TLS Tag

The Tool Location System (TLS) tag is a tool accessory. The TLS tag is installed on the tool and connected to the tool accessory bus. The TLS tag is part of the Ubisense positioning system and is handled independently from the tool. In addition to the positioning, the TLS tag can be used to provide information to the operator. Selected output signals can generate different LED light combinations.

Up to 10 different output signals can be mapped to a light priority.

If there are two simultaneous signals, the signal with the highest priority takes precedence. When two signals with the same priority trigger the LED, the first signal received takes precedence.

TLS Tag Configuration Parameters

Parameter

Description

Signal

Select a signal to trigger the LED light from a shortcut menu.

For a signal of the type Event, select the duration of the signal.

Color

Select a color for the LED.

Priority

10 priority levels are available for the sounds where one (1) is the highest priority level. Default priority level is five (5).

An output signal can be of type Event or of type State.

A state signal is active as long as the state is active.

An event signal is active during programmable time.