Adapter Tightening Instructions
Crowfoot | Bearing Shell Fork Adapter  | Fixed Index Adapter  | Nut for Fix Index Adapter  |
OOT-25 | Acc. to tool spec. | 40 Nm Loctite 2701 | 30 Nm Loctite 243 |
OOT-35 | Acc. to tool spec. | 50 Nm Loctite 2701 | 30 Nm Loctite 243 |
OOT-50 | Acc. to tool spec. | 60 Nm Loctite 2701 | 30 Nm Loctite 243 |
OOT-70 | Acc. to tool spec. | 90 Nm Loctite 2701 | 40 Nm Loctite 243 |
OOT-100 | Acc. to tool spec. | 120 Nm Loctite 2701 | 40 Nm Loctite 243 |
Crowfoot alignment
Find the spline engagement closest to the specified position (angle).
Tighten the adapter to specified torque.
If the closest spline engagement is not a specified position (angle), tighten the adapter slightly more to the driving tool to align the driving tool and GFA.
