Viewing Transducer Information
A tool can have several torque and angle transducers depending on tool type. An image shows the position of the transducers.
Select Details for more information about the torque or angle transducers. Depending on transducer type the following information can be available.
Information | Description |
---|---|
Enabled | Indicates if the transducer is enabled. |
Gear ratio | The gear ratio between the transducer and the out-going shaft of the tool. |
Wind-up | The wind-up compensation factor for the angle transducer. |
Information | Description |
---|---|
Enabled | Indicates if the transducer is enabled. |
Serial Number | Serial number of the transducer as a string. |
Article Number | Article number of the transducer as a string. |
Calibration Value | Calibration value for the transducer expressed in Nm. |
Go to Integrated Controller Tool in the home menu and select Tool in the left pane.
Expand the Transducer Information field to view the calibration values of the Main and, if applicable, Secondary torque transducers.