SPC (tool)
Below are the items of the SPC (tool) inspection result details card:
Inspection: name of the inspection.
Route: name of the route linked to the inspection.
Result date: date of the inspection.
Measuring device: measuring device used to do the inspection.
Target object: name of the tool under control.
Operator: Name of the operator that did the inspection.
It is shown if the measuring device manages the users.
Status: below are the available options, depending on the status of the inspection:
Partial: the inspection is closed before the batch is completed. The test can be completed later on.
Completed: the inspection is closed after the batch is completed.
Abandoned: the inspection is not completed but it is manually closed. The test cannot be completed later on.
Results status: below are the available options, depending on the result status of the inspection:
OK: all the results of the completed subgroup or completed batch are OK.
NOK: at least one result of the completed subgroup or completed batch is NOK.
No status: if the ongoing subgroup is not completed, the status of the batch cannot be evaluated and is left blank.
X/R Chart
X chart: chart of the average values. The last point is the average of the last subgroup. The previous points are the average values of the subgroups done before.
In the graphs, the lines indicate:
the upper and lower limits (red lines)
the target values (green line)
target value +/- 3σ (blue lines) (σ is the standard deviation)
Click the chart to open a full screen graph.
R chart: chart of the range (maximum measured values - minimum measured values).
The last point is the range of the last execution. The previous points are the range values of the execution done before.
In the graphs, the lines indicate:
the upper and lower limits (red lines)
the target values (green line)
target value +/- 3σ (blue lines) (σ is the standard deviation)
Click the chart to open a full screen graph.
SPC Rules
List of the rules applied with the result (OK/NOK/NA) per each rule.
Traceability: in this table the traceability tags configured in the route linked to the inspection are shown. In particular, the name, the level and the values of each configured traceability tag are displayed.
