. Remove the battery from the tool.

  3. Remove the SD memory card from the tool, and then insert it into the computer.

  4. Select download , then the COPY FIRMWARE screen will be displayed.

  5. On the COPY FIRMWARE screen, choose whether to copy the firmware from the database or browse for a local file.

  6. Select COPY.

  7. When the copying is completed, remove the SD memory card from the computer.

  8. Insert the SD memory card back into the tool.

  9. Connect the USB cable to the tool.

  10. Reinstall the battery and select Connect in ToolsTalk Service 2.

  11. The tool starts an autonomous action in order to install the firmware.

  12. The tool may request the user to run the Factory Reset service task or Default Reset service task (depending on the firmware used).

ToolsTalk Service 2 User Edition | 1.13

Published: 2021-05-10

© Atlas Copco Industrial Technique AB, 2021 | Legal Notice