Configuring the Wi-Fi Zone Tethering
On the Wireless Settings tab 
, go to the WI-FI ZONE TETHERING properties. To configure the Wi-Fi zone tethering, the Wi-Fi zone tethering needs to be set to On, this will open up the WI-FI ZONE TETHERING properties for further configuration.
Status
Hover the mouse over the green, yellow, or red indicator, to see the status descriptions.
Green - Wi-Fi zone tethering is turned on, the wireless settings are password protected, and the Wi-Fi state is enabled.
Yellow - Wi-Fi zone tethering is turned on but Wi-Fi state is disabled. This status has higher priority than the yellow status below.
Yellow - Wi-Fi zone tethering is turned on but the wireless settings are not password protected. This status has lower priority than the yellow status above.
Red - Wi-Fi zone tethering is turned off.
Power on Limit
The number of hours the tool may be powered on before it is locked, when the tool is not connected to the Wi-Fi zone.
Power Cycles Limit
The number of times the tool may be powered on before it is locked, when the tool is not connected to the Wi-Fi zone.
Password
The Wireless settings tab is password protected when Wi-Fi zone tethering is enabled and a password is turned on. The Wireless settings tab will be locked the next time the tool is connected.
