1. QA Supervisor
2. Features
3. Inspections menu
4. Results
5. Inspection result details card
6. Picture

Picture

Below are the items of the Picture inspection result details card:

• Inspection: name of the inspection.

• Route: name of the route linked to the inspection.

• Result date: date of the inspection.

• Measuring device: measuring device used to do the inspection.

• Operator: name of the operator that did the inspection.

• Status: below are the available options, depending on the status of the inspection:

  • Partial: the inspection is closed before the batch is completed. The test can be completed later on.

  • Completed: the inspection execution is closed after the batch is completed.

  • Abandoned: the inspection execution is not completed but it is manually closed. The test cannot be completed later on.

• Results status: below are the available options, depending on the result status of the inspection:

  • OK: all the results are OK.

  • NOK: at least one result is NOK.

• Picture: image acquired during the test.