1. QA Supervisor
2. Features
3. Inspections menu
4. Results
5. Inspection result details card
6. Tool model uncertainty

Tool model uncertainty

Below are the items of the ISO 6789:2017 inspection result details card:

• Result date: date of the inspection result.

• Measuring device: measuring device used to do the inspection.

• Status: below are the available options, depending on the status of the inspection:

  • Partial: the inspection is closed before the batch is completed. The test can be completed later on.

  • Completed: the inspection execution is closed after the batch is completed.

  • Abandoned: the inspection execution is not completed but it is manually closed. The test cannot be completed later on.

• Tool to inspect: name of the inspected tool.

• Tool model: name of the tool model.

• Uncertainty test type: below are the available options:

  • b_rep: variation due to the reproducibility.

  • b_od: variation due to the geometric effects of the output drive of the torque tool.

  • b_int: variation due to the interference between the output drive and the calibration system.

  • b_l:variation due to the variation of the force loading point.

• Tightening direction: tightening direction of the test. The available options are:

  • CW: clockwise direction.

  • CCW: counterclockwise direction.

• Coefficient value: uncertainty value calculated for the uncertainty test type.

• Number of phases: number of phases of the test.