Configuring an I/O Expander or an I/O Hub
To set up an I/O Expander, refer to the I/O Expander Product Instructions.
To set up an I/O Hub, refer to the I/O Hub Software User Guide.
Go to Configurations in the home menu and select I/O Expander in the left pane. Select Edit.
Two lists are displayed, one for Inputs and one for Outputs.
To set a channel to an input, select the required channel in the Inputs list. Choose signal type in the appearing list.
To set a channel to an output, select the required channel in the Outputs list. Choose signal type in the appearing list.
The I/O Hub has 8 channels compared to the I/O Expander which has 16. When configuring an I/O Hub, make sure that no channel is set to both an input and an output signal at the same time. One of the corresponding input and output channels must be configured to None. Select None in the appearing dialog box. Close the appearing list of items without selecting anything.
