Configuring a Stacklight
The stacklight can be configured to display the I/O signals from the tool.
The stacklight can be customized as follows:
A stack of four lights. One optional light can be added to this stack. You can also customize the order and the color of lights.
Two positions, A and B, which can be customized with indicator lamps or switches.
A buzzer placed on the side of the box that has a fixed frequency of 3000 Hz. The buzzer can be configured to activate on any tightening tool signal.
Two external outputs, two external inputs and a connector for external power.
To set up the Stacklight, refer to the CAN converter Product Instructions.
Go to Configurations in the home menu and select Stacklight. Select Edit.
For each stacklight position, select lamp color, signal type and duration.
For position A-B, select the type of lamp, button or switch and select the signal type.
Configure the buzzer and external digital inputs and outputs if needed.
