Copying and Pasting a Sync Mode
Existing Sync Modes can be copied and pasted on the same controller, or copied from one controller and then pasted to another.
Copy and Paste are only possible if they are performed on the same controller, or different controllers running the same software version and controller type.
On the menu bar, select the Sync Mode
tab. The workspace displays a list of available Sync Modes.Copy the Sync Mode by either:
Right-click the Sync Mode to copy, and then choose Copy from the menu.
Or select multiple Sync Modes by checking the check box in front of each row, right-click, and then choose Copy from the menu.
In the Plant Structure
, select the controller to paste the Sync Mode to. On the menu bar, select the Sync Mode
tab, and then right-click anywhere in the workspace area and choose Paste. The pasted Sync Mode is added to the first available position in the list.
If there are no available slots then the Sync Mode will be added to the bottom of the list and assigned the lowest available index number. It is not possible to change the index number to rearrange the order. (This operation is valid only for tightening Sync Mode )
When pasting a Sync Mode, the connected Multistep Tightening Programs are also included. The loosening Sync Mode connected to that Multistep Tightening program is not copied by default. If there is no space to import the Multistep Tightening programs, because the maximum number has already been reached, then the whole paste operation will fail.
