Revision history

Software version

Change

07.04x

Tools parameters updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

07.03x

  • Quick Programming - General Information updated (for more information, see "STpad Configuration Manual").

07.02x

  • Pairing STwrench updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Pairing IRC-Connect updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

07.01x

  • Tool parameters updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Controller parameters updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Calibrating Open Protocol - General information added STpad Operation Manual").

07.00x

  • Trace simulation added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Requirements for raw traces files added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Test run added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Connecting the device to STpad cable adapter added (for more information, see STpad Configuration Manual").

  • STpad cable adapter connected transducers added (for more information, see STpad Configuration Manual").

  • IRC-Connect connected transducers added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Adding a Tool / Multistep / Joint / Visual / Dimensional inspection updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Joint parameters updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Measuring devices updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Main data updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Configuring the Tool tracker updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • General settings updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Pairing STwrench updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Pairing the STwrench fails (for more information, see "STbench with PC Troubleshooting and Service Manual / STpad Troubleshooting and Service Manual").

06.03x

  • Running a Tool inspection updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Enabling the Tool tracker updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Quick programming updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Label updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

06.02x

  • Trace category updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Logging configuration updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Export all added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

06.01x

  • Home updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Route updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Edit Route updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Tool inspections updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Cm/Cmk ISO parameters updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • ISO 6789-2:2017 parameters updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Calibration parameters updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Barcode identifier added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Export STbench dumps added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Measure screen updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • License updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Restore updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Maximum number of application items added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Peak strategy updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Glossary updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

06.00x

  • Tool parameters updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Searching a Tool updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Connected transducers updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Label updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

04.05x

  • Searching a Tool/Joint/Part/Result/Route/in a Route updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Viewing the details of the inspection result updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Links added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Common settings updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Tool inspections operator guidance updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Summary for VDI/VDE 2456-2 updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Front view updated ( for more information, see "STpad Operation Manual").

04.04x

  • Navigating a forced by piece route added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Running a forced by inspection route added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Navigating a forced by inspection route added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Filtering the routes using the custom fields added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Searching a Route/Tool/Joint/Part/Measuring device/Controller added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Tool inspections parameters updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Tool inspections summary categories updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Configuration menu updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Common settings updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Measure screen added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Reaction bar added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Exporting STbench logs added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Measure angle from (Direct driven strategy) added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

04.03x

  • SPC dimensional parameters updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Cp/Cpk dimensional parameters updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Searching in a route updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Navigating a forced by piece route added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Viewing the details of the inspection results updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Calibrating generic controller updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Running tool inspections updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Results category (tool inspections) updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Picture inspection and Instructions inspection parameters added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Results category for Picture inspection and Instructions inspection added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • General settings updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Verification code added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Cm/Cmk ISO parameters (Tool check) updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • SPC parameters updated (Tool check) updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • SPC rules updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • SPC, results, limits and rules updated (for more information, "STbench with PC Configuration Manual / STpad Configuration Manual").

  • SIGOP/SCOUP integration added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Basic maintenance updated (for more information, see "STpad Operation Manual").

  • Troubleshooting updated (for more information, see "STpad Troubleshooting and Service Manual").

04.02x

  • General manual update (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Filtering a route added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Results updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Tool inspections updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Filtering the results updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Exporting the results added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Tool parameters updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Summary for JJF 1610:2017 added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • SPC rules updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • JJF 1610:2017 parameters added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Summary for JJF 1610:2017 added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • General settings updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Cam-over strategy added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Strategies parameters updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

04.01x

  • General manual update ("STbench with PC Configuration Manual / STpad Configuration Manual").

  • ISO 6789-2:2017 added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Tool parameters updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Traceability tag updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Open Protocol added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

04.00x

  • Route updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Results updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Summary category for SPC and ISO 6789 updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Adding a visual check inspection updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Adding a dimensional check updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Connected transducers added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Restore added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Exporting log added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Tool check testing updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

03.01x

  • Searching a Route updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Editing a tool updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Tool inspections updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Results category updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Summary category for Cm/Cmk and SPC updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Trace category updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Joints updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Joint inspections updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Part updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Part inspections updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Summary category for Cp/Cpk and SPC (joint) added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Users added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • General settings added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Using for the first time updated (for more information, see "STpad Operation Manual).

  • Technical specification updated (for more information, see "STpad System Overview Manual).

  • Troubleshooting updated (for more information, see "STpad Troubleshooting and Service Manual").

03.00x

  • Running a Route updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Dimensional inspection added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Pairing and connecting IRC-Connect updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Controllers updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Quick programming updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • SPC rules updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Label printing updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Tool testing added (for more information, see "STpad Configuration Manual).

  • Joint testing added (for more information, see "STpad Configuration Manual).

  • Strategies added (for more information, see "STpad Configuration Manual).

  • Glossary added (for more information, see "STpad Configuration Manual).

  • Calibration Power Focus updated (for more information, see "STpad Operation Manual).

  • Calibration PowerMACS updated (for more information, see "STpad Operation Manual).

  • Calibration Generic controller updated (for more information, see "STpad Operation Manual).

  • Technical specification updated (for more information, see "STpad System Overview Manual).

02.00x

  • Security windows machine added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • General information updated (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Parts added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Visual inspection (attribute, binary and dimensional) added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Cm/Cmk and SPC only angle inspection added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual").

  • Technical specification updated (for more information, see "STpad System Overview Manual).

  • Front view updated (for more information, see "STpad Operation Manual).

  • LED status updated (for more information, see "STpad Operation Manual).

  • Side view updated (for more information, see "STpad Operation Manual).

  • General information updated (for more information, see "STpad Operation Manual).

  • General information updated (for more information, see "STpad Troubleshooting and Service Manual").

01.03x

  • GDPR Compliance (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual"/ "STpad System Overview Manual" / "STpad Operation Manual" / "STpad Troubleshooting and Service Manual")

  • VDI/VDE 2645-2 added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual")

  • Cp/Cpk inspection added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual")

  • SPC (joint) inspection added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual")

  • Pairing and connecting STwrench added (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual")

01.02x

  • Results list (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual")

  • Calibration inspection (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual")

  • Controllers (for more information, see "STbench with PC Configuration Manual / STpad Configuration Manual")

  • Calibrating the Power Focus (for more information, see "STbench Operation Manual / STpad Operation Manual")

  • Calibrating the Power MACS (for more information, see "STbench Operation Manual / STpad Operation Manual")

  • Calibrating the generic controllers (for more information, see "STbench Operation Manual / STpad Operation Manual")

01.01x

  • First edition of "STpad Configuration Manual".

  • First edition of "STpad System Overview Manual".

  • First edition of "STpad Operation Manual".

  • First edittion of "STpad Troubleshooting and Service Manual".