Creating a Tightening Program
Go to Tightening in the home menu.
Select the plus icon.
In the Choose Operation Mode window, select Tightening.
Open the Properties window and type in a valid Maximum Torque Limit for the specific tool. Type Enter. Close the Properties window.
Open the Steps pane on the right and drag and drop the steps to create a tightening program.
Set Monitors and Restrictions for each step as applicable and press the Enter key.
The tightening program must have a loosening program configured.
Go to Tightening in the home menu.
Select the plus icon.
In the Choose Operation Mode window, select Loosening.
Open the Properties window and type in a valid Maximum Torque Limit for the specific tool. Type Enter. Close the Properties window.
Open the Steps pane on the right and drag and drop the steps to create a loosening program.
Set Monitors and Restrictions for each step as applicable and type Enter.
Go to Tightening in the home menu and select a tightening program from the list.
Expand Properties by selecting the arrow.
Under General settings, select Loosening Program and choose a loosening program in the list. Type Enter.
