1. Power Focus XC
2. Configuration
3. Web GUI

Web GUI

• Working with the Tightening Tab
  • Tightening Programs
    • TurboTight
    • Quick Step
    • Two Step
    • Three Step
    • STwrench
      • STwrench Start Step Parameters
      • STwrench Rundown Step Parameters
      • STwrench Tightening Step Parameters
      • STwrench Loosening
      • STwrench Stop Step Parameters
    • Pulsing Tool Strategies
      • Pulse Tightening Program
      • Pulse Tightening with Direct Driven Electrical Tools
      • Tightening using the TensorPulse Program
      • Impulse Single Step Tightening Program
    • Rotate
    • External Result
      • Running the External Result Tightening Strategy with a Tool Connected
    • Tightening Program and Error Reporting Validation
      • Validation Error Reporting
      • Validate a Tool with a Tightening Program
    • Tightening Program Tool Compatibility Table
  • Multistep Programs
    • Multistep GUI Interface
    • Tightening Steps
    • Step Monitors
    • Step Restrictions
    • Result Reporters
    • Adding a Multistep Program
    • Deleting a Multistep Program
    • Settings for a Multistep Program
    • STB Tools and Multistep
  • Step Configuration Stages
    • Start Stage
      • Direction
      • Soft Start
      • Rehit Detection
      • Current Monitoring
      • TrueAngle Compensation
    • Rundown Stage
      • Selftap
      • Rundown Torque Limits
      • Rundown Angle Limits
      • Post View Torque
      • Rundown Complete
    • Stop Stage
    • Loosening a Screw
    • Stage Parameter Descriptions
      • Target Torque Limits
      • Target Angle Limits
      • Torque Compensation
      • Residual Torque Correlation Factor
      • Trigger Lost
  • Tightening Program Configuration - General Parameters
    • Name
    • Strategy
    • Target
    • Time Monitoring (elapsed time)
    • Attachment Tuning
• Working with the Batch Sequence Tab
  • Batch Sequence Settings
  • Batch Configuration
• Working with the Sources Tab
  • Source Tightening
    • Creating a Source Tightening
  • Source Batch Sequence
    • Creating a Source Batch
    • Configuring Significant Positions to Read in Barcode String
    • Combining Identifier Strings
• Working with the Tool Tab
  • Tool Information
  • Tool Connection
  • Tool Health
  • Tool Maintenance
  • Tool Calibration
    • Preparing the Calibration
    • Calibrating the Tool
    • QA Calibration
    • Calibrating a Tool Through the STa6000 or STpad
  • Tool Diagnostics
  • Zero Position
  • Tool Motor Tuning
  • Front End Configuration
  • Pairing a Wireless Tool to a Controller
• Working with the Virtual Station Tab
  • Creating a Virtual Station
  • Deleting a Virtual Station
  • Assigning Licenses to a Virtual Station
  • Unassigning licenses from a Virtual Station
  • Connecting a Tool to a Virtual Station
  • Configuring Task Window in a Virtual Station
    • Configuring Manual Mode in a Virtual Station
      • Entering and Leaving Signals
  • Configuring Protocols Window in a Virtual Station
  • Configuring Accessories Window in a Virtual Station
    • Digital Signal Diagnostics
    • Diagnostics Configuration
    • Normal Operations
    • Monitor Digital Signals
    • Force Digital Signals
• Working with the Configurations Tab
  • Tool Configuration
    • Configuration of the Function Button
    • Configuration of the Tool LEDs
    • Configurtion of the Direction Switch
    • Configuration of the Buzzer
    • General Settings
      • Trace Configuration
      • TAG Check
      • TAG Selection
    • Configuration of the Start Condition
      • Start Request
      • Start Source
    • Configuration of the Accessory Bus
      • ST Selector
      • TLS Tag
      • EHMI
      • Scanner
    • Configuration of the Open End
  • Digital Signals
    • Input Signals
    • Output Signals
  • Selector Configuration
    • Socket Selector Configuration
      • Configuring a Socket Selector
      • Connecting a Socket Selector to a Virtual Station
    • Setting up a Selector 6 via Ethernet Cable/Wireless
  • General Virtual Station
    • Configuring Live Result Presentation Settings
      • Show Final Torque with PrT Compensation: ON / Show PrT Compensation Value: ON
      • Show Final Torque with PrT Compensation: OFF / Show PrT Compensation Value: ON
      • Show Final Torque with PrT Compensation: OFF / Show PrT Compensation Value: OFF
      • Show Final Torque with PrT Compensation: ON / Show PrT Compensation Value: OFF
    • Configuring the storage of Final Torque and Trace
  • Configuration of the Scanner
    • Scanner Configuration
      • Configuring the Scanner
      • Valid Scanners
• Working with the Controller Tab
  • Intelligent Application Module
  • Software
    • Updating Controller Software through USB
    • Updating Controller Software through Web GUI
  • Hardware
    • Health
  • Export/Import
    • Exporting "All Controller Information"
    • Exporting "Settings and Configurations"
    • Exporting "Logs from Connected Tools"
    • Exporting "Results"
    • Exporting "System Logs and Information"
    • Importing Controller Configurations and Settings
• Working with the Settings Tab
  • Configuration of the Network
    • Accessing the Controller On Lan
    • Accessing the Controller Through a Web GUI
    • Accessing the Controller Through a Mobile GUI
  • Configuration of the Protocol
    • Configuring the ToolsTalk Connection
    • Configuring the ToolsNet Connection
    • Configuring a License Manager
    • Configuring the Remote Logging Connection
  • Configuration of the Preferences
    • Configuring the Date and Time
    • Configuring the Displayed Controller Language
    • Configuring the Displayed Torque Unit
    • Configuring the Displayed Temperature Unit
    • Configuring the Startup Screen
    • Factory Port Accesibility
  • Configuration of the Tool Alarms
  • Configurations of the Events Settings
  • Configuration of the Results
  • Configuration of the Extended Logging
    • Configuring the Log Groups
  • Reset
    • Factory Reset Controller
    • Clear Results