IT - Impulse Tighten to Torque / Loosen to Torque
Tools |
|---|
IXB |
Impulse steps are valid only for IPB-P tools.
Impulse Tighten to Torque
This step generates tightening pulses in the forward direction, until the torque target is reached.
Impulse Loosen to Torque
This step generates tightening pulses in the backward direction, until torque is below torque target.
Parameter | Description |
|---|---|
Torque Target - Ts | Torque Target must range from 0 through the maximum torque of the tool. |
Pulse Energy - Pe | Pulse Energy is used to control the amount of energy/current in each pulse. Pulse Energy must range from 10% through 100 %. |
