item | item | none |
2.19 | 06/2022 | UPDATED content: |
2.18 | 01/2022 | NEW content: In multistep: In multistep: Step Type: Torque Calibration Step Monitor: Current and Torque Calibration. Step Restriction: Current.
Extended logging Remote logging Open end configuration for PF6000 and PF8. Custom section folder implemented in Functionality Management System. IXB Tool Configuration - Vibrator New signals
UPDATED content: |
2.17.1 | 09/2021 | NEW content: PF8 controllers are supported. Managing External links in System Administration tab. More filtering options in Tightening program tab. Possibility to delete the old configuration files when exporting controller configuration. More filtering options in Results tab. Information for RabbitMQ is added.
UPDATED content: |
2.17 | 06/2021 | NEW content: PF6000 I/O Hub device is supported. Possible to export program details to .csv format from Controller tab, System Administration tab and Library tab. In multistep, more hold conditions are supported for Step Wait. In multistep, angle control processes is added for Step Restriction RT. In multistep for StepSync, signal for wait type is supported for SteySync. In multistep for StepSync, parameter Angle Window is added for Step Restriction RH.
FlexSystem I/O Hub device is supported. Step Wait: Signal is supported for wait type. More hold conditions are supported. Optional parameter Program Start is added in Tightening Program Properties. Parameter Angle Window is added for Step Restriction RH. Angle control processes is added for Step Restriction RT.
UPDATED content:
DELETED content: |
