1. Power Focus XC
2. Installation
3. Installation Instructions
4. Installing the Controller

Installing the Controller

The controller must be positioned so that the power cable connection is easily accessible.

To make the controller free from electric power, pull out the power cable from the power cable connection on the controller.

For maximum tool performance, make sure that the controller is installed so that free airflow is provided. This improves the cooling of the controller.

1. Place the controller on a steady surface.

2. Connect the tool cable to the tool cable connection.

3. Make sure that the residual-current circuit breaker with overcurrent protection (RCBO) device is switched on.

4. Connect the power cable to the power cable connection.

5. Connect the power cable to a power supply.

6. Turn the power switch on.