Configuring the Remote Logging Connection
To connect a controller to a remote logging server, configure and activate the remote logging settings on the controller:
Select a controller in the Plant structure
.Go to Settings
.The workspace area displays the Settings menus.
On the Remote Logging section, configure the following parameters:
Field
Description
On/Off
Enables/Disables communication with the remote logging server
Protocol
Selects TCP or UDP protocol
Server host
Remote logging server IP address
Server port
Remote logging server port
Select the applicable log level(s) for each facility:
Log level
SysLog classification
Error
Alert, Critical, Emergency, Error
Warning
Warning
Info
Informational, Notice
Select Set to apply the configurations on the controller.
