Configuring Alarms
Alarms are set to control when to perform maintenance or calibration of the tool.
The tool service interval, calibration details, and other relevant information is found in the Integrated Controller Tool > Tool menu.
Set a maintenance alarm
Go to Settings in the home menu and select Alarms in the left pane.
In the Maintenance field, set the following parameters:
Parameter
Description
Service indicator alarm
On/Off: Enables/Disables an alarm for when the service interval of the tool is reached.
Tool lock after alarm
On/Off: Enables/Disables a lock of the tool when the service interval is reached.
To set a calibration alarm:
Go to Settings in the home menu and select Alarms in the left pane.
In the Calibration field, set the Calibration alarm to On/Off to enable/disable it.
