1. QA Supervisor
2. Features
3. Inspections menu
4. Multisteps
5. Multistep parameters

Multistep parameters

• Name (*): type the name of the multistep.

• Description (*): type the description of the multistep.

• Tightening direction (*): select one of the following options:

  • CW: clockwise direction.

  • CCW: counterclockwise direction.

• Editor box: in the box, configure the steps sequence as follows:

  • On the right of the Editor box, from the Toolbox, drag an item to the Editor workspace.

    The available items are as follows:

    • Torque: measured torque in the tightening direction selected by tightening direction option button.

    • Angle: measured torque in the tightening direction selected by tightening direction option button.

    • Torque loosening: measured torque in the opposite direction of the tightening direction selected by tightening direction option button.

    • Angle loosening: measured torque in the opposite direction of the tightening direction selected by tightening direction option button.

    In case of multistep, select Torque as the first step.

  • In the Editor workspace, click the item.

  • On the bottom of the Editor workspace, a Data dialog box that configures the item selected is displayed.

    Configure the Data dialog box.

    On the bottom of the Data dialog box, click Delete to delete the step configuration.

Items marked with an asterisk (*) are required.