Intended Use of the Screw Feeding Tightening Module

This product is a part of a bigger system and designed for installing and removing threaded fasteners in wood, metal or plastic. No other use permitted.

The partly completed machine is a handheld screw fastening system intended for producing screw connections. Screw feeding is proceeded automatically by a Screw Feeding Unit. The Screw Feeding Tightening Module and the Screw Feeding Unit are powered and controlled by the Power Focus 6000.

The screw fastening system has to be used only indoors.
The screw fastening system may only be put into operation with the system components described here.

Permitted use for the individual components of the partly completed machine

Screw Feeding Tightening Module with Screw Feeding Front Part and Driving Tool - Handheld installation of screw connections that require a defined torque or a defined angle of rotation.
Cables (electrical) - Use for the electrical supply and control of the screw fastening system.
Hoses (pneumatic) - Use for supplying the Screw Feeding Tightening Module with pneumatic energy, coming from the Screw Feeding Unit.
Feeding Tube - Use for the transport of fasteners from the Screw Feeding Unit to the feeding head of the Screw Feeding Tightening Module.
Power Focus 6000 - Use for power supply and control and monitoring of the screw fastening system.
Screw Feeding Unit - Use for feeding the Screw Feeding Tightening Module with screws.