Dimensions and Weight

Product	L* [mm]	K [mm]	X [mm]	Y [mm]	Z [mm]	H [mm]	Weight [kg]	E [mm]
STRwrench Controller Advanced + smartHEAD 15 Nm	374	437	145	278	13.4	356	1.57	9x12
STRwrench Controller Advanced+ smartHEAD 80 Nm	374	437	145	278	13.4	356	1.6	9x12
STRwrench Controller Advanced + smartHEAD 250 Nm	499	554	262	278	13.4	473	2.2	14x18
STRwrench Controller Advanced + smartHEAD 250 Nm Long	699	754	462	278	13.4	673	2.31	14x18
STRwrench Controller Advanced + smartHEAD 400 Nm	820	874	583	278	13.4	794	2.95	14x18
STRwrench Controller Advanced + smartHEAD 500 Nm	833	874	583	278	13.4	794	3.4	14x18
STRwrench Controller Advanced + smartHEAD 600 Nm	1272	1352	1061	278	13.4	1339	4.78	21x26
STRwrench Controller Advanced + smartHEAD 1000 Nm ALU	1585	1470	1178	278	13.4	1456	8.58	Ø28
STRwrench Controller Advanced + smartHEAD 1000 Nm CAR	1707	1593	1301	278	13.4	1579	6.55	Ø28

*Dimension L is the standard arm, measured from the center of the handle to the center of the end fitting tool. This information is used to calculate the Torque Correction Coefficient when an extension is used. This dimension is calculated for the standard Atlas Copco end fitting tools used during calibration (L-H); if a different end fitting tool is used, this measure must be recalculated.
For more information, refer to STRwrench QA Inspector Software User Guide.