1. ToolsTalk 2 FLEX
2. References
3. Fieldbus Signals

Fieldbus Signals

• Input Signals
  • Abort Sequence - 10012
  • Batch Decrement - 10002
  • Batch Increment - 10001
  • Bypass Tightening Program - 10008
  • Channel Command - 10054
    • Subsignals
      • Inhibit No Result
      • Inhibit NOK result
      • Inhibit OK result
      • Force pset
      • Force bolt id
  • Disable Fieldbus - 10049
  • Disable Test Bolt - 10057
  • Disable tool - 30000
  • Dynamic Batch Size - 10074
  • Enable Operation - 10055
  • Fieldbus AsyncData To PF - 10077
  • Fieldbus Lock Loosening - 20021
  • Fieldbus Lock Tightening - 20020
  • Flush Read Result Queue - 30005
  • Select Input Bit 4 - 10066
  • ID for Dynamic Batch Size - 10073
  • Lock Loosening - 20003
  • Lock Tightening - 20002
  • Lock Tool Active High - 20004
  • Lock Tool Active Low - 20061
  • Master Unlock - 10005
  • Pulse Stop - 10030
  • Read Result Handshake Ack - 30004
  • Reset All Identifiers - 10115
  • Reset Batch - 10003
  • Reset Batch Sequence - 10053
  • Reset Cycle Status - 10056
  • Reset Latest Identifier - 10114
  • Reset Sequence Status - 10118
  • Reset System Error - 10062
  • Reset Too Many NOK - 10013
  • Select Input - 10020
  • Select Input and Dynamic Batch Size - 30007
  • Select Input Bit 0 - 10016
  • Select Input Bit 1 - 10017
  • Select Input Bit 2 - 10018
  • Select Input Bit 3 - 10019
  • Select Input Bit 5 - 10067
  • Select Input Bit 6 - 10068
  • Select Input Bit 7 - 10069
  • Select Input Bit 8 - 10070
  • Select Input Bit 9 - 10071
  • Select Loosening - 10029
  • Select Next Identifier Number - 10116
  • Select Previous Identifier Number - 10117
  • Start Loosening - 10011
  • Start Loosening, Pulse - 10072
  • Start Tightening - 10010
  • Start Tightening Pulse - 10024
  • Start Tools - 10028
  • Start Tools, Pulse - 10113
  • To SoftPLC - 10065
  • Unlock Tool on Complete - 10051
  • Unlock Tool on Disable - 10059
• Output Signals
  • Active Identifier String - 186
  • Active Identifier String 1 - 188
  • Active Identifier String 2 - 189
  • Active Identifier String 3 - 190
  • Active Identifier String 4 - 191
  • Batch Completed - 30
  • Batch Completed NOK - 37
  • Batch Completed OK - 36
  • Batch Count - 31
  • Batch Running - 32
  • Batch Sequence Completed NOK - 46
  • Batch Sequence Completed OK - 45
  • Batch Sequence Done - 48
  • Batch Sequence Running - 47
  • Bolt Tightening Status - 79
    • Subsignals
      • All signals
      • Cycle running
      • Inhibited
      • In Selected Mode
      • Running repair
      • Running termination
      • Tightening running
      • Loosening running
      • Last cycle OK
      • Last cycle NOK
      • Last cycle Inhibited
      • Last cycle Not included
      • Last cycle Terminated by other
      • Last cycle Hardware error
      • Tool Led Mirror Green
      • Tool Led Mirror Yellow
      • Tool Led Mirror Red
      • Last tightening OK
      • Last tightening NOK
      • Last loosening OK
      • Last loosening NOK
      • Last cycle Timeout
      • Last cycle Torque High
      • Last cycle Torque Low
      • Last cycle Angle High
      • Last cycle Angle Low
  • Channel Hardware Status - 81
    • Subsignals
      • All signals
      • General HW error
      • Tool temp high
      • Drive temp high
      • Motortune needed
      • Drive voltage error
      • Emergency stop active
      • Tool cable invalid
      • Tool disconnected
      • Drive disconnected
      • Torque transducer error
  • Channel Tightening Status - 80
    • Subsignals
      • All signals
      • Cycle running
      • Inhibited
      • In Selected Mode
      • Running repair
      • Running termination
      • Tightening running
      • Loosening running
      • Last cycle OK
      • Last cycle NOK
      • Last cycle Inhibited
      • Last cycle Not included
      • Last cycle Terminated by other
      • Last cycle Hardware error
      • Tool Led Mirror Green
      • Tool Led Mirror Yellow
      • Tool Led Mirror Red
      • Last tightening OK
      • Last tightening NOK
      • Last loosening OK
      • Last loosening NOK
      • Last cycle Timeout
      • Last cycle Torque High
      • Last cycle Torque Low
      • Last cycle Angle High
      • Last cycle Angle Low
  • Configuration Version - 88
  • Controller Switched On - 42
  • Current Running Batch - 180
  • Cycle Complete - 77
  • Cycle NOK - 76
  • Cycle OK - 75
  • Cycle Running - 78
  • Cycle Ready To Start - 82
  • Emergency Stop - 20036
  • Event Code - 30001
  • Event Code Severity - 30003
  • Event Present - 161
  • Fieldbus AsyncData From PF - 107
  • Fieldbus Disconnected - 96
  • From SoftPLC - 10064
  • Last Received Identifier String - 187
  • Loosening is Locked - 28
  • Loosening NOK - 74
  • Loosening OK - 70
  • Max Consecutive NOK Reached - 35
  • No System Error - 83
  • No System Warning - 102
  • Program Start - 132
  • Read Result Queue Flushed - 30006
  • Received Identifier 1 - 192
  • Received Identifier 2 - 193
  • Received Identifier 3 - 194
  • Received Identifier 4 - 195
  • Remaining Batch - 33
  • Selected Mode Id - 72
  • Selected Sequence Bit 0 - 139
  • Selected Sequence Bit 1 - 140
  • Selected Sequence Bit 2 - 141
  • Selected Sequence Bit 3 - 142
  • Selected Sequence Bit 4 - 143
  • Selected Sequence Bit 5 - 144
  • Selected Sequence Bit 6 - 145
  • Selected Sequence Bit 7 - 146
  • Selected Sequence Bit 8 - 147
  • Selected Sequence Bit 9 - 163
  • Selected Sequence Id - 84
  • Sequence Aborted - 160
  • Service Indicator Alarm - 137
  • Size of Sequence - 181
  • Software Major Version - 86
  • Software Minor Version - 87
  • Software Release Version - 85
  • Station Ready - 71
  • Test Bolt Activated - 91
  • Tightening is Locked - 27
  • Tightening NOK - 4
  • Tightening OK - 3
  • Tool Loosening - 22
  • Tool Tightening - 21
• Input/Output Signals
  • Clear Results - 39
  • Disable Open Protocol Commands - 10060
  • External Identifier - 10045
  • External Monitored 1 - 10035
  • External Monitored 2 - 10036
  • External Monitored 3 - 10037
  • External Monitored 4 - 10038
  • External Monitored 5 - 10039
  • External Monitored 6 - 10040
  • External Monitored 7 - 10041
  • External Monitored 8 - 10042
  • Fieldbus Keep Alive - 30002
  • Generic IO 1 - 50
  • Generic IO 10 - 59
  • Generic IO 2 - 51
  • Generic IO 3 - 52
  • Generic IO 4 - 53
  • Generic IO 5 - 54
  • Generic IO 6 - 55
  • Generic IO 7 - 56
  • Generic IO 8 - 57
  • Generic IO 9 - 58
  • Generic Rising Edge 1 - 169
  • Generic Rising Edge 10 - 178
  • Generic Rising Edge 2 - 170
  • Generic Rising Edge 3 - 171
  • Generic Rising Edge 4 - 172
  • Generic Rising Edge 5 - 173
  • Generic Rising Edge 6 - 174
  • Generic Rising Edge 7 - 175
  • Generic Rising Edge 8 - 176
  • Generic Rising Edge 9 - 177