Revision History

item

item

none

3.10

06/2023

• NEW content

• Configuring the Controller as a Wireless Access Pointadded to Configuration of the Network

• Troubleshooting Matrixadded to Troubleshooting and Service

• UPDATED content

• Tool DiagnosticsDiagnostic test added to Tool Diagnostics

• PrT - Prevailing Torqueadded in Configuration for FlexSystem and StepSync

• Exporting Logs from Connected ToolsQST-M added

• Event Codesupdated with battery status

• Configuring Protocols Window in a Virtual Stationupdated with communication timeout value.

3.9

01/2023

• NEW content

• Configuration > Working with the Too Tab > Tool Diagnostics

• Configuration > Working with the Tool Tab > Zero Position

• Configuration > Working with the Settings Tab > Configuration of IxB Connect

• Configuration > Working with the Configurations Tab >Tool Configuration > Configuration of the Dual Transducers

• UPDATED content

• Configuration > Working with the Controller Tab > Exporting "Systems Logs and Information"

• Configuration > Working with the Controller Tab > Export/Import > Exporting logs from Connected Tools

• Configuration > Working with the Tightening Tab > Multistep Programs > Tightening Steps

• Configuration > Working with the Tightening Tab > Multistep Programs > Step Monitors

• Configuration > Working with the Configurations Tab > General Virtual Station

• Configuration > Working with the Settings Tab > Configuration of the Network > Configuring the Firewall

3.8

06/2022

NEW content:

• Configuration > Working with the Controller Tab > Export/Import > Exporting "System logs and information"

UPDATED content:

• Configuration > Working with the Controller Tab > StepSync

• Configuration > Working with the Controller Tab > StepSync > StepSync Tightenings

• Configuration > Working with the Controller Tab > StepSync > StepSync Signals

• Configuration > Working with the Tightening Tab > Multistep Programs (new filterable tables for tightening steps, step monitors and step restrictions).

• Configuration > Working with the Tightening Tab > Multistep Programs (Creating Multistep Program inserted into Adding a Multistep Program)

3.7

01/2022

NEW content:

• Configurations Tab > Tool Configuration > Configuration of the Open End

• Settings Tab > Configuration of the Server Connections > Configuring the Remote Logging Connection

• Settings Tab > Configuration of the Extended Logging

• Settings Tab > Configuration of the Extended Logging > Configuring the Log Groups

UPDATED content:

• Multistep Programs > Tightening Steps (TC - Torque Calibration)

• Multistep Programs > Step Monitors (C - Current, TC - Torque Calibration)

• Multistep Programs > Settings for a Multistep Program (Program Monitor - Time, Program Restriction - Angle, Program Restriction - Time)

• Multistep Programs > Step Restrictions (C - Current)

• Event Codes list

• Input Signals - Power Focus 8

• Input Signals - StepSync

• Output Signals - Power Focus 8

• Output Signals - StepSync

3.6

06/2021

First official release of the user guide for POWER FOCUS 8.