1. ToolsTalk 2
2. Configuration
3. Configuration for PF6000

Configuration for PF6000

• Quality Integrated Fastening Accessories (QIF)
• Working with the Batch Sequence Tab
  • Batch Sequence Configuration Workspace
    • Batch Sequence Configuration Menu
    • Adding a New Batch to a Batch Sequence
    • Copying and Pasting a Batch Sequence
    • Exporting a Batch Sequence
    • Importing a Batch Sequence
    • Deleting a Batch in a Batch Sequence
• Working with the Configurations Tab
  • Adding a Configuration
  • Importing a Configuration
  • Deleting a Configuration
  • Accessory Components
    • Output Signal Configuration
    • Input Signal Configuration
    • Input and Output Combination
  • Configuration Types
    • Internal I/O
    • I/O Expander
    • Operator Panel
    • Socket Selector
      • Viewing/Editing or Creating a Socket Selector Configuration
      • Socket Selector Control Switch
    • Stacklight
    • Scanner
    • Indicatorbox
      • Configuring the Indicatorbox
    • Tool Configuration
      • Tool Configuration - Properties Menu
      • Tool Configuration - General Configuration
      • Tool Configuration - Direction Switch
      • Tool Configuration - Function Button
      • Tool LEDs
      • Tool Configuration - Buzzer
      • Configuring the Tool Accessory Bus
        • Configuring the Tool Location System Tag (TLS)
        • Configuring the Extended Human Machine Interface (EHMI)
        • Configuring the ST Selector
    • General Virtual Station
      • Enabling and Disabling the Tightening Settings
      • Configuring Live Result Settings
• Working with the Controller Information Tab
  • Controller Information and IAM Menu
  • Software Menu
  • Licenses
  • Hardware Configuration
  • Export and Import
  • Automated Backup
  • System Health Monitor
  • Server Connection Status
• Working with the Fieldbus and SoftPLC Tab
  • Overview Configuration Tab
    • Fieldbus settings
      • Fieldbus Parameters General
      • Fieldbus parameters for ProfinetIO and ProfinetIO M40
      • Fieldbus parameters for EtherNet/IP and EtherNet/IP M40
      • Fieldbus parameters for DeviceNet
      • Fieldbus parameters for Profibus
      • Fieldbus parameters for CC Link
      • Fieldbus parameters for CC Link IE
    • SoftPLC settings
      • Changing the Offset
    • Fieldbus Virtual Station Mapping Configuration
    • Viewing a Fieldbus Map assigned to a Virtual Station
    • Assigning a Fieldbus Map to a Virtual Station
    • Automatic Placement of Items in the Fieldbus Map
    • Automatic Placement of Fieldbus Maps in the Process Data Frame
  • Fieldbus Overview
    • Fieldbus Configuration Parameters
    • Fieldbus Definitions
  • Fieldbus Requirements
  • SoftPLC Overview
  • SoftPLC Requirements
  • Fieldbus Configuration Tab
    • Creating a New Fieldbus Map
    • Importing a Fieldbus Map
    • Deleting a Fieldbus Map
    • Creating a Fieldbus Signal Configuration
    • Editing or Viewing an Item in the Fieldbus Map
    • Deleting Items From the Fieldbus Map
    • Exporting a Fieldbus Map
  • SoftPLC Configuration Tab
    • Creating a New SoftPLC Project
    • Importing a SoftPLC Project Template
    • Creating SoftPLC User Data
    • Creating SoftPLC Signal Configurations
• Working with the Libraries Tab
  • Libraries - Distribution List
  • Tightening Program Library
    • Tightening Program Library Introduction
    • Tightening Program Library Workspace
    • Tightening Program Library - Adding a Global Tightening Program
    • Tightening Program Library - Deleting a Global Tightening Program
    • Tightening Program Library - Distributing Global Tightening Programs
      • Tightening Program Library - Adding a Global Program to the Distribution List
      • Tightening Program Library - Removing a Global Program Subscription from the Distribution List
    • Tightening Program Library - Updating a Global Tightening Program
  • Global Configurations Library
    • Global Configurations Workspace
    • Global Configurations Library - Creating or Importing a Global Configuration
    • Global Configurations Library - Deleting a Global Configuration
    • Global Configurations Library - Creating a Global Configuration From An Existing
    • Global Configurations Library - Distributing a Global Configuration
    • Global Configurations Library - Removing a Global Configuration Subscription From the Distribution List
    • Global Configurations Library - Editing a Global Configuration
  • FIeldbus Configuration Library
    • Fieldbus Configuration Workspace
    • Fieldbus Configuration Library - Creating or Importing a Global Fieldbus Configuration
    • Fieldbus Configuration Library - Deleting a Global Fieldbus Configuration
    • Fieldbus Configuration Library - Creating a Global Fieldbus Configuration from an Existing Fieldbus Configuration
    • Fieldbus Configuration Library - Distributing a Global Fieldbus Configuration
    • Fieldbus Configuration Library - Removing a Fieldbus Configuration Subscription from the Distribution List
    • Fieldbus Configuration Library - Editing a Global Fieldbus Configuration
    • Fieldbus Configuration Library - Exporting a Global Fieldbus Configuration
  • Global Settings Library
    • Global Settings Library - Creating or importing a Global Event configuration
    • Global Settings Library - Deleting a Global Events configuration
    • Global Settings Library - Distributing a Global configuration
    • Global Configurations Library - Removing a Global Configuration Subscription From the Distribution List
    • Global Settings Library - Editing a Global Event configuration
    • Global Settings Library - Exporting a Global Event configuration
  • Program Templates
    • Program Templates Workspace
    • Importing a Tightening Program Template
  • Controller Configuration Library
    • Controller Library Introduction
    • Controller Library Workspace
    • Controller Configuration Library - Creating a New Controller Template
    • Controller Configuration Library - Importing a Controller Template
    • Controller Configuration Library - Deleting Controller a Template
    • Controller Configuration Library - Creating a Template From an Existing Controller
    • Controller Configuration Library - Distributing a Controller Template
    • Controller Configuration Library - Editing or Configuring a Controller Template
    • Controller Configuration Library - Exporting a Controller Template
  • Global Sync Mode Library
    • Global Sync Mode Library Workspace
    • Global Sync Mode Library - Creating a Global Sync Mode
    • Global Sync Mode Library - Importing a Distributed Sync Mode
    • Global Sync Mode Library - Deleting a Global Sync Mode
    • Global Sync Mode Library - Distributing a Global Sync Mode
    • Global Sync Mode Library - Removing a Global Sync Mode Subscription From the Distribution List
    • Global Sync Mode Library - Editing a Global Sync Mode
• Working with Push Configuration Changes
  • Pushing Configurations to a Controller
  • Reverting Controller Configurations
• Working with the Settings Tab
  • Preferences
    • PIN Settings
      • Configuring the PIN
      • Accessing the Controller When Locked By PIN
      • PIN Code for Station Setup
    • Tool Service Alarms
  • Server Connections
    • Controller Communication with the License Server
    • Controller Communication with the ToolsNet Server
  • Controller Date and Time
  • Events Menu
    • Event Configuration
    • Adding Events to the Library
• Working with the Sources Tab
  • Source Tightening Overview
  • Creating a Source Tightening
  • Creating a Source Batch
  • Significant Positions
    • Configuring Significant Positions to Read in Barcode String
    • Combining Identifier Strings
    • Saved Positions
  • Copying and Pasting a Source Batch or a Source Tightening
  • Exporting a Source Batch or a Source Tightening
  • Importing a Source Batch or a Source Tightening
• Working with the StepSync System
  • Hardware Configuration [TT2]
    • Creating a Hardware Layout Configuration
    • Status
    • Extracting a Hardware Layout Configuration
  • Sync Mode
    • Adding a Sync Mode
    • Handling Tightening Sync Mode Configuration
    • Handling Loosening Sync Mode Configuration
    • Running a Loosening Sync Mode Using the Input Select Loosening
    • Running a Loosening Sync Mode Using Input Start Loosening
    • Copying and Pasting a Sync Mode
    • Exporting a Sync Mode
    • Importing a Sync Mode
    • Deleting a Sync Mode
  • StepSync Signals
    • Input Signals
    • Output Signals
    • Input/Output Signals
    • Input Signals: Sub-signals
      • Channel Command - 10054: Sub-signals
        • Continue Step
        • Force Bolt ID
        • Force Pset
        • Inhibit No Result
        • Inhibit NOK Result
        • Inhibit OK Result
    • Output Signals: Sub-signals
      • Bolt Tightening Status - 79: Sub-signals
        • All Signals
        • Cycle Running
        • In Selected Mode
        • Inhibited
        • Last Cycle Angle High
        • Last Cycle Angle Low
        • Last Cycle Hardware Error
        • Last Cycle Inhibited
        • Last Cycle NOK
        • Last Cycle Not Included
        • Last Cycle OK
        • Last Cycle Terminated By Other
        • Last Cycle Timeout
        • Last Cycle Torque High
        • Last Cycle Torque Low
        • Last Loosening NOK
        • Last Loosening OK
        • Last Tightening NOK
        • Last Tightening OK
        • Loosening Running
        • Running Repair
        • Running Termination
        • Tightening Running
        • Tool Led Mirror Green
        • Tool Led Mirror Red
        • Tool Led Mirror Yellow
        • Waiting To Continue
      • Channel Tightening Status - 80: Sub-signals
        • All Signals
        • Cycle Running
        • In Selected Mode
        • Inhibited
        • Last Cycle Angle High
        • Last Cycle Angle Low
        • Last Cycle Hardware Error
        • Last Cycle Inhibited
        • Last Cycle NOK
        • Last Cycle Not Included
        • Last Cycle OK
        • Last Cycle Terminated By Other
        • Last Cycle Timeout
        • Last Cycle Torque High
        • Last Cycle Torque Low
        • Last Loosening NOK
        • Last Loosening OK
        • Last Tightening NOK
        • Last Tightening OK
        • Loosening Running
        • Running Repair
        • Running Termination
        • Tightening Running
        • Tool Led Mirror Green
        • Tool Led Mirror Red
        • Tool Led Mirror Yellow
        • Waiting To Continue
      • Channel Hardware Status - 81: Sub-signals
        • All Signals
        • Drive Disconnected
        • Drive Temp High
        • Drive Voltage Error
        • Emergency Stop Active
        • General Hardware Error
        • Motortune Needed
        • Tool Cable Invalid
        • Tool Disconnected
        • Tool Temp High
        • Torque Transducer Error
  • Sync points
  • Working with Fieldbus, SoftPLC and Acyclic Data Tab
    • Fieldbus Overview
      • Fieldbus Configuration Parameters
      • Fieldbus Definitions
      • Fieldbus Data Types
      • Fieldbus Sizes
    • Overview Configuration Tab
      • Fieldbus settings
        • Fieldbus Parameters General
        • Fieldbus parameters for DeviceNet
        • Fieldbus parameters for EtherNet/IP and EtherNet/IP M40
        • Fieldbus parameters for ProfinetIO and ProfinetIO M40
        • Fieldbus parameters for Profibus
        • Fieldbus parameters for CC Link
        • Fieldbus parameters for CC Link IE
        • Acyclic Data in General Fieldbus Settings
          • Adding Data Instance Size
            • Deleting an Acyclic Fieldbus Mapping
      • SoftPLC settings
        • Changing the Offset
      • Virtual Station Mapping Configuration
        • Adding a Fieldbus Mapping
        • Adding an Acyclic Fieldbus Mapping
          • Editing Start and End Instances
        • Viewing a Fieldbus Map assigned to a Virtual Station
    • Fieldbus Configuration Tab
      • Creating, Importing and Deleting a Fieldbus Map
        • Creating a New Fieldbus Map
        • Importing a Fieldbus Map
        • Deleting a Fieldbus Map
      • Creating a Fieldbus Signal Configuration
        • Fieldbus Configuration Parameters
        • Async Data
          • Tightening Results in Async Data
          • Configuring Async Data
      • Understanding the Fieldbus Configuration and the Fieldbus Map
      • Automatic Placement of Fieldbus Maps in the Process Data Frame
      • Automatic Placement of Items in the Fieldbus Map
      • Editing or Viewing an Item in the Fieldbus Map
      • Deleting Items From the Fieldbus Map
      • Exporting a Fieldbus Map
    • Working with Acyclic Fieldbus Configuration
      • Acyclic Data Configuration Overview
        • Adding a New Acyclic Data Configuration
          • Acyclic Data Configuration Menu
          • Configure Acyclic Data
            • Common Area Overview
              • Adding Acyclic Result Configuration in Common Area
              • Deleting Acyclic Result Configuration from Common Area
            • Bolt or Channel Area Overview
              • Adding Acyclic Result Configuration in the Bolt or Channel Area
              • Creating Copies in the Bolt or Channel Area
              • Deleting Acyclic Result Configuration from Bolt or Channel Area
      • Example of a Tightening Result
    • SoftPLC Configuration Tab
      • SoftPLC Overview
      • Creating SoftPLC Signal Configurations
      • SoftPLC Virtual Station Mapping Configuration
      • Creating a New SoftPLC Project
        • Creating SoftPLC User Data
        • Setting Up SoftPLC Communications
      • Importing a SoftPLC Project Template
  • Working with the Sources Tab
    • Source Tightening Overview
    • Creating a Source Tightening
    • Creating a Source Batch
    • Significant Positions
      • Configuring Significant Positions to Read in Barcode String
      • Combining Identifier Strings
      • Saved Positions
    • Copying and Pasting a Source Batch or a Source Tightening
    • Exporting a Source Batch or a Source Tightening
    • Importing a Source Batch or a Source Tightening
  • Enabling and Disabling the Tightening Settings
• Working with the System Administration Tab
  • Scheduled Tasks
    • Administrating Scheduled Tasks
    • Controller Selection
    • Export Controller Configuration
    • Import Controller Configuration
    • Upload Controller Software
    • Database Maintenance
    • Push Controller Configuration
    • Backup License Distributions
      • Restoring the License Distributions from a Backup
  • Controller Software and Data Management
    • Introduction to Controller Software and Data Management
    • Exporting and Importing
    • Updating Controller Software
    • Switching Controller Software
    • Generating a Controller Software Report
    • Managing Custom Sections
  • Functionality Management System (FMS)
    • Functionality Management System Introduction
    • Functionality Management System Definitions
    • Editing the Distribution of License Types and Features
    • Distribution of Feature Items
      • Editing the Distribution of License Types and Features
    • Managing License Distributions
  • User Groups
    • User Groups Overview
    • User Group Prerequisites
    • Creating, Deleting or Editing a User Group
    • User Group Permissions Menu
    • Folder User Rights
    • Controller User Rights
    • Global Functions User Rights
  • Program Approval
    • Sending a Program for Approval
    • Program Approval Workspace
      • Approval Statuses
      • Approving or Rejecting a Program
• Working with the Tightening Program Tab
  • Tightening Strategies
    • TurboTight
    • Quick Step
    • Two Step
    • Three Step
    • External Result
      • Results from External Tools
        • Setting Up an External Tool
        • Configuring the External Results Without Tool Connected
    • Pulsing Tool Strategies
      • Pulse Tightening Program
      • Pulse Tightening with Direct Driven Electrical Tools
      • Tightening using the TensorPulse Program
    • Trigger Lost
    • STwrench Strategies
      • STwrench introduction
      • STwrench Start Step Parameters
      • STwrench Rundown Step Parameters
      • STwrench Tightening Step Parameters
      • STwrench Stop Step Parameters
      • STwrench Loosening
    • Multistep Tightening Strategy
      • Tightening Program Menu
      • Properties Sub-Tab
      • Adding a Multistep Program
      • Tightening Editor
        • Tightening Steps
          • Trace Setting
        • Step Monitors
        • Step Restrictions
        • Deleting a Multistep Program
        • STB Tools and Multistep
        • Result Reporters
        • Multistep Template
  • Step Configuration Stages
    • True Angle Compensation
    • Current Monitoring
    • Start Stage
    • Rundown Stage
      • Rundown Introduction
      • Rundown Selftap, Thread Cutting To Torque
      • Rundown Torque Limits
      • Rundown Angle Limits
      • Post View Torque
      • Rundown Parameters
      • Time Monitoring
        • Detailed NOK reason
    • Stop Stage
    • Loosening a Screw
    • Stage Parameter Descriptions
      • Target Torque Limits
      • Target Angle Limits
      • Torque Compensation
      • Residual Torque Correlation Factor
      • Premature Torque Loss Detection
  • Creating a Tightening Program
  • Tightening Program Configuration - General Parameters
    • Tightening Program History
    • Attachment Tuning
  • Importing a Tightening Program
  • Deleting a Tightening Program
  • Copying and Pasting a Tightening Program
  • Global Tightening Program
    • Converting a Local Tightening Program into a Global Tightening Program
    • Converting a Global Tightening Program into a Local Tightening Program
  • Comparing Tightening Programs
• Working with the Tools Tab
  • Handheld Tool Configuration
  • Tools - QA calibration
• Working with the Virtual Station Tab
  • Virtual Station Overview
  • Assigning License Types and Features to a Virtual Station
  • Assigning a Tool to a Virtual Station
  • Assigning a Task to a Virtual Station
  • Assigning Accessories to a Virtual Station
    • Adding an accessory to a Virtual Station
    • Unassigning an Accessory from a Virtual Station
    • Configuring I/O
  • Assigning a General Virtual Station Configuration
  • Tool Configuration in a Virtual Station
  • Virtual Station - Properties
  • Fieldbus Mapping in a Virtual Station
    • Fieldbus Diagnostics
  • Virtual Station - Protocols
    • Open Protocol
  • Virtual Station - Diagnostics
    • Digital Signal Diagnostics
    • Normal Operations
    • Monitor Digital Signals
    • Force Digital Signals
  • Virtual Station - Manual mode
    • Configuring Manual Mode
    • Triggering Manual Mode